Module regs
- Bmrequesttype
- SETUP data, byte 0, bmRequestType.
- Brequest
- SETUP data, byte 1, bRequest.
- Dpdmvalue
- State D+ and D- lines will be forced into by the DPDMDRIVE task. The DPDMNODRIVE task reverts the control of the lines to MAC IP (no forcing).
- Dtoggle
- Data toggle control and status.
- Enable
- Enable USB.
- Epdatastatus
- Provides information on which endpoint(s) an acknowledged data transfer has occurred (EPDATA event).
- Epin
- Description collection: IN endpoint halted status. Can be used as is as response to a GetStatus() request to endpoint.
- EpinAmount
- Description cluster: Number of bytes transferred in the last transaction.
- EpinMaxcnt
- Description cluster: Maximum number of bytes to transfer.
- Epinen
- Endpoint IN enable.
- EpoutAmount
- Description cluster: Number of bytes transferred in the last transaction.
- EpoutMaxcnt
- Description cluster: Maximum number of bytes to transfer.
- Epouten
- Endpoint OUT enable.
- Epstall
- STALL endpoints.
- Epstatus
- Provides information on which endpoint’s EasyDMA registers have been captured.
- Eventcause
- Details on what caused the USBEVENT event.
- Framecntr
- Returns the current value of the start of frame counter.
- HaltedEpout
- Description collection: OUT endpoint halted status. Can be used as is as response to a GetStatus() request to endpoint.
- Int
- Enable or disable interrupt.
- IsoinAmount
- Number of bytes transferred in the last transaction.
- IsoinMaxcnt
- Maximum number of bytes to transfer.
- Isoinconfig
- Controls the response of the ISO IN endpoint to an IN token when no data is ready to be sent.
- Isoout
- Number of bytes received last on this ISO OUT data endpoint.
- IsooutAmount
- Number of bytes transferred in the last transaction.
- IsooutMaxcnt
- Maximum number of bytes to transfer.
- Isosplit
- Controls the split of ISO buffers.
- Lowpower
- Controls USBD peripheral Low-power mode during USB suspend.
- Shorts
- Shortcuts between local events and tasks.
- SizeEpout
- Description collection: Number of bytes received last in the data stage of this OUT endpoint.
- Usbaddr
- Device USB address.
- Usbpullup
- Control of the USB pull-up.
- Windexh
- SETUP data, byte 5, MSB of wIndex.
- Windexl
- SETUP data, byte 4, LSB of wIndex.
- Wlengthh
- SETUP data, byte 7, MSB of wLength.
- Wlengthl
- SETUP data, byte 6, LSB of wLength.
- Wvalueh
- SETUP data, byte 3, MSB of wValue.
- Wvaluel
- SETUP data, byte 2, LSB of wValue.