stm32-metapac

Crates

11.0.0

Versions

stm32u535vc

Flavors

Struct Pll2divr

#[repr(transparent)]
pub struct Pll2divr(pub u32);
Expand description

RCC PLL2 dividers configuration register

Tuple Fields§

§0: u32

Implementations§

§

impl Pll2divr

pub const fn plln(&self) -> u16

Multiplication factor for PLL2 VCO Set and reset by software to control the multiplication factor of the VCO. These bits can be written only when the PLL is disabled (PLL2ON = 0 and PLL2RDY = 0). … … Others: reserved VCO output frequency = Fref2_ck x PLL2N, when fractional value 0 has been loaded into PLL2FRACN, with: PLL2N between 4 and 512 input frequency Fref2_ck between 1MHz and 16MHz

pub fn set_plln(&mut self, val: u16)

Multiplication factor for PLL2 VCO Set and reset by software to control the multiplication factor of the VCO. These bits can be written only when the PLL is disabled (PLL2ON = 0 and PLL2RDY = 0). … … Others: reserved VCO output frequency = Fref2_ck x PLL2N, when fractional value 0 has been loaded into PLL2FRACN, with: PLL2N between 4 and 512 input frequency Fref2_ck between 1MHz and 16MHz

pub const fn pllp(&self) -> u8

PLL2 DIVP division factor Set and reset by software to control the frequency of the pll2_p_ck clock. These bits can be written only when the PLL2 is disabled (PLL2ON = 0 and PLL2RDY = 0). …

pub fn set_pllp(&mut self, val: u8)

PLL2 DIVP division factor Set and reset by software to control the frequency of the pll2_p_ck clock. These bits can be written only when the PLL2 is disabled (PLL2ON = 0 and PLL2RDY = 0). …

pub const fn pllq(&self) -> u8

PLL2 DIVQ division factor Set and reset by software to control the frequency of the pll2_q_ck clock. These bits can be written only when the PLL2 is disabled (PLL2ON = 0 and PLL2RDY = 0). …

pub fn set_pllq(&mut self, val: u8)

PLL2 DIVQ division factor Set and reset by software to control the frequency of the pll2_q_ck clock. These bits can be written only when the PLL2 is disabled (PLL2ON = 0 and PLL2RDY = 0). …

pub const fn pllr(&self) -> u8

PLL2 DIVR division factor Set and reset by software to control the frequency of the pll2_r_ck clock. These bits can be written only when the PLL2 is disabled (PLL2ON = 0 and PLL2RDY = 0). …

pub fn set_pllr(&mut self, val: u8)

PLL2 DIVR division factor Set and reset by software to control the frequency of the pll2_r_ck clock. These bits can be written only when the PLL2 is disabled (PLL2ON = 0 and PLL2RDY = 0). …

Trait Implementations§

§

impl Clone for Pll2divr

§

fn clone(&self) -> Pll2divr

Returns a duplicate of the value. Read more
1.0.0 · Source§

const fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
§

impl Default for Pll2divr

§

fn default() -> Pll2divr

Returns the “default value” for a type. Read more
§

impl PartialEq for Pll2divr

§

fn eq(&self, other: &Pll2divr) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

const fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
§

impl Copy for Pll2divr

§

impl Eq for Pll2divr

§

impl StructuralPartialEq for Pll2divr

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.