Struct Radio

pub struct Radio { /* private fields */ }

2.4 GHz radio

Implementations

impl Radio

pub const unsafe fn from_ptr(ptr: *mut ()) -> Radio

pub const fn as_ptr(&self) -> *mut ()

pub const fn tasks_txen(self) -> Reg<u32, W>

Enable RADIO in TX mode

pub const fn tasks_rxen(self) -> Reg<u32, W>

Enable RADIO in RX mode

pub const fn tasks_start(self) -> Reg<u32, W>

Start RADIO

pub const fn tasks_stop(self) -> Reg<u32, W>

Stop RADIO

pub const fn tasks_disable(self) -> Reg<u32, W>

Disable RADIO

pub const fn tasks_rssistart(self) -> Reg<u32, W>

Start the RSSI and take one single sample of the receive signal strength

pub const fn tasks_rssistop(self) -> Reg<u32, W>

Stop the RSSI measurement

pub const fn tasks_bcstart(self) -> Reg<u32, W>

Start the bit counter

pub const fn tasks_bcstop(self) -> Reg<u32, W>

Stop the bit counter

pub const fn tasks_edstart(self) -> Reg<u32, W>

Start the energy detect measurement used in IEEE 802.15.4 mode

pub const fn tasks_edstop(self) -> Reg<u32, W>

Stop the energy detect measurement

pub const fn tasks_ccastart(self) -> Reg<u32, W>

Start the clear channel assessment used in IEEE 802.15.4 mode

pub const fn tasks_ccastop(self) -> Reg<u32, W>

Stop the clear channel assessment

pub const fn subscribe_txen(self) -> Reg<Subscribe, RW>

Subscribe configuration for task TXEN

pub const fn subscribe_rxen(self) -> Reg<Subscribe, RW>

Subscribe configuration for task RXEN

pub const fn subscribe_start(self) -> Reg<Subscribe, RW>

Subscribe configuration for task START

pub const fn subscribe_stop(self) -> Reg<Subscribe, RW>

Subscribe configuration for task STOP

pub const fn subscribe_disable(self) -> Reg<Subscribe, RW>

Subscribe configuration for task DISABLE

pub const fn subscribe_rssistart(self) -> Reg<Subscribe, RW>

Subscribe configuration for task RSSISTART

pub const fn subscribe_rssistop(self) -> Reg<Subscribe, RW>

Subscribe configuration for task RSSISTOP

pub const fn subscribe_bcstart(self) -> Reg<Subscribe, RW>

Subscribe configuration for task BCSTART

pub const fn subscribe_bcstop(self) -> Reg<Subscribe, RW>

Subscribe configuration for task BCSTOP

pub const fn subscribe_edstart(self) -> Reg<Subscribe, RW>

Subscribe configuration for task EDSTART

pub const fn subscribe_edstop(self) -> Reg<Subscribe, RW>

Subscribe configuration for task EDSTOP

pub const fn subscribe_ccastart(self) -> Reg<Subscribe, RW>

Subscribe configuration for task CCASTART

pub const fn subscribe_ccastop(self) -> Reg<Subscribe, RW>

Subscribe configuration for task CCASTOP

pub const fn events_ready(self) -> Reg<u32, RW>

RADIO has ramped up and is ready to be started

pub const fn events_address(self) -> Reg<u32, RW>

Address sent or received

pub const fn events_payload(self) -> Reg<u32, RW>

Packet payload sent or received

pub const fn events_end(self) -> Reg<u32, RW>

Packet sent or received

pub const fn events_disabled(self) -> Reg<u32, RW>

RADIO has been disabled

pub const fn events_devmatch(self) -> Reg<u32, RW>

A device address match occurred on the last received packet

pub const fn events_devmiss(self) -> Reg<u32, RW>

No device address match occurred on the last received packet

pub const fn events_rssiend(self) -> Reg<u32, RW>

Sampling of receive signal strength complete

pub const fn events_bcmatch(self) -> Reg<u32, RW>

Bit counter reached bit count value

pub const fn events_crcok(self) -> Reg<u32, RW>

Packet received with CRC ok

pub const fn events_crcerror(self) -> Reg<u32, RW>

Packet received with CRC error

pub const fn events_framestart(self) -> Reg<u32, RW>

IEEE 802.15.4 length field received

pub const fn events_edend(self) -> Reg<u32, RW>

Sampling of energy detection complete. A new ED sample is ready for readout from the RADIO.EDSAMPLE register.

pub const fn events_edstopped(self) -> Reg<u32, RW>

The sampling of energy detection has stopped

pub const fn events_ccaidle(self) -> Reg<u32, RW>

Wireless medium in idle - clear to send

pub const fn events_ccabusy(self) -> Reg<u32, RW>

Wireless medium busy - do not send

pub const fn events_ccastopped(self) -> Reg<u32, RW>

The CCA has stopped

pub const fn events_rateboost(self) -> Reg<u32, RW>

Ble_LR CI field received, receive mode is changed from Ble_LR125Kbit to Ble_LR500Kbit.

pub const fn events_txready(self) -> Reg<u32, RW>

RADIO has ramped up and is ready to be started TX path

pub const fn events_rxready(self) -> Reg<u32, RW>

RADIO has ramped up and is ready to be started RX path

pub const fn events_mhrmatch(self) -> Reg<u32, RW>

MAC header match found

pub const fn events_sync(self) -> Reg<u32, RW>

Preamble indicator

pub const fn events_phyend(self) -> Reg<u32, RW>

Generated when last bit is sent on air, or received from air

pub const fn events_ctepresent(self) -> Reg<u32, RW>

CTE is present (early warning right after receiving CTEInfo byte)

pub const fn publish_ready(self) -> Reg<Publish, RW>

Publish configuration for event READY

pub const fn publish_address(self) -> Reg<Publish, RW>

Publish configuration for event ADDRESS

pub const fn publish_payload(self) -> Reg<Publish, RW>

Publish configuration for event PAYLOAD

pub const fn publish_end(self) -> Reg<Publish, RW>

Publish configuration for event END

pub const fn publish_disabled(self) -> Reg<Publish, RW>

Publish configuration for event DISABLED

pub const fn publish_devmatch(self) -> Reg<Publish, RW>

Publish configuration for event DEVMATCH

pub const fn publish_devmiss(self) -> Reg<Publish, RW>

Publish configuration for event DEVMISS

pub const fn publish_rssiend(self) -> Reg<Publish, RW>

Publish configuration for event RSSIEND

pub const fn publish_bcmatch(self) -> Reg<Publish, RW>

Publish configuration for event BCMATCH

pub const fn publish_crcok(self) -> Reg<Publish, RW>

Publish configuration for event CRCOK

pub const fn publish_crcerror(self) -> Reg<Publish, RW>

Publish configuration for event CRCERROR

pub const fn publish_framestart(self) -> Reg<Publish, RW>

Publish configuration for event FRAMESTART

pub const fn publish_edend(self) -> Reg<Publish, RW>

Publish configuration for event EDEND

pub const fn publish_edstopped(self) -> Reg<Publish, RW>

Publish configuration for event EDSTOPPED

pub const fn publish_ccaidle(self) -> Reg<Publish, RW>

Publish configuration for event CCAIDLE

pub const fn publish_ccabusy(self) -> Reg<Publish, RW>

Publish configuration for event CCABUSY

pub const fn publish_ccastopped(self) -> Reg<Publish, RW>

Publish configuration for event CCASTOPPED

pub const fn publish_rateboost(self) -> Reg<Publish, RW>

Publish configuration for event RATEBOOST

pub const fn publish_txready(self) -> Reg<Publish, RW>

Publish configuration for event TXREADY

pub const fn publish_rxready(self) -> Reg<Publish, RW>

Publish configuration for event RXREADY

pub const fn publish_mhrmatch(self) -> Reg<Publish, RW>

Publish configuration for event MHRMATCH

pub const fn publish_sync(self) -> Reg<Publish, RW>

Publish configuration for event SYNC

pub const fn publish_phyend(self) -> Reg<Publish, RW>

Publish configuration for event PHYEND

pub const fn publish_ctepresent(self) -> Reg<Publish, RW>

Publish configuration for event CTEPRESENT

pub const fn shorts(self) -> Reg<Shorts, RW>

Shortcuts between local events and tasks

pub const fn intenset(self) -> Reg<Int, RW>

Enable interrupt

pub const fn intenclr(self) -> Reg<Int, RW>

Disable interrupt

pub const fn crcstatus(self) -> Reg<Crcstatus, R>

CRC status

pub const fn rxmatch(self) -> Reg<Rxmatch, R>

Received address

pub const fn rxcrc(self) -> Reg<Rxcrc, R>

CRC field of previously received packet

pub const fn dai(self) -> Reg<Dai, R>

Device address match index

pub const fn pdustat(self) -> Reg<Pdustat, R>

Payload status

pub const fn ctestatus(self) -> Reg<Ctestatus, R>

CTEInfo parsed from received packet

pub const fn dfestatus(self) -> Reg<Dfestatus, R>

DFE status information

pub const fn packetptr(self) -> Reg<u32, RW>

Packet pointer

pub const fn frequency(self) -> Reg<Frequency, RW>

Frequency

pub const fn txpower(self) -> Reg<Txpower, RW>

Output power

pub const fn mode(self) -> Reg<Mode, RW>

Data rate and modulation

pub const fn pcnf0(self) -> Reg<Pcnf0, RW>

Packet configuration register 0

pub const fn pcnf1(self) -> Reg<Pcnf1, RW>

Packet configuration register 1

pub const fn base0(self) -> Reg<u32, RW>

Base address 0

pub const fn base1(self) -> Reg<u32, RW>

Base address 1

pub const fn prefix0(self) -> Reg<Prefix0, RW>

Prefixes bytes for logical addresses 0-3

pub const fn prefix1(self) -> Reg<Prefix1, RW>

Prefixes bytes for logical addresses 4-7

pub const fn txaddress(self) -> Reg<Txaddress, RW>

Transmit address select

pub const fn rxaddresses(self) -> Reg<Rxaddresses, RW>

Receive address select

pub const fn crccnf(self) -> Reg<Crccnf, RW>

CRC configuration

pub const fn crcpoly(self) -> Reg<Crcpoly, RW>

CRC polynomial

pub const fn crcinit(self) -> Reg<Crcinit, RW>

CRC initial value

pub const fn tifs(self) -> Reg<Tifs, RW>

Interframe spacing in us

pub const fn rssisample(self) -> Reg<Rssisample, R>

RSSI sample

pub const fn state(self) -> Reg<State, R>

Current radio state

pub const fn datawhiteiv(self) -> Reg<Datawhiteiv, RW>

Data whitening initial value

pub const fn bcc(self) -> Reg<u32, RW>

Bit counter compare

pub const fn dab(self, n: usize) -> Reg<u32, RW>

Description collection: Device address base segment n

pub const fn dap(self, n: usize) -> Reg<Dap, RW>

Description collection: Device address prefix n

pub const fn dacnf(self) -> Reg<Dacnf, RW>

Device address match configuration

pub const fn mhrmatchconf(self) -> Reg<u32, RW>

Search pattern configuration

pub const fn mhrmatchmas(self) -> Reg<u32, RW>

Pattern mask

pub const fn modecnf0(self) -> Reg<Modecnf0, RW>

Radio mode configuration register 0

pub const fn sfd(self) -> Reg<Sfd, RW>

IEEE 802.15.4 start of frame delimiter

pub const fn edcnt(self) -> Reg<Edcnt, RW>

IEEE 802.15.4 energy detect loop count

pub const fn edsample(self) -> Reg<Edsample, R>

IEEE 802.15.4 energy detect level

pub const fn ccactrl(self) -> Reg<Ccactrl, RW>

IEEE 802.15.4 clear channel assessment control

pub const fn dfemode(self) -> Reg<Dfemode, RW>

Whether to use Angle-of-Arrival (AOA) or Angle-of-Departure (AOD)

pub const fn cteinlineconf(self) -> Reg<Cteinlineconf, RW>

Configuration for CTE inline mode

pub const fn dfectrl1(self) -> Reg<Dfectrl1, RW>

Various configuration for Direction finding

pub const fn dfectrl2(self) -> Reg<Dfectrl2, RW>

Start offset for Direction finding

pub const fn switchpattern(self) -> Reg<Switchpattern, RW>

GPIO patterns to be used for each antenna

pub const fn clearpattern(self) -> Reg<Clearpattern, RW>

Clear the GPIO pattern array for antenna control

pub const fn psel(self) -> Psel

Unspecified

pub const fn dfepacket(self) -> Dfepacket

DFE packet EasyDMA channel

pub const fn power(self) -> Reg<Power, RW>

Peripheral power control

Trait Implementations

impl Clone for Radio

fn clone(&self) -> Radio

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl PartialEq for Radio

fn eq(&self, other: &Radio) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Radio

impl Eq for Radio

impl Send for Radio

impl StructuralPartialEq for Radio

impl Sync for Radio