Struct Radio 

pub struct Radio { /* private fields */ }

2.4 GHz radio 0.

Implementations

impl Radio

pub const unsafe fn from_ptr(ptr: *mut ()) -> Radio

pub const fn as_ptr(&self) -> *mut ()

pub const fn tasks_txen(self) -> Reg<u32, W>

Enable RADIO in TX mode.

pub const fn tasks_rxen(self) -> Reg<u32, W>

Enable RADIO in RX mode.

pub const fn tasks_start(self) -> Reg<u32, W>

Start RADIO.

pub const fn tasks_stop(self) -> Reg<u32, W>

Stop RADIO.

pub const fn tasks_disable(self) -> Reg<u32, W>

Disable RADIO.

pub const fn tasks_rssistart(self) -> Reg<u32, W>

Start the RSSI and take one single sample of the receive signal strength.

pub const fn tasks_bcstart(self) -> Reg<u32, W>

Start the bit counter.

pub const fn tasks_bcstop(self) -> Reg<u32, W>

Stop the bit counter.

pub const fn tasks_edstart(self) -> Reg<u32, W>

Start the energy detect measurement used in IEEE 802.15.4 mode.

pub const fn tasks_edstop(self) -> Reg<u32, W>

Stop the energy detect measurement.

pub const fn tasks_ccastart(self) -> Reg<u32, W>

Start the clear channel assessment used in IEEE 802.15.4 mode.

pub const fn tasks_ccastop(self) -> Reg<u32, W>

Stop the clear channel assessment.

pub const fn tasks_auxdatadmastart(self) -> Reg<u32, W>

Start DMA transaction of acquisition.

pub const fn tasks_auxdatadmastop(self) -> Reg<u32, W>

Stop ongoing DMA transaction of acquisition.

pub const fn tasks_pllen(self) -> Reg<u32, W>

Enable RADIO in PLL mode (standby for either TX or RX).

pub const fn tasks_cstonesstart(self) -> Reg<u32, W>

Start tone processing for channel sounding.

pub const fn tasks_softreset(self) -> Reg<u32, W>

Reset all public registers, but with these exceptions: DMA registers and EVENT/INTEN/SUBSCRIBE/PUBLISH registers. Only to be used in DISABLED state.

pub const fn subscribe_txen(self) -> Reg<Subscribe, RW>

Subscribe configuration for task TXEN.

pub const fn subscribe_rxen(self) -> Reg<Subscribe, RW>

Subscribe configuration for task RXEN.

pub const fn subscribe_start(self) -> Reg<Subscribe, RW>

Subscribe configuration for task START.

pub const fn subscribe_stop(self) -> Reg<Subscribe, RW>

Subscribe configuration for task STOP.

pub const fn subscribe_disable(self) -> Reg<Subscribe, RW>

Subscribe configuration for task DISABLE.

pub const fn subscribe_rssistart(self) -> Reg<Subscribe, RW>

Subscribe configuration for task RSSISTART.

pub const fn subscribe_bcstart(self) -> Reg<Subscribe, RW>

Subscribe configuration for task BCSTART.

pub const fn subscribe_bcstop(self) -> Reg<Subscribe, RW>

Subscribe configuration for task BCSTOP.

pub const fn subscribe_edstart(self) -> Reg<Subscribe, RW>

Subscribe configuration for task EDSTART.

pub const fn subscribe_edstop(self) -> Reg<Subscribe, RW>

Subscribe configuration for task EDSTOP.

pub const fn subscribe_ccastart(self) -> Reg<Subscribe, RW>

Subscribe configuration for task CCASTART.

pub const fn subscribe_ccastop(self) -> Reg<Subscribe, RW>

Subscribe configuration for task CCASTOP.

pub const fn subscribe_auxdatadmastart(self) -> Reg<Subscribe, RW>

Subscribe configuration for task AUXDATADMASTART.

pub const fn subscribe_auxdatadmastop(self) -> Reg<Subscribe, RW>

Subscribe configuration for task AUXDATADMASTOP.

pub const fn subscribe_pllen(self) -> Reg<Subscribe, RW>

Subscribe configuration for task PLLEN.

pub const fn subscribe_cstonesstart(self) -> Reg<Subscribe, RW>

Subscribe configuration for task CSTONESSTART.

pub const fn subscribe_softreset(self) -> Reg<Subscribe, RW>

Subscribe configuration for task SOFTRESET.

pub const fn events_ready(self) -> Reg<u32, RW>

RADIO has ramped up and is ready to be started.

pub const fn events_txready(self) -> Reg<u32, RW>

RADIO has ramped up and is ready to be started TX path.

pub const fn events_rxready(self) -> Reg<u32, RW>

RADIO has ramped up and is ready to be started RX path.

pub const fn events_address(self) -> Reg<u32, RW>

Address sent or received.

pub const fn events_framestart(self) -> Reg<u32, RW>

IEEE 802.15.4 length field received.

pub const fn events_payload(self) -> Reg<u32, RW>

Packet payload sent or received.

pub const fn events_end(self) -> Reg<u32, RW>

Memory access for packet data has been completed.

pub const fn events_phyend(self) -> Reg<u32, RW>

The last bit is sent on air or last bit is received.

pub const fn events_disabled(self) -> Reg<u32, RW>

RADIO has been disabled.

pub const fn events_devmatch(self) -> Reg<u32, RW>

A device address match occurred on the last received packet.

pub const fn events_devmiss(self) -> Reg<u32, RW>

No device address match occurred on the last received packet.

pub const fn events_crcok(self) -> Reg<u32, RW>

Packet received with CRC ok.

pub const fn events_crcerror(self) -> Reg<u32, RW>

Packet received with CRC error.

pub const fn events_bcmatch(self) -> Reg<u32, RW>

Bit counter reached bit count value.

pub const fn events_edend(self) -> Reg<u32, RW>

Sampling of energy detection complete (a new ED sample is ready for readout from the RADIO.EDSAMPLE register).

pub const fn events_edstopped(self) -> Reg<u32, RW>

The sampling of energy detection has stopped.

pub const fn events_ccaidle(self) -> Reg<u32, RW>

Wireless medium in idle - clear to send.

pub const fn events_ccabusy(self) -> Reg<u32, RW>

Wireless medium busy - do not send.

pub const fn events_ccastopped(self) -> Reg<u32, RW>

The CCA has stopped.

pub const fn events_rateboost(self) -> Reg<u32, RW>

Ble_LR CI field received, receive mode is changed from Ble_LR125Kbit to Ble_LR500Kbit.

pub const fn events_mhrmatch(self) -> Reg<u32, RW>

MAC header match found.

pub const fn events_sync(self) -> Reg<u32, RW>

Initial sync detected.

pub const fn events_ctepresent(self) -> Reg<u32, RW>

CTEInfo byte is received.

pub const fn events_pllready(self) -> Reg<u32, RW>

PLL has settled and RADIO is ready to be enabled in either TX or RX mode.

pub const fn events_rxaddress(self) -> Reg<u32, RW>

Address received.

pub const fn events_auxdatadmaend(self) -> Reg<u32, RW>

AUXDATA DMA end.

pub const fn events_cstonesend(self) -> Reg<u32, RW>

The channel sounding tone processing is complete.

pub const fn publish_ready(self) -> Reg<Publish, RW>

Publish configuration for event READY.

pub const fn publish_txready(self) -> Reg<Publish, RW>

Publish configuration for event TXREADY.

pub const fn publish_rxready(self) -> Reg<Publish, RW>

Publish configuration for event RXREADY.

pub const fn publish_address(self) -> Reg<Publish, RW>

Publish configuration for event ADDRESS.

pub const fn publish_framestart(self) -> Reg<Publish, RW>

Publish configuration for event FRAMESTART.

pub const fn publish_payload(self) -> Reg<Publish, RW>

Publish configuration for event PAYLOAD.

pub const fn publish_end(self) -> Reg<Publish, RW>

Publish configuration for event END.

pub const fn publish_phyend(self) -> Reg<Publish, RW>

Publish configuration for event PHYEND.

pub const fn publish_disabled(self) -> Reg<Publish, RW>

Publish configuration for event DISABLED.

pub const fn publish_devmatch(self) -> Reg<Publish, RW>

Publish configuration for event DEVMATCH.

pub const fn publish_devmiss(self) -> Reg<Publish, RW>

Publish configuration for event DEVMISS.

pub const fn publish_crcok(self) -> Reg<Publish, RW>

Publish configuration for event CRCOK.

pub const fn publish_crcerror(self) -> Reg<Publish, RW>

Publish configuration for event CRCERROR.

pub const fn publish_bcmatch(self) -> Reg<Publish, RW>

Publish configuration for event BCMATCH.

pub const fn publish_edend(self) -> Reg<Publish, RW>

Publish configuration for event EDEND.

pub const fn publish_edstopped(self) -> Reg<Publish, RW>

Publish configuration for event EDSTOPPED.

pub const fn publish_ccaidle(self) -> Reg<Publish, RW>

Publish configuration for event CCAIDLE.

pub const fn publish_ccabusy(self) -> Reg<Publish, RW>

Publish configuration for event CCABUSY.

pub const fn publish_ccastopped(self) -> Reg<Publish, RW>

Publish configuration for event CCASTOPPED.

pub const fn publish_rateboost(self) -> Reg<Publish, RW>

Publish configuration for event RATEBOOST.

pub const fn publish_mhrmatch(self) -> Reg<Publish, RW>

Publish configuration for event MHRMATCH.

pub const fn publish_sync(self) -> Reg<Publish, RW>

Publish configuration for event SYNC.

pub const fn publish_ctepresent(self) -> Reg<Publish, RW>

Publish configuration for event CTEPRESENT.

pub const fn publish_pllready(self) -> Reg<Publish, RW>

Publish configuration for event PLLREADY.

pub const fn publish_rxaddress(self) -> Reg<Publish, RW>

Publish configuration for event RXADDRESS.

pub const fn publish_auxdatadmaend(self) -> Reg<Publish, RW>

Publish configuration for event AUXDATADMAEND.

pub const fn publish_cstonesend(self) -> Reg<Publish, RW>

Publish configuration for event CSTONESEND.

pub const fn shorts(self) -> Reg<Shorts, RW>

Shortcuts between local events and tasks.

pub const fn intenset0(self, n: usize) -> Reg<Int0, RW>

Enable interrupt.

pub const fn intenset1(self, n: usize) -> Reg<Int1, RW>

Enable interrupt.

pub const fn intenclr0(self, n: usize) -> Reg<Int0, RW>

Disable interrupt.

pub const fn intenclr1(self, n: usize) -> Reg<Int1, RW>

Disable interrupt.

pub const fn mode(self) -> Reg<RadioMode, RW>

Data rate and modulation.

pub const fn phyendtxdelay(self) -> Reg<Phyendtxdelay, RW>

Configurable delay of PHYEND event for TX.

pub const fn state(self) -> Reg<State, R>

Current radio state.

pub const fn edctrl(self) -> Reg<Edctrl, RW>

IEEE 802.15.4 energy detect control.

pub const fn edsample(self) -> Reg<Edsample, R>

IEEE 802.15.4 energy detect level.

pub const fn ccactrl(self) -> Reg<Ccactrl, RW>

IEEE 802.15.4 clear channel assessment control.

pub const fn datawhite(self) -> Reg<Datawhite, RW>

Data whitening configuration.

pub const fn auxdata(self) -> Auxdata

Unspecified.

pub const fn auxdatadma(self, n: usize) -> Auxdatadma

Unspecified.

pub const fn timing(self) -> Reg<Timing, RW>

Timing.

pub const fn frequency(self) -> Reg<Frequency, RW>

Frequency.

pub const fn txpower(self) -> Reg<Txpower, RW>

Output power.

pub const fn tifs(self) -> Reg<Tifs, RW>

Interframe spacing in us.

pub const fn rssisample(self) -> Reg<Rssisample, R>

RSSI sample.

pub const fn rxgain(self) -> Rxgain

Unspecified.

pub const fn freqfinetune(self) -> Reg<Freqfinetune, RW>

Fine tuning of the RF frequency.

pub const fn feconfig(self) -> Reg<Feconfig, RW>

Config register.

pub const fn cfo_stat(self) -> Reg<CfoStat, R>

Carrier freq. offset estimate.

pub const fn dbccorr(self) -> Reg<Dbccorr, RW>

Correlator thresholds.

pub const fn dfemode(self) -> Reg<Dfemode, RW>

Whether to use Angle-of-Arrival (AOA) or Angle-of-Departure (AOD).

pub const fn dfestatus(self) -> Reg<Dfestatus, R>

DFE status information.

pub const fn dfectrl1(self) -> Reg<Dfectrl1, RW>

Various configuration for Direction finding.

pub const fn dfectrl2(self) -> Reg<Dfectrl2, RW>

Start offset for Direction finding.

pub const fn switchpattern(self) -> Reg<Switchpattern, RW>

GPIO patterns to be used for each antenna.

pub const fn clearpattern(self) -> Reg<Clearpattern, W>

Clear the GPIO pattern array for antenna control.

pub const fn psel(self) -> Psel

Unspecified.

pub const fn dfepacket(self) -> Dfepacket

DFE packet EasyDMA channel.

pub const fn crcstatus(self) -> Reg<Crcstatus, R>

CRC status.

pub const fn rxmatch(self) -> Reg<Rxmatch, R>

Received address.

pub const fn rxcrc(self) -> Reg<Rxcrc, R>

CRC field of previously received packet.

pub const fn dai(self) -> Reg<Dai, R>

Device address match index.

pub const fn pdustat(self) -> Reg<Pdustat, R>

Payload status.

pub const fn pcnf0(self) -> Reg<Pcnf0, RW>

Packet configuration register 0.

pub const fn pcnf1(self) -> Reg<Pcnf1, RW>

Packet configuration register 1.

pub const fn base0(self) -> Reg<u32, RW>

Base address 0.

pub const fn base1(self) -> Reg<u32, RW>

Base address 1.

pub const fn prefix0(self) -> Reg<Prefix0, RW>

Prefixes bytes for logical addresses 0-3.

pub const fn prefix1(self) -> Reg<Prefix1, RW>

Prefixes bytes for logical addresses 4-7.

pub const fn txaddress(self) -> Reg<Txaddress, RW>

Transmit address select.

pub const fn rxaddresses(self) -> Reg<Rxaddresses, RW>

Receive address select.

pub const fn crccnf(self) -> Reg<Crccnf, RW>

CRC configuration.

pub const fn crcpoly(self) -> Reg<Crcpoly, RW>

CRC polynomial.

pub const fn crcinit(self) -> Reg<Crcinit, RW>

CRC initial value.

pub const fn dab(self, n: usize) -> Reg<u32, RW>

Description collection: Device address base segment n.

pub const fn dap(self, n: usize) -> Reg<Dap, RW>

Description collection: Device address prefix n.

pub const fn dacnf(self) -> Reg<Dacnf, RW>

Device address match configuration.

pub const fn bcc(self) -> Reg<u32, RW>

Bit counter compare.

pub const fn ctestatus(self) -> Reg<Ctestatus, R>

CTEInfo parsed from received packet.

pub const fn mhrmatchconf(self) -> Reg<u32, RW>

Search pattern configuration.

pub const fn mhrmatchmask(self) -> Reg<u32, RW>

Pattern mask.

pub const fn sfd(self) -> Reg<Sfd, RW>

IEEE 802.15.4 start of frame delimiter.

pub const fn cteinlineconf(self) -> Reg<Cteinlineconf, RW>

Configuration for CTE inline mode.

pub const fn packetptr(self) -> Reg<u32, RW>

Packet pointer.

pub const fn cstones(self) -> Cstones

Unspecified.

pub const fn rtt(self) -> Rtt

Unspecified.

Trait Implementations

impl Clone for Radio

fn clone(&self) -> Radio

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl PartialEq for Radio

fn eq(&self, other: &Radio) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Radio

impl Eq for Radio

impl Send for Radio

impl StructuralPartialEq for Radio

impl Sync for Radio