Struct Supportedportsizes

#[repr(transparent)]
pub struct Supportedportsizes(pub u32);

Each bit location is a single port size that is supported on the device.

Tuple Fields

0: u32

Implementations

impl Supportedportsizes

pub const fn port_size_1(&self) -> bool

Indicates whether the TPIU supports port size of 1-bit.

pub fn set_port_size_1(&mut self, val: bool)

Indicates whether the TPIU supports port size of 1-bit.

pub const fn port_size_2(&self) -> bool

Indicates whether the TPIU supports port size of 2-bit.

pub fn set_port_size_2(&mut self, val: bool)

Indicates whether the TPIU supports port size of 2-bit.

pub const fn port_size_3(&self) -> bool

Indicates whether the TPIU supports port size of 3-bit.

pub fn set_port_size_3(&mut self, val: bool)

Indicates whether the TPIU supports port size of 3-bit.

pub const fn port_size_4(&self) -> bool

Indicates whether the TPIU supports port size of 4-bit.

pub fn set_port_size_4(&mut self, val: bool)

Indicates whether the TPIU supports port size of 4-bit.

pub const fn port_size_5(&self) -> bool

Indicates whether the TPIU supports port size of 5-bit.

pub fn set_port_size_5(&mut self, val: bool)

Indicates whether the TPIU supports port size of 5-bit.

pub const fn port_size_6(&self) -> bool

Indicates whether the TPIU supports port size of 6-bit.

pub fn set_port_size_6(&mut self, val: bool)

Indicates whether the TPIU supports port size of 6-bit.

pub const fn port_size_7(&self) -> bool

Indicates whether the TPIU supports port size of 7-bit.

pub fn set_port_size_7(&mut self, val: bool)

Indicates whether the TPIU supports port size of 7-bit.

pub const fn port_size_8(&self) -> bool

Indicates whether the TPIU supports port size of 8-bit.

pub fn set_port_size_8(&mut self, val: bool)

Indicates whether the TPIU supports port size of 8-bit.

pub const fn port_size_9(&self) -> bool

Indicates whether the TPIU supports port size of 9-bit.

pub fn set_port_size_9(&mut self, val: bool)

Indicates whether the TPIU supports port size of 9-bit.

pub const fn port_size_10(&self) -> bool

Indicates whether the TPIU supports port size of 10-bit.

pub fn set_port_size_10(&mut self, val: bool)

Indicates whether the TPIU supports port size of 10-bit.

pub const fn port_size_11(&self) -> bool

Indicates whether the TPIU supports port size of 11-bit.

pub fn set_port_size_11(&mut self, val: bool)

Indicates whether the TPIU supports port size of 11-bit.

pub const fn port_size_12(&self) -> bool

Indicates whether the TPIU supports port size of 12-bit.

pub fn set_port_size_12(&mut self, val: bool)

Indicates whether the TPIU supports port size of 12-bit.

pub const fn port_size_13(&self) -> bool

Indicates whether the TPIU supports port size of 13-bit.

pub fn set_port_size_13(&mut self, val: bool)

Indicates whether the TPIU supports port size of 13-bit.

pub const fn port_size_14(&self) -> bool

Indicates whether the TPIU supports port size of 14-bit.

pub fn set_port_size_14(&mut self, val: bool)

Indicates whether the TPIU supports port size of 14-bit.

pub const fn port_size_15(&self) -> bool

Indicates whether the TPIU supports port size of 15-bit.

pub fn set_port_size_15(&mut self, val: bool)

Indicates whether the TPIU supports port size of 15-bit.

pub const fn port_size_16(&self) -> bool

Indicates whether the TPIU supports port size of 16-bit.

pub fn set_port_size_16(&mut self, val: bool)

Indicates whether the TPIU supports port size of 16-bit.

pub const fn port_size_17(&self) -> bool

Indicates whether the TPIU supports port size of 17-bit.

pub fn set_port_size_17(&mut self, val: bool)

Indicates whether the TPIU supports port size of 17-bit.

pub const fn port_size_18(&self) -> bool

Indicates whether the TPIU supports port size of 18-bit.

pub fn set_port_size_18(&mut self, val: bool)

Indicates whether the TPIU supports port size of 18-bit.

pub const fn port_size_19(&self) -> bool

Indicates whether the TPIU supports port size of 19-bit.

pub fn set_port_size_19(&mut self, val: bool)

Indicates whether the TPIU supports port size of 19-bit.

pub const fn port_size_20(&self) -> bool

Indicates whether the TPIU supports port size of 20-bit.

pub fn set_port_size_20(&mut self, val: bool)

Indicates whether the TPIU supports port size of 20-bit.

pub const fn port_size_21(&self) -> bool

Indicates whether the TPIU supports port size of 21-bit.

pub fn set_port_size_21(&mut self, val: bool)

Indicates whether the TPIU supports port size of 21-bit.

pub const fn port_size_22(&self) -> bool

Indicates whether the TPIU supports port size of 22-bit.

pub fn set_port_size_22(&mut self, val: bool)

Indicates whether the TPIU supports port size of 22-bit.

pub const fn port_size_23(&self) -> bool

Indicates whether the TPIU supports port size of 23-bit.

pub fn set_port_size_23(&mut self, val: bool)

Indicates whether the TPIU supports port size of 23-bit.

pub const fn port_size_24(&self) -> bool

Indicates whether the TPIU supports port size of 24-bit.

pub fn set_port_size_24(&mut self, val: bool)

Indicates whether the TPIU supports port size of 24-bit.

pub const fn port_size_25(&self) -> bool

Indicates whether the TPIU supports port size of 25-bit.

pub fn set_port_size_25(&mut self, val: bool)

Indicates whether the TPIU supports port size of 25-bit.

pub const fn port_size_26(&self) -> bool

Indicates whether the TPIU supports port size of 26-bit.

pub fn set_port_size_26(&mut self, val: bool)

Indicates whether the TPIU supports port size of 26-bit.

pub const fn port_size_27(&self) -> bool

Indicates whether the TPIU supports port size of 27-bit.

pub fn set_port_size_27(&mut self, val: bool)

Indicates whether the TPIU supports port size of 27-bit.

pub const fn port_size_28(&self) -> bool

Indicates whether the TPIU supports port size of 28-bit.

pub fn set_port_size_28(&mut self, val: bool)

Indicates whether the TPIU supports port size of 28-bit.

pub const fn port_size_29(&self) -> bool

Indicates whether the TPIU supports port size of 29-bit.

pub fn set_port_size_29(&mut self, val: bool)

Indicates whether the TPIU supports port size of 29-bit.

pub const fn port_size_30(&self) -> bool

Indicates whether the TPIU supports port size of 30-bit.

pub fn set_port_size_30(&mut self, val: bool)

Indicates whether the TPIU supports port size of 30-bit.

pub const fn port_size_31(&self) -> bool

Indicates whether the TPIU supports port size of 31-bit.

pub fn set_port_size_31(&mut self, val: bool)

Indicates whether the TPIU supports port size of 31-bit.

pub const fn port_size_32(&self) -> bool

Indicates whether the TPIU supports port size of 32-bit.

pub fn set_port_size_32(&mut self, val: bool)

Indicates whether the TPIU supports port size of 32-bit.

Trait Implementations

impl Clone for Supportedportsizes

fn clone(&self) -> Supportedportsizes

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Supportedportsizes

fn fmt(&self, f: &mut Formatter<'_>) -> Result<(), Error>

Formats the value using the given formatter.

impl Default for Supportedportsizes

fn default() -> Supportedportsizes

Returns the “default value” for a type.

impl PartialEq for Supportedportsizes

fn eq(&self, other: &Supportedportsizes) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Supportedportsizes

impl Eq for Supportedportsizes

impl StructuralPartialEq for Supportedportsizes