Struct UART12

pub struct UART12 { /* private fields */ }

UART12 peripheral

Implementations

impl UART12

pub unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl Clone for UART12

fn clone(&self) -> Self

Returns a duplicate of the value.

const fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl CtsPin<UART12> for PB3

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CtsPin

impl CtsPin<UART12> for PE8

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CtsPin

impl DePin<UART12> for PC5

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DePin

impl DePin<UART12> for PE7

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DePin

impl Debug for UART12

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Format for UART12

where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl Instance for UART12

type Interrupt = UART12

Interrupt for this peripheral.

impl RtsPin<UART12> for PC5

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RtsPin

impl RtsPin<UART12> for PE7

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RtsPin

impl RxDma<UART12> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<UART12> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<UART12> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<UART12> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<UART12> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<UART12> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<UART12> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<UART12> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<UART12> for GPDMA2_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<UART12> for GPDMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<UART12> for GPDMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<UART12> for GPDMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<UART12> for GPDMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<UART12> for GPDMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<UART12> for GPDMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<UART12> for GPDMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxPin<UART12> for PE9

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RxPin

impl TxDma<UART12> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<UART12> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<UART12> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<UART12> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<UART12> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<UART12> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<UART12> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<UART12> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<UART12> for GPDMA2_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<UART12> for GPDMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<UART12> for GPDMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<UART12> for GPDMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<UART12> for GPDMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<UART12> for GPDMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<UART12> for GPDMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<UART12> for GPDMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxPin<UART12> for PE10

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin

impl Copy for UART12

impl PeripheralType for UART12

impl RccPeripheral for UART12