Struct rp_pac::usb::regs::Int

#[repr(transparent)]
pub struct Int(pub u32);

Interrupt Enable

Tuple Fields

0: u32

Implementations

impl Int

pub const fn host_conn_dis(&self) -> bool

Host: raised when a device is connected or disconnected (i.e. when SIE_STATUS.SPEED changes). Cleared by writing to SIE_STATUS.SPEED

pub fn set_host_conn_dis(&mut self, val: bool)

Host: raised when a device is connected or disconnected (i.e. when SIE_STATUS.SPEED changes). Cleared by writing to SIE_STATUS.SPEED

pub const fn host_resume(&self) -> bool

Host: raised when a device wakes up the host. Cleared by writing to SIE_STATUS.RESUME

pub fn set_host_resume(&mut self, val: bool)

Host: raised when a device wakes up the host. Cleared by writing to SIE_STATUS.RESUME

pub const fn host_sof(&self) -> bool

Host: raised every time the host sends a SOF (Start of Frame). Cleared by reading SOF_RD

pub fn set_host_sof(&mut self, val: bool)

Host: raised every time the host sends a SOF (Start of Frame). Cleared by reading SOF_RD

pub const fn trans_complete(&self) -> bool

Raised every time SIE_STATUS.TRANS_COMPLETE is set. Clear by writing to this bit.

pub fn set_trans_complete(&mut self, val: bool)

Raised every time SIE_STATUS.TRANS_COMPLETE is set. Clear by writing to this bit.

pub const fn buff_status(&self) -> bool

Raised when any bit in BUFF_STATUS is set. Clear by clearing all bits in BUFF_STATUS.

pub fn set_buff_status(&mut self, val: bool)

Raised when any bit in BUFF_STATUS is set. Clear by clearing all bits in BUFF_STATUS.

pub const fn error_data_seq(&self) -> bool

Source: SIE_STATUS.DATA_SEQ_ERROR

pub fn set_error_data_seq(&mut self, val: bool)

Source: SIE_STATUS.DATA_SEQ_ERROR

pub const fn error_rx_timeout(&self) -> bool

Source: SIE_STATUS.RX_TIMEOUT

pub fn set_error_rx_timeout(&mut self, val: bool)

Source: SIE_STATUS.RX_TIMEOUT

pub const fn error_rx_overflow(&self) -> bool

Source: SIE_STATUS.RX_OVERFLOW

pub fn set_error_rx_overflow(&mut self, val: bool)

Source: SIE_STATUS.RX_OVERFLOW

pub const fn error_bit_stuff(&self) -> bool

Source: SIE_STATUS.BIT_STUFF_ERROR

pub fn set_error_bit_stuff(&mut self, val: bool)

Source: SIE_STATUS.BIT_STUFF_ERROR

pub const fn error_crc(&self) -> bool

Source: SIE_STATUS.CRC_ERROR

pub fn set_error_crc(&mut self, val: bool)

Source: SIE_STATUS.CRC_ERROR

pub const fn stall(&self) -> bool

Source: SIE_STATUS.STALL_REC

pub fn set_stall(&mut self, val: bool)

Source: SIE_STATUS.STALL_REC

pub const fn vbus_detect(&self) -> bool

Source: SIE_STATUS.VBUS_DETECTED

pub fn set_vbus_detect(&mut self, val: bool)

Source: SIE_STATUS.VBUS_DETECTED

pub const fn bus_reset(&self) -> bool

Source: SIE_STATUS.BUS_RESET

pub fn set_bus_reset(&mut self, val: bool)

Source: SIE_STATUS.BUS_RESET

pub const fn dev_conn_dis(&self) -> bool

Set when the device connection state changes. Cleared by writing to SIE_STATUS.CONNECTED

pub fn set_dev_conn_dis(&mut self, val: bool)

Set when the device connection state changes. Cleared by writing to SIE_STATUS.CONNECTED

pub const fn dev_suspend(&self) -> bool

Set when the device suspend state changes. Cleared by writing to SIE_STATUS.SUSPENDED

pub fn set_dev_suspend(&mut self, val: bool)

Set when the device suspend state changes. Cleared by writing to SIE_STATUS.SUSPENDED

pub const fn dev_resume_from_host(&self) -> bool

Set when the device receives a resume from the host. Cleared by writing to SIE_STATUS.RESUME

pub fn set_dev_resume_from_host(&mut self, val: bool)

Set when the device receives a resume from the host. Cleared by writing to SIE_STATUS.RESUME

pub const fn setup_req(&self) -> bool

Device. Source: SIE_STATUS.SETUP_REC

pub fn set_setup_req(&mut self, val: bool)

Device. Source: SIE_STATUS.SETUP_REC

pub const fn dev_sof(&self) -> bool

Set every time the device receives a SOF (Start of Frame) packet. Cleared by reading SOF_RD

pub fn set_dev_sof(&mut self, val: bool)

Set every time the device receives a SOF (Start of Frame) packet. Cleared by reading SOF_RD

pub const fn abort_done(&self) -> bool

Raised when any bit in ABORT_DONE is set. Clear by clearing all bits in ABORT_DONE.

pub fn set_abort_done(&mut self, val: bool)

Raised when any bit in ABORT_DONE is set. Clear by clearing all bits in ABORT_DONE.

pub const fn ep_stall_nak(&self) -> bool

Raised when any bit in EP_STATUS_STALL_NAK is set. Clear by clearing all bits in EP_STATUS_STALL_NAK.

pub fn set_ep_stall_nak(&mut self, val: bool)

Raised when any bit in EP_STATUS_STALL_NAK is set. Clear by clearing all bits in EP_STATUS_STALL_NAK.

Trait Implementations

impl Clone for Int

fn clone(&self) -> Int

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Int

fn default() -> Int

Returns the “default value” for a type.

impl PartialEq<Int> for Int

fn eq(&self, other: &Int) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Int

impl Eq for Int

impl StructuralEq for Int

impl StructuralPartialEq for Int