Struct HSPI1

pub struct HSPI1 { /* private fields */ }

HSPI1 peripheral

Implementations

impl HSPI1

pub unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl Clone for HSPI1

fn clone(&self) -> Self

Returns a duplicate of the value.

const fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl D0Pin<HSPI1> for PH10

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D0Pin

impl D10Pin<HSPI1> for PI11

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D10Pin

impl D11Pin<HSPI1> for PI12

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D11Pin

impl D12Pin<HSPI1> for PI13

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D12Pin

impl D13Pin<HSPI1> for PI14

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D13Pin

impl D14Pin<HSPI1> for PI15

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D14Pin

impl D15Pin<HSPI1> for PJ0

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D15Pin

impl D1Pin<HSPI1> for PH11

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D1Pin

impl D2Pin<HSPI1> for PH12

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D2Pin

impl D3Pin<HSPI1> for PH13

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D3Pin

impl D4Pin<HSPI1> for PH14

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D4Pin

impl D5Pin<HSPI1> for PH15

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D5Pin

impl D6Pin<HSPI1> for PI0

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D6Pin

impl D7Pin<HSPI1> for PI1

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D7Pin

impl D8Pin<HSPI1> for PI9

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D8Pin

impl D9Pin<HSPI1> for PI10

fn af_num(&self) -> u8

Get the AF number needed to use this pin as D9Pin

impl DQS0Pin<HSPI1> for PI2

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DQS0Pin

impl DQS1Pin<HSPI1> for PI8

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DQS1Pin

impl Debug for HSPI1

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Format for HSPI1

where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl HspiDma<HSPI1> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel asHspiDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl HspiDma<HSPI1> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asHspiDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl HspiDma<HSPI1> for GPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel asHspiDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl HspiDma<HSPI1> for GPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel asHspiDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl HspiDma<HSPI1> for GPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel asHspiDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl HspiDma<HSPI1> for GPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel asHspiDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl HspiDma<HSPI1> for GPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel asHspiDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl HspiDma<HSPI1> for GPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel asHspiDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl HspiDma<HSPI1> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asHspiDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl HspiDma<HSPI1> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asHspiDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl HspiDma<HSPI1> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asHspiDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl HspiDma<HSPI1> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asHspiDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl HspiDma<HSPI1> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asHspiDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl HspiDma<HSPI1> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asHspiDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl HspiDma<HSPI1> for GPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel asHspiDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl HspiDma<HSPI1> for GPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel asHspiDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl NSSPin<HSPI1> for PH9

fn af_num(&self) -> u8

Get the AF number needed to use this pin as NSSPin

impl NckPin<HSPI1> for PI4

fn af_num(&self) -> u8

Get the AF number needed to use this pin as NckPin

impl SckPin<HSPI1> for PI3

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SckPin

impl Copy for HSPI1

impl Instance for HSPI1

impl PeripheralType for HSPI1

impl RccPeripheral for HSPI1