Struct Trcvipcssctlr

#[repr(transparent)]
pub struct Trcvipcssctlr(pub u32);

Use this to set, or read, which PE comparator inputs can control the ViewInst start/stop logic. Might ignore writes when the trace unit is enabled or not idle. If implemented then this register must be programmed.

Tuple Fields

0: u32

Implementations

impl Trcvipcssctlr

pub const fn start_0(&self) -> bool

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of starting trace

pub fn set_start_0(&mut self, val: bool)

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of starting trace

pub const fn start_1(&self) -> bool

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of starting trace

pub fn set_start_1(&mut self, val: bool)

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of starting trace

pub const fn start_2(&self) -> bool

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of starting trace

pub fn set_start_2(&mut self, val: bool)

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of starting trace

pub const fn start_3(&self) -> bool

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of starting trace

pub fn set_start_3(&mut self, val: bool)

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of starting trace

pub const fn start_4(&self) -> bool

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of starting trace

pub fn set_start_4(&mut self, val: bool)

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of starting trace

pub const fn start_5(&self) -> bool

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of starting trace

pub fn set_start_5(&mut self, val: bool)

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of starting trace

pub const fn start_6(&self) -> bool

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of starting trace

pub fn set_start_6(&mut self, val: bool)

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of starting trace

pub const fn start_7(&self) -> bool

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of starting trace

pub fn set_start_7(&mut self, val: bool)

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of starting trace

pub const fn stop_0(&self) -> bool

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of stopping trace.

pub fn set_stop_0(&mut self, val: bool)

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of stopping trace.

pub const fn stop_1(&self) -> bool

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of stopping trace.

pub fn set_stop_1(&mut self, val: bool)

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of stopping trace.

pub const fn stop_2(&self) -> bool

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of stopping trace.

pub fn set_stop_2(&mut self, val: bool)

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of stopping trace.

pub const fn stop_3(&self) -> bool

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of stopping trace.

pub fn set_stop_3(&mut self, val: bool)

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of stopping trace.

pub const fn stop_4(&self) -> bool

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of stopping trace.

pub fn set_stop_4(&mut self, val: bool)

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of stopping trace.

pub const fn stop_5(&self) -> bool

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of stopping trace.

pub fn set_stop_5(&mut self, val: bool)

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of stopping trace.

pub const fn stop_6(&self) -> bool

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of stopping trace.

pub fn set_stop_6(&mut self, val: bool)

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of stopping trace.

pub const fn stop_7(&self) -> bool

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of stopping trace.

pub fn set_stop_7(&mut self, val: bool)

Selects which PE comparator inputs are in use with ViewInst start/stop control, for the purpose of stopping trace.

Trait Implementations

impl Clone for Trcvipcssctlr

fn clone(&self) -> Trcvipcssctlr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Trcvipcssctlr

fn default() -> Trcvipcssctlr

Returns the “default value” for a type.

impl PartialEq for Trcvipcssctlr

fn eq(&self, other: &Trcvipcssctlr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Trcvipcssctlr

impl Eq for Trcvipcssctlr

impl StructuralPartialEq for Trcvipcssctlr