Description cluster: Number of 32-bit words transferred in the last transaction
Description cluster: Maximum number of 32-bit words to transfer
IEEE 802.15.4 clear channel assessment control
Carrier freq. offset estimate
Clear the GPIO pattern array for antenna control
Description collection: AUXDATA configuration
CRC configuration
CRC initial value
CRC polynomial
CRC status
Selects the mode(s) that are activated on the start signal
Configuration for CTE inline mode
CTEInfo parsed from received packet
Number of bytes transferred in the current transaction
Device address match configuration
Device address match index
Description collection: Device address prefix n
Data whitening configuration
Correlator thresholds
Various configuration for Direction finding
Start offset for Direction finding
Whether to use Angle-of-Arrival (AOA) or Angle-of-Departure (AOD)
Number of bytes transferred in the last transaction
Maximum number of bytes to transfer
DFE status information
Turn on/off down sample of input IQ-signals
IEEE 802.15.4 energy detect control
IEEE 802.15.4 energy detect level
Description cluster: Enable or disable data acquisition
FAEPEER (Frequency Actuation Error) of peer if known. Used during Mode 0 steps.
Config register
FFO estimate
Fine tuning of the RF frequency
Frequency offset estimate
Frequency
Disable interrupt
Disable interrupt
Mean of IQ values
Mean magnitude and phase of the signal before it is converted to PCT16
Magnitude standard deviation approximation
The value of FREQUENCY that will be used in the next step
Number of input samples at 2MHz sample rate
Parameter used in TPM, provided by software
Packet configuration register 0
Packet configuration register 1
Mean magnitude and mean phase converted to IQ
Payload status
Parameter used in TPM, provided by software
Configurable delay of PHYEND event for TX
Prefixes bytes for logical addresses 0-3
Prefixes bytes for logical addresses 4-7
Data rate and modulation
RSSI sample
RTT Config.
Receive address select
CRC field of previously received packet
Override configuration of receiver gain control loop
Received address
IEEE 802.15.4 start of frame delimiter
Shortcuts between local events and tasks
Current radio state
GPIO patterns to be used for each antenna
Interframe spacing in us
Timing
Transmit address select
Output power