Expand description
Smart card (CCID) class.
Modules§
- device
- USB Chip/Smart Card Interface Device (CCID) device implementation.
- host
- USB Chip/Smart Card Interface Device (CCID) host support.
Structs§
- Slot
Status - Decoded
RDR_to_PC_SlotStatusresponse.
Enums§
- Card
State - Smart-card presence reported by a CCID slot.
Constants§
- CCID_
ERR_ BAD_ ATR - Bad ATR response from card.
- CCID_
ERR_ CMD_ NOT_ SUPPORTED - Command not supported.
- CCID_
ERR_ HW_ ERROR - Hardware error.
- CCID_
ERR_ ICC_ MUTE - ICC mute / unresponsive.
- CCID_
ERR_ NONE - No error.
- CCID_
ERR_ SLOT_ NOT_ FOUND - Slot does not exist.
- CCID_
ERR_ XFR_ OVERRUN - Transfer overrun.
- CCID_
FUNCTIONAL_ DESCRIPTOR bDescriptorTypeof the CCID class-specific functional descriptor.- CCID_
FUNCTIONAL_ LEN - Length in bytes of the standard CCID functional descriptor (54 bytes).
- CCID_
ICC_ NOT_ PRESENT - ICC not present.
- CCID_
ICC_ PRESENT_ ACTIVE - ICC present and active.
- CCID_
ICC_ PRESENT_ INACTIVE - ICC present and inactive.
- CCID_
MAX_ SLOT_ INDEX - Offset of
bMaxSlotIndexwithin the CCID functional descriptor. - CCID_
REQ_ ABORT - Abort command on control endpoint.
- CCID_
REQ_ GET_ CLOCK_ FREQUENCIES - Get clock frequencies supported by the reader.
- CCID_
REQ_ GET_ DATA_ RATES - Get data rates supported by the reader.
- CCID_
STATUS_ CMD_ FAILED - Command failed (see bError for reason).
- CCID_
STATUS_ CMD_ SUCCESS - Command executed without error.
- CCID_
STATUS_ TIME_ EXTENSION - Time extension requested.
- HEADER_
LEN - Header length of all CCID messages (10 bytes).
- MAX_
APDU_ LEN - Maximum standard short APDU payload length.
- MAX_
CCID_ MESSAGE_ LEN - Maximum standard CCID message length (10-byte header + 261-byte APDU).
- PC_
TO_ RDR_ ABORT - Abort an ongoing transfer.
- PC_
TO_ RDR_ ESCAPE - Vendor-specific escape command.
- PC_
TO_ RDR_ GET_ PARAMETERS - Get communication parameters for a slot.
- PC_
TO_ RDR_ GET_ SLOT_ STATUS - Query slot and card status.
- PC_
TO_ RDR_ ICC_ POWER_ OFF - Power off the smart card.
- PC_
TO_ RDR_ ICC_ POWER_ ON - Power on and reset the smart card (requests ATR).
- PC_
TO_ RDR_ RESET_ PARAMETERS - Reset communication parameters for a slot to defaults.
- PC_
TO_ RDR_ SECURE - Secure PIN verification/modification.
- PC_
TO_ RDR_ SET_ PARAMETERS - Set communication parameters for a slot.
- PC_
TO_ RDR_ XFR_ BLOCK - Transfer an APDU block to the smart card.
- RDR_
TO_ PC_ DATA_ BLOCK - Response carrying data (e.g. ATR or APDU response).
- RDR_
TO_ PC_ DATA_ RATE_ AND_ CLOCK_ FREQUENCY - Response carrying data rate and clock frequency.
- RDR_
TO_ PC_ ESCAPE - Response carrying escape data.
- RDR_
TO_ PC_ HARDWARE_ ERROR - Hardware error event.
- RDR_
TO_ PC_ NOTIFY_ SLOT_ CHANGE - Slot status change event.
- RDR_
TO_ PC_ PARAMETERS - Response carrying communication parameters.
- RDR_
TO_ PC_ SLOT_ STATUS - Response carrying slot and ICC status.
- USB_
CLASS_ CCID - USB Class code for CCID (Integrated Circuit(s) Cards Interface Device).
- USB_
PROTOCOL_ CCID - USB Protocol code for CCID.
- USB_
SUBCLASS_ CCID - USB Subclass code for CCID.