Enum stm32_metapac::timer::vals::Sms

#[repr(u8)]
pub enum Sms {
    DISABLED = 0,
    ENCODER_MODE_1 = 1,
    ENCODER_MODE_2 = 2,
    ENCODER_MODE_3 = 3,
    RESET_MODE = 4,
    GATED_MODE = 5,
    TRIGGER_MODE = 6,
    EXT_CLOCK_MODE = 7,
    COMBINED_RESET_TRIGGER = 8,
    _RESERVED_9 = 9,
    _RESERVED_a = 10,
    _RESERVED_b = 11,
    _RESERVED_c = 12,
    _RESERVED_d = 13,
    _RESERVED_e = 14,
    _RESERVED_f = 15,
}

Variants

DISABLED = 0

Slave mode disabled - if CEN = ‘1’ then the prescaler is clocked directly by the internal clock.

ENCODER_MODE_1 = 1

Encoder mode 1 - Counter counts up/down on TI2FP1 edge depending on TI1FP2 level.

ENCODER_MODE_2 = 2

Encoder mode 2 - Counter counts up/down on TI1FP2 edge depending on TI2FP1 level.

ENCODER_MODE_3 = 3

Encoder mode 3 - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input.

RESET_MODE = 4

Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter and generates an update of the registers.

GATED_MODE = 5

Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled.

TRIGGER_MODE = 6

Trigger Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled.

EXT_CLOCK_MODE = 7

External Clock Mode 1 - Rising edges of the selected trigger (TRGI) clock the counter.

COMBINED_RESET_TRIGGER = 8

Rising edge of the selected trigger input (tim_trgi) reinitializes the counter, generates an update of the registers and starts the counter.

_RESERVED_9 = 9

_RESERVED_a = 10

_RESERVED_b = 11

_RESERVED_c = 12

_RESERVED_d = 13

_RESERVED_e = 14

_RESERVED_f = 15

Implementations

impl Sms

pub const fn from_bits(val: u8) -> Sms

pub const fn to_bits(self) -> u8

Trait Implementations

impl Clone for Sms

fn clone(&self) -> Sms

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl From<Sms> for u8

fn from(val: Sms) -> u8

Converts to this type from the input type.

impl From<u8> for Sms

fn from(val: u8) -> Sms

Converts to this type from the input type.

impl Ord for Sms

fn cmp(&self, other: &Sms) -> Ordering

This method returns an Ordering between self and other.

fn max(self, other: Self) -> Self

where Self: Sized,

Compares and returns the maximum of two values.

fn min(self, other: Self) -> Self

where Self: Sized,

Compares and returns the minimum of two values.

fn clamp(self, min: Self, max: Self) -> Self

where Self: Sized + PartialOrd,

Restrict a value to a certain interval.

impl PartialEq for Sms

fn eq(&self, other: &Sms) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl PartialOrd for Sms

fn partial_cmp(&self, other: &Sms) -> Option<Ordering>

This method returns an ordering between self and other values if one exists.

fn lt(&self, other: &Rhs) -> bool

This method tests less than (for self and other) and is used by the < operator.

fn le(&self, other: &Rhs) -> bool

This method tests less than or equal to (for self and other) and is used by the <= operator.

fn gt(&self, other: &Rhs) -> bool

This method tests greater than (for self and other) and is used by the > operator.

fn ge(&self, other: &Rhs) -> bool

This method tests greater than or equal to (for self and other) and is used by the >= operator.

impl Copy for Sms

impl Eq for Sms

impl StructuralEq for Sms

impl StructuralPartialEq for Sms