Embassy
embassy-nrf

Crates

git

Versions

nrf9160-s

Flavors

Struct embassy_nrf::twim::Twim

source ·
pub struct Twim<'d, T: Instance> { /* private fields */ }
Expand description

TWI driver.

Implementations§

source§

impl<'d, T: Instance> Twim<'d, T>

source

pub fn new( twim: impl Peripheral<P = T> + 'd, _irq: impl Binding<T::Interrupt, InterruptHandler<T>> + 'd, sda: impl Peripheral<P = impl GpioPin> + 'd, scl: impl Peripheral<P = impl GpioPin> + 'd, config: Config ) -> Self

Create a new TWI driver.

source

pub fn blocking_write( &mut self, address: u8, buffer: &[u8] ) -> Result<(), Error>

Write to an I2C slave.

The buffer must have a length of at most 255 bytes on the nRF52832 and at most 65535 bytes on the nRF52840.

source

pub fn blocking_write_from_ram( &mut self, address: u8, buffer: &[u8] ) -> Result<(), Error>

Same as blocking_write but will fail instead of copying data into RAM. Consult the module level documentation to learn more.

source

pub fn blocking_read( &mut self, address: u8, buffer: &mut [u8] ) -> Result<(), Error>

Read from an I2C slave.

The buffer must have a length of at most 255 bytes on the nRF52832 and at most 65535 bytes on the nRF52840.

source

pub fn blocking_write_read( &mut self, address: u8, wr_buffer: &[u8], rd_buffer: &mut [u8] ) -> Result<(), Error>

Write data to an I2C slave, then read data from the slave without triggering a stop condition between the two.

The buffers must have a length of at most 255 bytes on the nRF52832 and at most 65535 bytes on the nRF52840.

source

pub fn blocking_write_read_from_ram( &mut self, address: u8, wr_buffer: &[u8], rd_buffer: &mut [u8] ) -> Result<(), Error>

Same as blocking_write_read but will fail instead of copying data into RAM. Consult the module level documentation to learn more.

source

pub fn blocking_write_timeout( &mut self, address: u8, buffer: &[u8], timeout: Duration ) -> Result<(), Error>

Write to an I2C slave with timeout.

See [blocking_write].

source

pub fn blocking_write_from_ram_timeout( &mut self, address: u8, buffer: &[u8], timeout: Duration ) -> Result<(), Error>

Same as blocking_write but will fail instead of copying data into RAM. Consult the module level documentation to learn more.

source

pub fn blocking_read_timeout( &mut self, address: u8, buffer: &mut [u8], timeout: Duration ) -> Result<(), Error>

Read from an I2C slave.

The buffer must have a length of at most 255 bytes on the nRF52832 and at most 65535 bytes on the nRF52840.

source

pub fn blocking_write_read_timeout( &mut self, address: u8, wr_buffer: &[u8], rd_buffer: &mut [u8], timeout: Duration ) -> Result<(), Error>

Write data to an I2C slave, then read data from the slave without triggering a stop condition between the two.

The buffers must have a length of at most 255 bytes on the nRF52832 and at most 65535 bytes on the nRF52840.

source

pub fn blocking_write_read_from_ram_timeout( &mut self, address: u8, wr_buffer: &[u8], rd_buffer: &mut [u8], timeout: Duration ) -> Result<(), Error>

Same as blocking_write_read but will fail instead of copying data into RAM. Consult the module level documentation to learn more.

source

pub async fn read( &mut self, address: u8, buffer: &mut [u8] ) -> Result<(), Error>

Read from an I2C slave.

The buffer must have a length of at most 255 bytes on the nRF52832 and at most 65535 bytes on the nRF52840.

source

pub async fn write(&mut self, address: u8, buffer: &[u8]) -> Result<(), Error>

Write to an I2C slave.

The buffer must have a length of at most 255 bytes on the nRF52832 and at most 65535 bytes on the nRF52840.

source

pub async fn write_from_ram( &mut self, address: u8, buffer: &[u8] ) -> Result<(), Error>

Same as write but will fail instead of copying data into RAM. Consult the module level documentation to learn more.

source

pub async fn write_read( &mut self, address: u8, wr_buffer: &[u8], rd_buffer: &mut [u8] ) -> Result<(), Error>

Write data to an I2C slave, then read data from the slave without triggering a stop condition between the two.

The buffers must have a length of at most 255 bytes on the nRF52832 and at most 65535 bytes on the nRF52840.

source

pub async fn write_read_from_ram( &mut self, address: u8, wr_buffer: &[u8], rd_buffer: &mut [u8] ) -> Result<(), Error>

Same as write_read but will fail instead of copying data into RAM. Consult the module level documentation to learn more.

Trait Implementations§

source§

impl<'a, T: Instance> Drop for Twim<'a, T>

source§

fn drop(&mut self)

Executes the destructor for this type. Read more
source§

impl<'d, T: Instance> ErrorType for Twim<'d, T>

§

type Error = Error

Error type
source§

impl<'d, T: Instance> I2c for Twim<'d, T>

source§

fn read(&mut self, address: u8, buffer: &mut [u8]) -> Result<(), Self::Error>

Reads enough bytes from slave with address to fill read. Read more
source§

fn write(&mut self, address: u8, buffer: &[u8]) -> Result<(), Self::Error>

Writes bytes to slave with address address. Read more
source§

fn write_read( &mut self, address: u8, wr_buffer: &[u8], rd_buffer: &mut [u8] ) -> Result<(), Self::Error>

Writes bytes to slave with address address and then reads enough bytes to fill read in a single transaction. Read more
source§

fn transaction( &mut self, _address: u8, _operations: &mut [Operation<'_>] ) -> Result<(), Self::Error>

Execute the provided operations on the I2C bus. Read more
source§

impl<'d, T: Instance> I2c for Twim<'d, T>

source§

async fn read( &mut self, address: u8, read: &mut [u8] ) -> Result<(), Self::Error>

Reads enough bytes from slave with address to fill buffer. Read more
source§

async fn write(&mut self, address: u8, write: &[u8]) -> Result<(), Self::Error>

Writes bytes to slave with address address. Read more
source§

async fn write_read( &mut self, address: u8, write: &[u8], read: &mut [u8] ) -> Result<(), Self::Error>

Writes bytes to slave with address address and then reads enough bytes to fill read in a single transaction. Read more
source§

async fn transaction( &mut self, address: u8, operations: &mut [Operation<'_>] ) -> Result<(), Self::Error>

Execute the provided operations on the I2C bus as a single transaction. Read more
source§

impl<'d, T: Instance> SetConfig for Twim<'d, T>

§

type Config = Config

The configuration type used by this driver.
§

type ConfigError = ()

The error type that can occur if set_config fails.
source§

fn set_config(&mut self, config: &Self::Config) -> Result<(), Self::ConfigError>

Set the configuration of the driver.
source§

impl<'a, T: Instance> Read for Twim<'a, T>

§

type Error = Error

Error type
source§

fn read(&mut self, addr: u8, bytes: &mut [u8]) -> Result<(), Error>

Reads enough bytes from slave with address to fill buffer Read more
source§

impl<'a, T: Instance> Write for Twim<'a, T>

§

type Error = Error

Error type
source§

fn write(&mut self, addr: u8, bytes: &[u8]) -> Result<(), Error>

Writes bytes to slave with address address Read more
source§

impl<'a, T: Instance> WriteRead for Twim<'a, T>

§

type Error = Error

Error type
source§

fn write_read<'w>( &mut self, addr: u8, bytes: &'w [u8], buffer: &'w mut [u8] ) -> Result<(), Error>

Writes bytes to slave with address address and then reads enough bytes to fill buffer in a single transaction Read more

Auto Trait Implementations§

§

impl<'d, T> Freeze for Twim<'d, T>
where T: Freeze,

§

impl<'d, T> RefUnwindSafe for Twim<'d, T>
where T: RefUnwindSafe,

§

impl<'d, T> Send for Twim<'d, T>
where T: Send,

§

impl<'d, T> Sync for Twim<'d, T>
where T: Sync,

§

impl<'d, T> Unpin for Twim<'d, T>
where T: Unpin,

§

impl<'d, T> !UnwindSafe for Twim<'d, T>

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Az for T

source§

fn az<Dst>(self) -> Dst
where T: Cast<Dst>,

Casts the value.
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<Src, Dst> CastFrom<Src> for Dst
where Src: Cast<Dst>,

source§

fn cast_from(src: Src) -> Dst

Casts the value.
source§

impl<T> CheckedAs for T

source§

fn checked_as<Dst>(self) -> Option<Dst>
where T: CheckedCast<Dst>,

Casts the value.
source§

impl<Src, Dst> CheckedCastFrom<Src> for Dst
where Src: CheckedCast<Dst>,

source§

fn checked_cast_from(src: Src) -> Option<Dst>

Casts the value.
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<Src, Dst> LosslessTryInto<Dst> for Src
where Dst: LosslessTryFrom<Src>,

source§

fn lossless_try_into(self) -> Option<Dst>

Performs the conversion.
source§

impl<Src, Dst> LossyInto<Dst> for Src
where Dst: LossyFrom<Src>,

source§

fn lossy_into(self) -> Dst

Performs the conversion.
source§

impl<T> OverflowingAs for T

source§

fn overflowing_as<Dst>(self) -> (Dst, bool)
where T: OverflowingCast<Dst>,

Casts the value.
source§

impl<Src, Dst> OverflowingCastFrom<Src> for Dst
where Src: OverflowingCast<Dst>,

source§

fn overflowing_cast_from(src: Src) -> (Dst, bool)

Casts the value.
source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> SaturatingAs for T

source§

fn saturating_as<Dst>(self) -> Dst
where T: SaturatingCast<Dst>,

Casts the value.
source§

impl<Src, Dst> SaturatingCastFrom<Src> for Dst
where Src: SaturatingCast<Dst>,

source§

fn saturating_cast_from(src: Src) -> Dst

Casts the value.
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> UnwrappedAs for T

source§

fn unwrapped_as<Dst>(self) -> Dst
where T: UnwrappedCast<Dst>,

Casts the value.
source§

impl<Src, Dst> UnwrappedCastFrom<Src> for Dst
where Src: UnwrappedCast<Dst>,

source§

fn unwrapped_cast_from(src: Src) -> Dst

Casts the value.
source§

impl<T> WrappingAs for T

source§

fn wrapping_as<Dst>(self) -> Dst
where T: WrappingCast<Dst>,

Casts the value.
source§

impl<Src, Dst> WrappingCastFrom<Src> for Dst
where Src: WrappingCast<Dst>,

source§

fn wrapping_cast_from(src: Src) -> Dst

Casts the value.