Module regs
Source - Autocolresconfig
- Controls the auto collision resolution function. This setting must be done before the NFCT peripheral is activated.
- Errorstatus
- NFC Error Status register
- Fieldpresent
- Indicates the presence or not of a valid field
- Framedelaymax
- Maximum frame delay
- Framedelaymin
- Minimum frame delay
- Framedelaymode
- Configuration register for the Frame Delay Timer
- Int
- Enable or disable interrupt
- Last
- Last NFCID1 part (4, 7 or 10 bytes ID)
- Maxlen
- Size of the RAM buffer allocated to TXD and RXD data storage each
- Mode
- Configure EasyDMA mode
- Modulationctrl
- Enables the modulation output to a GPIO pin which can be connected to a second external antenna.
- Modulationpsel
- Pin select for Modulation control
- Nfctagstate
- Current operating state of NFC tag
- Padconfig
- NFC pad configuration
- Rx
- Result of last incoming frame
- RxdAmount
- Size of last incoming frame
- RxdFrameconfig
- Configuration of incoming frames
- Secondlast
- Second last NFCID1 part (7 or 10 bytes ID)
- Selres
- NFC-A SEL_RES auto-response settings
- Sensres
- NFC-A SENS_RES auto-response settings
- Shorts
- Shortcuts between local events and tasks
- Sleepstate
- Sleep state during automatic collision resolution
- Thirdlast
- Third last NFCID1 part (10 bytes ID)
- TxdAmount
- Size of outgoing frame
- TxdFrameconfig
- Configuration of outgoing frames