stm32-metapac

Crates

git

Versions

stm32h523zc

Flavors

Struct stm32_metapac::gpdma::regs::ChTr3

#[repr(transparent)]
pub struct ChTr3(pub u32);
Expand description

GPDMA channel 14 transfer register 3

Tuple Fields§

§0: u32

Implementations§

§

impl ChTr3

pub const fn sao(&self) -> u16

source address offset increment. The source address, pointed by CH[x].SAR, is incremented or decremented (depending on CH[x].BR1.SDEC) by this offset SAO[12:0] for each programmed source burst. This offset is not including and is added to the programmed burst size when the completed burst is addressed in incremented mode (CH[x].TR1.SINC = 1). Note: A source address offset must be aligned with the programmed data width of a source burst (SAO[2:0] versus CH[x].TR1.SDW_LOG2[1:0]). Else a user setting error is reported and none transfer is issued. When the source block size is not a multiple of the destination burst size and is a multiple of the source data width, then the last programmed source burst is not completed and is internally shorten to match the block size. In this case, the additional CH[x].TR3.SAO[12:0] is not applied.

pub fn set_sao(&mut self, val: u16)

source address offset increment. The source address, pointed by CH[x].SAR, is incremented or decremented (depending on CH[x].BR1.SDEC) by this offset SAO[12:0] for each programmed source burst. This offset is not including and is added to the programmed burst size when the completed burst is addressed in incremented mode (CH[x].TR1.SINC = 1). Note: A source address offset must be aligned with the programmed data width of a source burst (SAO[2:0] versus CH[x].TR1.SDW_LOG2[1:0]). Else a user setting error is reported and none transfer is issued. When the source block size is not a multiple of the destination burst size and is a multiple of the source data width, then the last programmed source burst is not completed and is internally shorten to match the block size. In this case, the additional CH[x].TR3.SAO[12:0] is not applied.

pub const fn dao(&self) -> u16

destination address offset increment. The destination address, pointed by CH[x].DAR, is incremented or decremented (depending on CH[x].BR1.DDEC) by this offset DAO[12:0] for each programmed destination burst. This offset is not including and is added to the programmed burst size when the completed burst is addressed in incremented mode (CH[x].TR1.DINC = 1). Note: A destination address offset must be aligned with the programmed data width of a destination burst (DAO[2:0] versus CH[x].TR1.DDW[1:0]). Else, a user setting error is reported and no transfer is issued.

pub fn set_dao(&mut self, val: u16)

destination address offset increment. The destination address, pointed by CH[x].DAR, is incremented or decremented (depending on CH[x].BR1.DDEC) by this offset DAO[12:0] for each programmed destination burst. This offset is not including and is added to the programmed burst size when the completed burst is addressed in incremented mode (CH[x].TR1.DINC = 1). Note: A destination address offset must be aligned with the programmed data width of a destination burst (DAO[2:0] versus CH[x].TR1.DDW[1:0]). Else, a user setting error is reported and no transfer is issued.

Trait Implementations§

§

impl Clone for ChTr3

§

fn clone(&self) -> ChTr3

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
§

impl Default for ChTr3

§

fn default() -> ChTr3

Returns the “default value” for a type. Read more
§

impl PartialEq for ChTr3

§

fn eq(&self, other: &ChTr3) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
§

impl Copy for ChTr3

§

impl Eq for ChTr3

§

impl StructuralPartialEq for ChTr3

Auto Trait Implementations§

§

impl Freeze for ChTr3

§

impl RefUnwindSafe for ChTr3

§

impl Send for ChTr3

§

impl Sync for ChTr3

§

impl Unpin for ChTr3

§

impl UnwindSafe for ChTr3

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

source§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.