Struct stm32_metapac::flash::regs::Optsr

#[repr(transparent)]
pub struct Optsr(pub u32);

FLASH option status register

Tuple Fields

0: u32

Implementations

impl Optsr

pub const fn bor_lev(&self) -> OptsrBorLev

Brownout level option status bit These bits reflects the power level that generates a system reset.

pub fn set_bor_lev(&mut self, val: OptsrBorLev)

Brownout level option status bit These bits reflects the power level that generates a system reset.

pub const fn borh_en(&self) -> bool

Brownout high enable status bit

pub fn set_borh_en(&mut self, val: bool)

Brownout high enable status bit

pub const fn iwdg_sw(&self) -> OptsrIwdgSw

IWDG control mode option status bit

pub fn set_iwdg_sw(&mut self, val: OptsrIwdgSw)

IWDG control mode option status bit

pub const fn wwdg_sw(&self) -> OptsrWwdgSw

WWDG control mode option status bit

pub fn set_wwdg_sw(&mut self, val: OptsrWwdgSw)

WWDG control mode option status bit

pub const fn nrst_shdw(&self) -> OptsrNrstShdw

Core domain Shutdown entry reset option status bit

pub fn set_nrst_shdw(&mut self, val: OptsrNrstShdw)

Core domain Shutdown entry reset option status bit

pub const fn nrst_stop(&self) -> OptsrNrstStop

Core domain Stop entry reset option status bit

pub fn set_nrst_stop(&mut self, val: OptsrNrstStop)

Core domain Stop entry reset option status bit

pub const fn nrst_stdby(&self) -> OptsrNrstStdby

Core domain Standby entry reset option status bit

pub fn set_nrst_stdby(&mut self, val: OptsrNrstStdby)

Core domain Standby entry reset option status bit

pub const fn product_state(&self) -> ProductState

Life state code (based on Hamming 8,4).

pub fn set_product_state(&mut self, val: ProductState)

Life state code (based on Hamming 8,4).

pub const fn io_vdd_hslv(&self) -> OptsrIoVddHslv

High-speed IO at low VDD voltage status bit. This bit can be set only with VDD below 2.5 V.

pub fn set_io_vdd_hslv(&mut self, val: OptsrIoVddHslv)

High-speed IO at low VDD voltage status bit. This bit can be set only with VDD below 2.5 V.

pub const fn io_vddio2_hslv(&self) -> OptsrIoVddioHslv

High-speed IO at low VDDIO2 voltage status bit. This bit can be set only with VDDIO2 below 2.5 V.

pub fn set_io_vddio2_hslv(&mut self, val: OptsrIoVddioHslv)

High-speed IO at low VDDIO2 voltage status bit. This bit can be set only with VDDIO2 below 2.5 V.

pub const fn iwdg_stop(&self) -> OptsrIwdgStop

IWDG Stop mode freeze option status bit When set the independent watchdog IWDG is in system Stop mode.

pub fn set_iwdg_stop(&mut self, val: OptsrIwdgStop)

IWDG Stop mode freeze option status bit When set the independent watchdog IWDG is in system Stop mode.

pub const fn iwdg_stdby(&self) -> OptsrIwdgStdby

IWDG Standby mode freeze option status bit When set the independent watchdog IWDG is frozen in system Standby mode.

pub fn set_iwdg_stdby(&mut self, val: OptsrIwdgStdby)

IWDG Standby mode freeze option status bit When set the independent watchdog IWDG is frozen in system Standby mode.

pub const fn swap_bank(&self) -> bool

Bank swapping option status bit SWAP_BANK reflects whether Bank1 and Bank2 are swapped or not. SWAP_BANK is loaded to SWAP_BANK of FLASH_OPTCR after a reset.

pub fn set_swap_bank(&mut self, val: bool)

Bank swapping option status bit SWAP_BANK reflects whether Bank1 and Bank2 are swapped or not. SWAP_BANK is loaded to SWAP_BANK of FLASH_OPTCR after a reset.

Trait Implementations

impl Clone for Optsr

fn clone(&self) -> Optsr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Optsr

fn default() -> Optsr

Returns the “default value” for a type.

impl PartialEq for Optsr

fn eq(&self, other: &Optsr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Optsr

impl Eq for Optsr

impl StructuralPartialEq for Optsr