Struct stm32_metapac::adc::regs::Cfgr
#[repr(transparent)]pub struct Cfgr(pub u32);Expand description
configuration register
Tuple Fields§
§0: u32Implementations§
§impl Cfgr
impl Cfgr
pub const fn dmaen(&self) -> bool
pub const fn dmaen(&self) -> bool
Direct memory access enable This bit is set and cleared by software to enable the generation of DMA requests. This allows to use the DMA to manage automatically the converted data. For more details, refer to conversions using the DMA. Note: The software is allowed to write this bit only when ADSTART = 0 and JADSTART = 0 (which ensures that no conversion is ongoing).
pub fn set_dmaen(&mut self, val: bool)
pub fn set_dmaen(&mut self, val: bool)
Direct memory access enable This bit is set and cleared by software to enable the generation of DMA requests. This allows to use the DMA to manage automatically the converted data. For more details, refer to conversions using the DMA. Note: The software is allowed to write this bit only when ADSTART = 0 and JADSTART = 0 (which ensures that no conversion is ongoing).
pub const fn dmacfg(&self) -> Dmacfg
pub const fn dmacfg(&self) -> Dmacfg
Direct memory access configuration This bit is set and cleared by software to select between two DMA modes of operation and is effective only when DMAEN = 1. For more details, refer to Note: The software is allowed to write this bit only when ADSTART = 0 and JADSTART = 0 (which ensures that no conversion is ongoing).
pub fn set_dmacfg(&mut self, val: Dmacfg)
pub fn set_dmacfg(&mut self, val: Dmacfg)
Direct memory access configuration This bit is set and cleared by software to select between two DMA modes of operation and is effective only when DMAEN = 1. For more details, refer to Note: The software is allowed to write this bit only when ADSTART = 0 and JADSTART = 0 (which ensures that no conversion is ongoing).
pub const fn res(&self) -> Res
pub const fn res(&self) -> Res
Data resolution These bits are written by software to select the resolution of the conversion. Note: The software is allowed to write these bits only when ADSTART = 0 and JADSTART = 0 (which ensures that no conversion is ongoing).
pub fn set_res(&mut self, val: Res)
pub fn set_res(&mut self, val: Res)
Data resolution These bits are written by software to select the resolution of the conversion. Note: The software is allowed to write these bits only when ADSTART = 0 and JADSTART = 0 (which ensures that no conversion is ongoing).
pub const fn extsel(&self, n: usize) -> bool
pub const fn extsel(&self, n: usize) -> bool
External trigger selection for regular group These bits select the external event used to trigger the start of conversion of a regular group: … Note: The software is allowed to write these bits only when ADSTART = 0 (which ensures that no regular conversion is ongoing).
pub fn set_extsel(&mut self, n: usize, val: bool)
pub fn set_extsel(&mut self, n: usize, val: bool)
External trigger selection for regular group These bits select the external event used to trigger the start of conversion of a regular group: … Note: The software is allowed to write these bits only when ADSTART = 0 (which ensures that no regular conversion is ongoing).
pub const fn exten(&self) -> Exten
pub const fn exten(&self) -> Exten
External trigger enable and polarity selection for regular channels These bits are set and cleared by software to select the external trigger polarity and enable the trigger of a regular group. Note: The software is allowed to write these bits only when ADSTART = 0 (which ensures that no regular conversion is ongoing).
pub fn set_exten(&mut self, val: Exten)
pub fn set_exten(&mut self, val: Exten)
External trigger enable and polarity selection for regular channels These bits are set and cleared by software to select the external trigger polarity and enable the trigger of a regular group. Note: The software is allowed to write these bits only when ADSTART = 0 (which ensures that no regular conversion is ongoing).
pub const fn ovrmod(&self) -> Ovrmod
pub const fn ovrmod(&self) -> Ovrmod
Overrun mode This bit is set and cleared by software and configure the way data overrun is managed. Note: The software is allowed to write this bit only when ADSTART = 0 (which ensures that no regular conversion is ongoing).
pub fn set_ovrmod(&mut self, val: Ovrmod)
pub fn set_ovrmod(&mut self, val: Ovrmod)
Overrun mode This bit is set and cleared by software and configure the way data overrun is managed. Note: The software is allowed to write this bit only when ADSTART = 0 (which ensures that no regular conversion is ongoing).
pub const fn cont(&self) -> Cont
pub const fn cont(&self) -> Cont
Single / Continuous conversion mode for regular conversions This bit is set and cleared by software. If it is set, regular conversion takes place continuously until it is cleared. Note: It is not possible to have both Discontinuous mode and Continuous mode enabled: it is forbidden to set both DISCEN = 1 and CONT = 1. The software is allowed to write this bit only when ADSTART = 0 (which ensures that no regular conversion is ongoing).
pub fn set_cont(&mut self, val: Cont)
pub fn set_cont(&mut self, val: Cont)
Single / Continuous conversion mode for regular conversions This bit is set and cleared by software. If it is set, regular conversion takes place continuously until it is cleared. Note: It is not possible to have both Discontinuous mode and Continuous mode enabled: it is forbidden to set both DISCEN = 1 and CONT = 1. The software is allowed to write this bit only when ADSTART = 0 (which ensures that no regular conversion is ongoing).
pub const fn autdly(&self) -> bool
pub const fn autdly(&self) -> bool
Delayed conversion mode This bit is set and cleared by software to enable/disable the Auto Delayed Conversion mode.. Note: The software is allowed to write this bit only when ADSTART = 0 and JADSTART = 0 (which ensures that no conversion is ongoing).
pub fn set_autdly(&mut self, val: bool)
pub fn set_autdly(&mut self, val: bool)
Delayed conversion mode This bit is set and cleared by software to enable/disable the Auto Delayed Conversion mode.. Note: The software is allowed to write this bit only when ADSTART = 0 and JADSTART = 0 (which ensures that no conversion is ongoing).
pub const fn align(&self) -> Align
pub const fn align(&self) -> Align
Data alignment This bit is set and cleared by software to select right or left alignment. Refer to register, data alignment and offset (ADC_DR, OFFSET, OFFSET_CH, ALIGN). Note: The software is allowed to write this bit only when ADSTART = 0 and JADSTART = 0 (which ensures that no conversion is ongoing).
pub fn set_align(&mut self, val: Align)
pub fn set_align(&mut self, val: Align)
Data alignment This bit is set and cleared by software to select right or left alignment. Refer to register, data alignment and offset (ADC_DR, OFFSET, OFFSET_CH, ALIGN). Note: The software is allowed to write this bit only when ADSTART = 0 and JADSTART = 0 (which ensures that no conversion is ongoing).
pub const fn discen(&self) -> bool
pub const fn discen(&self) -> bool
Discontinuous mode for regular channels This bit is set and cleared by software to enable/disable Discontinuous mode for regular channels. Note: It is not possible to have both Discontinuous mode and Continuous mode enabled: it is forbidden to set both DISCEN = 1 and CONT = 1. It is not possible to use both auto-injected mode and Discontinuous mode simultaneously: the bits DISCEN and JDISCEN must be kept cleared by software when JAUTO is set. The software is allowed to write this bit only when ADSTART = 0 (which ensures that no regular conversion is ongoing).
pub fn set_discen(&mut self, val: bool)
pub fn set_discen(&mut self, val: bool)
Discontinuous mode for regular channels This bit is set and cleared by software to enable/disable Discontinuous mode for regular channels. Note: It is not possible to have both Discontinuous mode and Continuous mode enabled: it is forbidden to set both DISCEN = 1 and CONT = 1. It is not possible to use both auto-injected mode and Discontinuous mode simultaneously: the bits DISCEN and JDISCEN must be kept cleared by software when JAUTO is set. The software is allowed to write this bit only when ADSTART = 0 (which ensures that no regular conversion is ongoing).
pub const fn discnum(&self) -> u8
pub const fn discnum(&self) -> u8
Discontinuous mode channel count These bits are written by software to define the number of regular channels to be converted in Discontinuous mode, after receiving an external trigger. … Note: The software is allowed to write these bits only when ADSTART = 0 (which ensures that no regular conversion is ongoing).
pub fn set_discnum(&mut self, val: u8)
pub fn set_discnum(&mut self, val: u8)
Discontinuous mode channel count These bits are written by software to define the number of regular channels to be converted in Discontinuous mode, after receiving an external trigger. … Note: The software is allowed to write these bits only when ADSTART = 0 (which ensures that no regular conversion is ongoing).
pub const fn jdiscen(&self) -> bool
pub const fn jdiscen(&self) -> bool
Discontinuous mode on injected channels This bit is set and cleared by software to enable/disable Discontinuous mode on the injected channels of a group. Note: The software is allowed to write this bit only when JADSTART = 0 (which ensures that no injected conversion is ongoing). It is not possible to use both auto-injected mode and Discontinuous mode simultaneously: the bits DISCEN and JDISCEN must be kept cleared by software when JAUTO is set.
pub fn set_jdiscen(&mut self, val: bool)
pub fn set_jdiscen(&mut self, val: bool)
Discontinuous mode on injected channels This bit is set and cleared by software to enable/disable Discontinuous mode on the injected channels of a group. Note: The software is allowed to write this bit only when JADSTART = 0 (which ensures that no injected conversion is ongoing). It is not possible to use both auto-injected mode and Discontinuous mode simultaneously: the bits DISCEN and JDISCEN must be kept cleared by software when JAUTO is set.
pub const fn jqm(&self) -> Jqm
pub const fn jqm(&self) -> Jqm
JSQR queue mode This bit is set and cleared by software. It defines how an empty Queue is managed. Refer to for more information. Note: The software is allowed to write this bit only when JADSTART = 0 (which ensures that no injected conversion is ongoing).
pub fn set_jqm(&mut self, val: Jqm)
pub fn set_jqm(&mut self, val: Jqm)
JSQR queue mode This bit is set and cleared by software. It defines how an empty Queue is managed. Refer to for more information. Note: The software is allowed to write this bit only when JADSTART = 0 (which ensures that no injected conversion is ongoing).
pub const fn awd1sgl(&self) -> Awd1sgl
pub const fn awd1sgl(&self) -> Awd1sgl
Enable the watchdog 1 on a single channel or on all channels This bit is set and cleared by software to enable the analog watchdog on the channel identified by the AWD1CH[4:0] bits or on all the channels Note: The software is allowed to write these bits only when ADSTART = 0 and JADSTART = 0 (which ensures that no conversion is ongoing).
pub fn set_awd1sgl(&mut self, val: Awd1sgl)
pub fn set_awd1sgl(&mut self, val: Awd1sgl)
Enable the watchdog 1 on a single channel or on all channels This bit is set and cleared by software to enable the analog watchdog on the channel identified by the AWD1CH[4:0] bits or on all the channels Note: The software is allowed to write these bits only when ADSTART = 0 and JADSTART = 0 (which ensures that no conversion is ongoing).
pub const fn awd1en(&self) -> bool
pub const fn awd1en(&self) -> bool
Analog watchdog 1 enable on regular channels This bit is set and cleared by software Note: The software is allowed to write this bit only when ADSTART = 0 (which ensures that no regular conversion is ongoing).
pub fn set_awd1en(&mut self, val: bool)
pub fn set_awd1en(&mut self, val: bool)
Analog watchdog 1 enable on regular channels This bit is set and cleared by software Note: The software is allowed to write this bit only when ADSTART = 0 (which ensures that no regular conversion is ongoing).
pub const fn jawd1en(&self) -> bool
pub const fn jawd1en(&self) -> bool
Analog watchdog 1 enable on injected channels This bit is set and cleared by software Note: The software is allowed to write this bit only when JADSTART = 0 (which ensures that no injected conversion is ongoing).
pub fn set_jawd1en(&mut self, val: bool)
pub fn set_jawd1en(&mut self, val: bool)
Analog watchdog 1 enable on injected channels This bit is set and cleared by software Note: The software is allowed to write this bit only when JADSTART = 0 (which ensures that no injected conversion is ongoing).
pub const fn jauto(&self) -> bool
pub const fn jauto(&self) -> bool
Automatic injected group conversion This bit is set and cleared by software to enable/disable automatic injected group conversion after regular group conversion. Note: The software is allowed to write this bit only when ADSTART = 0 and JADSTART = 0 (which ensures that no regular nor injected conversion is ongoing).
pub fn set_jauto(&mut self, val: bool)
pub fn set_jauto(&mut self, val: bool)
Automatic injected group conversion This bit is set and cleared by software to enable/disable automatic injected group conversion after regular group conversion. Note: The software is allowed to write this bit only when ADSTART = 0 and JADSTART = 0 (which ensures that no regular nor injected conversion is ongoing).
pub const fn awd1ch(&self) -> u8
pub const fn awd1ch(&self) -> u8
Analog watchdog 1 channel selection These bits are set and cleared by software. They select the input channel to be guarded by the analog watchdog. ….. others: reserved, must not be used Note: Some channels are not connected physically. Keep the corresponding AWD1CH[4:0] setting to the reset value. The channel selected by AWD1CH must be also selected into the SQRi or JSQRi registers. The software is allowed to write these bits only when ADSTART = 0 and JADSTART = 0 (which ensures that no conversion is ongoing).
pub fn set_awd1ch(&mut self, val: u8)
pub fn set_awd1ch(&mut self, val: u8)
Analog watchdog 1 channel selection These bits are set and cleared by software. They select the input channel to be guarded by the analog watchdog. ….. others: reserved, must not be used Note: Some channels are not connected physically. Keep the corresponding AWD1CH[4:0] setting to the reset value. The channel selected by AWD1CH must be also selected into the SQRi or JSQRi registers. The software is allowed to write these bits only when ADSTART = 0 and JADSTART = 0 (which ensures that no conversion is ongoing).
pub const fn jqdis(&self) -> bool
pub const fn jqdis(&self) -> bool
Injected Queue disable These bits are set and cleared by software to disable the Injected Queue mechanism : Note: The software is allowed to write this bit only when ADSTART = 0 and JADSTART = 0 (which ensures that no regular nor injected conversion is ongoing). A set or reset of JQDIS bit causes the injected queue to be flushed and the JSQR register is cleared.
pub fn set_jqdis(&mut self, val: bool)
pub fn set_jqdis(&mut self, val: bool)
Injected Queue disable These bits are set and cleared by software to disable the Injected Queue mechanism : Note: The software is allowed to write this bit only when ADSTART = 0 and JADSTART = 0 (which ensures that no regular nor injected conversion is ongoing). A set or reset of JQDIS bit causes the injected queue to be flushed and the JSQR register is cleared.