#[non_exhaustive]pub struct MidiClassConfig<'d> {
pub n_in_jacks: u8,
pub n_out_jacks: u8,
pub max_packet_size: u16,
pub interface_name: Option<&'d str>,
pub in_jack_names: &'d [Option<&'d str>],
pub out_jack_names: &'d [Option<&'d str>],
pub midi2: Option<Midi2Config<'d>>,
}Expand description
Configuration for the MIDI class.
For the jacks, the field names use the terminology used by the USB specification, which defines the direction from the perspective of the host.
This struct also implements the Default trait with the most common setup:
1 input jack, 1 output jack and a maximum packet size of 64.
Fields (Non-exhaustive)§
This struct is marked as non-exhaustive
Struct { .. } syntax; cannot be matched against without a wildcard ..; and struct update syntax will not work.n_in_jacks: u8Number of jacks for sending data to the host via the IN endpoint. If set to 0, the IN endpoint will not be allocated.
n_out_jacks: u8Number of jacks for receiving data from the host via the OUT endpoint. If set to 0, the OUT endpoint will not be allocated.
max_packet_size: u16Maximum packet size for the endpoints.
The same bulk endpoints are used by the MIDI 1.0 and MIDI 2.0 alternate
settings, so this single value applies to both.
At full speed, the value has to be one of 8, 16, 32 or 64. At high speed it has to be 512,
and at SuperSpeed 1024. MidiClass::new and MidiClass::new_with_names panic otherwise.
The default is 64, so a high-speed device has to set it.
interface_name: Option<&'d str>Name of the MIDIStreaming interface.
in_jack_names: &'d [Option<&'d str>]Name of each IN jack.
out_jack_names: &'d [Option<&'d str>]Name of each OUT jack.
midi2: Option<Midi2Config<'d>>Optional MIDI 2.0 configuration for Alternate Setting 1.
When set, Alternate Setting 1 reuses the bulk endpoints of Alternate Setting 0 instead of allocating a second pair.