stm32-metapac

Crates

git

Versions

stm32h563ri

Flavors

Struct stm32_metapac::ucpd::regs::Cfgr1

#[repr(transparent)]
pub struct Cfgr1(pub u32);
Expand description

configuration register 1

Tuple Fields§

§0: u32

Implementations§

§

impl Cfgr1

pub const fn hbitclkdiv(&self) -> u8

Division ratio for producing half-bit clock The bitfield determines the division ratio (the bitfield value plus one) of a clk divider producing half-bit clock (hbit_clk).

pub fn set_hbitclkdiv(&mut self, val: u8)

Division ratio for producing half-bit clock The bitfield determines the division ratio (the bitfield value plus one) of a clk divider producing half-bit clock (hbit_clk).

pub const fn ifrgap(&self) -> u8

Division ratio for producing inter-frame gap timer clock The bitfield determines the division ratio (the bitfield value minus one) of a clk divider producing inter-frame gap timer clock (tInterFrameGap). The division ratio 15 is to apply for Tx clock at the USB PD 2.0 specification nominal value. The division ratios below 15 are to apply for Tx clock below nominal, and the division ratios above 15 for Tx clock above nominal.

pub fn set_ifrgap(&mut self, val: u8)

Division ratio for producing inter-frame gap timer clock The bitfield determines the division ratio (the bitfield value minus one) of a clk divider producing inter-frame gap timer clock (tInterFrameGap). The division ratio 15 is to apply for Tx clock at the USB PD 2.0 specification nominal value. The division ratios below 15 are to apply for Tx clock below nominal, and the division ratios above 15 for Tx clock above nominal.

pub const fn transwin(&self) -> u8

Transition window duration The bitfield determines the division ratio (the bitfield value minus one) of a hbit_clk divider producing tTransitionWindow interval. Set a value that produces an interval of 12 to 20 us, taking into account the clk frequency and the HBITCLKDIV[5:0] bitfield setting.

pub fn set_transwin(&mut self, val: u8)

Transition window duration The bitfield determines the division ratio (the bitfield value minus one) of a hbit_clk divider producing tTransitionWindow interval. Set a value that produces an interval of 12 to 20 us, taking into account the clk frequency and the HBITCLKDIV[5:0] bitfield setting.

pub const fn psc_usbpdclk(&self) -> PscUsbpdclk

Pre-scaler division ratio for generating clk The bitfield determines the division ratio of a kernel clock pre-scaler producing peripheral clock (clk). It is recommended to use the pre-scaler so as to set the clk frequency in the range from 6 to 9 MHz.

pub fn set_psc_usbpdclk(&mut self, val: PscUsbpdclk)

Pre-scaler division ratio for generating clk The bitfield determines the division ratio of a kernel clock pre-scaler producing peripheral clock (clk). It is recommended to use the pre-scaler so as to set the clk frequency in the range from 6 to 9 MHz.

pub const fn rxordseten(&self) -> u16

Receiver ordered set enable The bitfield determines the types of ordered sets that the receiver must detect. When set/cleared, each bit enables/disables a specific function: 0bxxxxxxxx1: SOP detect enabled 0bxxxxxxx1x: SOP’ detect enabled 0bxxxxxx1xx: SOP’’ detect enabled 0bxxxxx1xxx: Hard Reset detect enabled 0bxxxx1xxxx: Cable Detect reset enabled 0bxxx1xxxxx: SOP’_Debug enabled 0bxx1xxxxxx: SOP’’_Debug enabled 0bx1xxxxxxx: SOP extension#1 enabled 0b1xxxxxxxx: SOP extension#2 enabled

pub fn set_rxordseten(&mut self, val: u16)

Receiver ordered set enable The bitfield determines the types of ordered sets that the receiver must detect. When set/cleared, each bit enables/disables a specific function: 0bxxxxxxxx1: SOP detect enabled 0bxxxxxxx1x: SOP’ detect enabled 0bxxxxxx1xx: SOP’’ detect enabled 0bxxxxx1xxx: Hard Reset detect enabled 0bxxxx1xxxx: Cable Detect reset enabled 0bxxx1xxxxx: SOP’_Debug enabled 0bxx1xxxxxx: SOP’’_Debug enabled 0bx1xxxxxxx: SOP extension#1 enabled 0b1xxxxxxxx: SOP extension#2 enabled

pub const fn txdmaen(&self) -> bool

Transmission DMA mode enable When set, the bit enables DMA mode for transmission.

pub fn set_txdmaen(&mut self, val: bool)

Transmission DMA mode enable When set, the bit enables DMA mode for transmission.

pub const fn rxdmaen(&self) -> bool

Reception DMA mode enable When set, the bit enables DMA mode for reception.

pub fn set_rxdmaen(&mut self, val: bool)

Reception DMA mode enable When set, the bit enables DMA mode for reception.

pub const fn ucpden(&self) -> bool

peripheral enable General enable of the peripheral. Upon disabling, the peripheral instantly quits any ongoing activity and all control bits and bitfields default to their reset values. They must be set to their desired values each time the peripheral transits from disabled to enabled state.

pub fn set_ucpden(&mut self, val: bool)

peripheral enable General enable of the peripheral. Upon disabling, the peripheral instantly quits any ongoing activity and all control bits and bitfields default to their reset values. They must be set to their desired values each time the peripheral transits from disabled to enabled state.

Trait Implementations§

§

impl Clone for Cfgr1

§

fn clone(&self) -> Cfgr1

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
§

impl Default for Cfgr1

§

fn default() -> Cfgr1

Returns the “default value” for a type. Read more
§

impl PartialEq for Cfgr1

§

fn eq(&self, other: &Cfgr1) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
§

impl Copy for Cfgr1

§

impl Eq for Cfgr1

§

impl StructuralPartialEq for Cfgr1

Auto Trait Implementations§

§

impl Freeze for Cfgr1

§

impl RefUnwindSafe for Cfgr1

§

impl Send for Cfgr1

§

impl Sync for Cfgr1

§

impl Unpin for Cfgr1

§

impl UnwindSafe for Cfgr1

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

source§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.