Enum Ch4 

pub enum Ch4 {}

Channel 4 marker type.

Trait Implementations

impl Dma<TIM1, Ch4> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch4> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch4> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch4> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch4> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch4> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch4> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch4> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch4> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch4> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch4> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch4> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch4> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM1, Ch4> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch4> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch4> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch4> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch4> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch4> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch4> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch4> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch4> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch4> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch4> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch4> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch4> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch4> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM2, Ch4> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch4> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch4> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch4> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch4> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch4> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch4> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch4> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch4> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch4> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch4> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch4> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch4> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch4> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM3, Ch4> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch4> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch4> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch4> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch4> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch4> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch4> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch4> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch4> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch4> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch4> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch4> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch4> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch4> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM4, Ch4> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM5, Ch4> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM5, Ch4> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM5, Ch4> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM5, Ch4> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM5, Ch4> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM5, Ch4> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM5, Ch4> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM5, Ch4> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM5, Ch4> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM5, Ch4> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM5, Ch4> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM5, Ch4> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM5, Ch4> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM5, Ch4> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM8, Ch4> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM8, Ch4> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM8, Ch4> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM8, Ch4> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM8, Ch4> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM8, Ch4> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM8, Ch4> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM8, Ch4> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM8, Ch4> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM8, Ch4> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM8, Ch4> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM8, Ch4> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM8, Ch4> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<TIM8, Ch4> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TimerChannel for Ch4

const CHANNEL: Channel = Channel::Ch4

The runtime channel.

impl TimerPin<TIM1, Ch4> for PA11

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM2, Ch4> for PA3

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM2, Ch4> for PB11

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM3, Ch4> for PB1

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM3, Ch4> for PC9

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM4, Ch4> for PB9

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM5, Ch4> for PA3

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin

impl TimerPin<TIM8, Ch4> for PC9

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TimerPin