Enum PgaGain

#[repr(u8)]
pub enum PgaGain {
    GAIN2 = 0,
    GAIN4 = 1,
    GAIN8 = 2,
    GAIN16 = 3,
    GAIN2_FILTERING_VINM0 = 4,
    GAIN4_FILTERING_VINM0 = 5,
    GAIN8_FILTERING_VINM0 = 6,
    GAIN16_FILTERING_VINM0 = 7,
    GAIN2INV_GAIN_NEG1_INPUT_VINM0 = 8,
    GAIN4INV_GAIN_NEG3_INPUT_VINM0 = 9,
    GAIN8INV_GAIN_NEG7_INPUT_VINM0 = 10,
    GAIN16INV_GAIN_NEG15_INPUT_VINM0 = 11,
    GAIN2INV_GAIN_NEG1_INPUT_VINM0FILTERING_VINM1 = 12,
    GAIN4INV_GAIN_NEG3_INPUT_VINM0FILTERING_VINM1 = 13,
    GAIN8INV_GAIN_NEG7_INPUT_VINM0FILTERING_VINM1 = 14,
    GAIN16INV_GAIN_NEG15_INPUT_VINM0FILTERING_VINM1 = 15,
}

Variants

GAIN2 = 0

Non-inverting internal Gain 2, VREF- referenced

GAIN4 = 1

Non-inverting internal Gain 4, VREF- referenced

GAIN8 = 2

Non-inverting internal Gain 8, VREF- referenced

GAIN16 = 3

Non-inverting internal Gain 16, VREF- referenced

GAIN2_FILTERING_VINM0 = 4

Non-inverting internal Gain 2 with filtering on INM0, VREF- referenced

GAIN4_FILTERING_VINM0 = 5

Non-inverting internal Gain 4 with filtering on INM0, VREF- referenced

GAIN8_FILTERING_VINM0 = 6

Non-inverting internal Gain 8 with filtering on INM0, VREF- referenced

GAIN16_FILTERING_VINM0 = 7

Non-inverting internal Gain 8 with filtering on INM0, VREF- referenced

GAIN2INV_GAIN_NEG1_INPUT_VINM0 = 8

Inverting gain=-1/ Non-inverting gain =2 with INM0 node for input or bias

GAIN4INV_GAIN_NEG3_INPUT_VINM0 = 9

Inverting gain=-3/ Non-inverting gain =4 with INM0 node for input or bias

GAIN8INV_GAIN_NEG7_INPUT_VINM0 = 10

Inverting gain=-7/ Non-inverting gain =8 with INM0 node for input or bias

GAIN16INV_GAIN_NEG15_INPUT_VINM0 = 11

Inverting gain=-15/ Non-inverting gain =16 with INM0 node for input or bias

GAIN2INV_GAIN_NEG1_INPUT_VINM0FILTERING_VINM1 = 12

Inverting gain=-1/ Non-inverting gain =2 with INM0 node for input or bias, INM1 node for filtering

GAIN4INV_GAIN_NEG3_INPUT_VINM0FILTERING_VINM1 = 13

Inverting gain=-3/ Non-inverting gain =4 with INM0 node for input or bias, INM1 node for filtering

GAIN8INV_GAIN_NEG7_INPUT_VINM0FILTERING_VINM1 = 14

Inverting gain=-7/ Non-inverting gain =8 with INM0 node for input or bias, INM1 node for filtering

GAIN16INV_GAIN_NEG15_INPUT_VINM0FILTERING_VINM1 = 15

Inverting gain=-15/ Non-inverting gain =16 with INM0 node for input or bias, INM1 node for filtering

Implementations

impl PgaGain

pub const fn from_bits(val: u8) -> PgaGain

pub const fn to_bits(self) -> u8

Trait Implementations

impl Clone for PgaGain

fn clone(&self) -> PgaGain

Returns a duplicate of the value.

const fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for PgaGain

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl From<PgaGain> for u8

fn from(val: PgaGain) -> u8

Converts to this type from the input type.

impl From<u8> for PgaGain

fn from(val: u8) -> PgaGain

Converts to this type from the input type.

impl Ord for PgaGain

fn cmp(&self, other: &PgaGain) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized,

Restrict a value to a certain interval.

impl PartialEq for PgaGain

fn eq(&self, other: &PgaGain) -> bool

Tests for self and other values to be equal, and is used by ==.

const fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for PgaGain

fn partial_cmp(&self, other: &PgaGain) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator.

impl Copy for PgaGain

impl Eq for PgaGain

impl StructuralPartialEq for PgaGain