Struct Pwm

pub struct Pwm { /* private fields */ }

Pulse width modulation unit 0

Implementations

impl Pwm

pub const unsafe fn from_ptr(ptr: *mut ()) -> Pwm

pub const fn as_ptr(&self) -> *mut ()

pub const fn tasks_stop(self) -> Reg<u32, W>

Stops PWM pulse generation on all channels at the end of current PWM period, and stops sequence playback

pub const fn tasks_nextstep(self) -> Reg<u32, W>

Steps by one value in the current sequence on all enabled channels if DECODER.MODE=NextStep. Does not cause PWM generation to start if not running.

pub const fn tasks_dma(self) -> TasksDma

Peripheral tasks.

pub const fn subscribe_stop(self) -> Reg<Subscribe, RW>

Subscribe configuration for task STOP

pub const fn subscribe_nextstep(self) -> Reg<Subscribe, RW>

Subscribe configuration for task NEXTSTEP

pub const fn subscribe_dma(self) -> SubscribeDma

Subscribe configuration for tasks

pub const fn events_stopped(self) -> Reg<u32, RW>

Response to STOP task, emitted when PWM pulses are no longer generated

pub const fn events_seqstarted(self, n: usize) -> Reg<u32, RW>

Description collection: First PWM period started on sequence n

pub const fn events_seqend(self, n: usize) -> Reg<u32, RW>

Description collection: Emitted at end of every sequence n, when last value from RAM has been applied to wave counter

pub const fn events_pwmperiodend(self) -> Reg<u32, RW>

Emitted at the end of each PWM period

pub const fn events_loopsdone(self) -> Reg<u32, RW>

Concatenated sequences have been played the amount of times defined in LOOP.CNT

pub const fn events_ramunderflow(self) -> Reg<u32, RW>

Emitted when retrieving from RAM does not complete in time for the PWM module

pub const fn events_dma(self) -> EventsDma

Peripheral events.

pub const fn events_comparematch(self, n: usize) -> Reg<u32, RW>

Description collection: This event is generated when the compare matches for the compare channel [n].

pub const fn publish_stopped(self) -> Reg<Publish, RW>

Publish configuration for event STOPPED

pub const fn publish_seqstarted(self, n: usize) -> Reg<Publish, RW>

Description collection: Publish configuration for event SEQSTARTED[n]

pub const fn publish_seqend(self, n: usize) -> Reg<Publish, RW>

Description collection: Publish configuration for event SEQEND[n]

pub const fn publish_pwmperiodend(self) -> Reg<Publish, RW>

Publish configuration for event PWMPERIODEND

pub const fn publish_loopsdone(self) -> Reg<Publish, RW>

Publish configuration for event LOOPSDONE

pub const fn publish_ramunderflow(self) -> Reg<Publish, RW>

Publish configuration for event RAMUNDERFLOW

pub const fn publish_dma(self) -> PublishDma

Publish configuration for events

pub const fn publish_comparematch(self, n: usize) -> Reg<Publish, RW>

Description collection: Publish configuration for event COMPAREMATCH[n]

pub const fn shorts(self) -> Reg<Shorts, RW>

Shortcuts between local events and tasks

pub const fn inten(self) -> Reg<Int, RW>

Enable or disable interrupt

pub const fn intenset(self) -> Reg<Int, RW>

Enable interrupt

pub const fn intenclr(self) -> Reg<Int, RW>

Disable interrupt

pub const fn intpend(self) -> Reg<Int, R>

Pending interrupts

pub const fn enable(self) -> Reg<Enable, RW>

PWM module enable register

pub const fn mode(self) -> Reg<Mode, RW>

Selects operating mode of the wave counter

pub const fn countertop(self) -> Reg<Countertop, RW>

Value up to which the pulse generator counter counts

pub const fn prescaler(self) -> Reg<Prescaler, RW>

Configuration for PWM_CLK

pub const fn decoder(self) -> Reg<Decoder, RW>

Configuration of the decoder

pub const fn loop_(self) -> Reg<Loop, RW>

Number of playbacks of a loop

pub const fn idleout(self) -> Reg<Idleout, RW>

Configure the output value on the PWM channel during idle

pub const fn seq(self, n: usize) -> PwmSeq

Unspecified

pub const fn psel(self) -> Psel

Unspecified

pub const fn dma(self) -> Dma

Unspecified

Trait Implementations

impl Clone for Pwm

fn clone(&self) -> Pwm

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl PartialEq for Pwm

fn eq(&self, other: &Pwm) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Pwm

impl Eq for Pwm

impl Send for Pwm

impl StructuralPartialEq for Pwm

impl Sync for Pwm