Struct CRYP

pub struct CRYP { /* private fields */ }

CRYP peripheral

Implementations

impl CRYP

pub unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl Clone for CRYP

fn clone(&self) -> Self

Returns a duplicate of the value.

const fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for CRYP

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl DmaIn<CRYP> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaIn Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaIn<CRYP> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaIn Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaIn<CRYP> for GPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaIn Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaIn<CRYP> for GPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaIn Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaIn<CRYP> for GPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaIn Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaIn<CRYP> for GPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaIn Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaIn<CRYP> for GPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaIn Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaIn<CRYP> for GPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaIn Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaIn<CRYP> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaIn Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaIn<CRYP> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaIn Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaIn<CRYP> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaIn Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaIn<CRYP> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaIn Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaIn<CRYP> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaIn Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaIn<CRYP> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaIn Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaIn<CRYP> for GPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaIn Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaIn<CRYP> for GPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaIn Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaOut<CRYP> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaOut Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaOut<CRYP> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaOut Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaOut<CRYP> for GPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaOut Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaOut<CRYP> for GPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaOut Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaOut<CRYP> for GPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaOut Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaOut<CRYP> for GPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaOut Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaOut<CRYP> for GPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaOut Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaOut<CRYP> for GPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaOut Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaOut<CRYP> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaOut Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaOut<CRYP> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaOut Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaOut<CRYP> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaOut Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaOut<CRYP> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaOut Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaOut<CRYP> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaOut Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaOut<CRYP> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaOut Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaOut<CRYP> for GPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaOut Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl DmaOut<CRYP> for GPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDmaOut Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Format for CRYP

where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl Instance for CRYP

type Interrupt = CRYP

Interrupt for this CRYP instance.

impl Copy for CRYP

impl PeripheralType for CRYP

impl RccPeripheral for CRYP