Struct stm32_metapac::rcc::regs::Cfgr2

#[repr(transparent)]
pub struct Cfgr2(pub u32);

RCC CPU domain clock configuration register 2

Tuple Fields

0: u32

Implementations

impl Cfgr2

pub const fn hpre(&self) -> Hpre

AHB prescaler Set and reset by software to control the division factor of rcc_hclk. Changing this division ratio has an impact on the frequency of all bus matrix clocks 0xxx: rcc_hclk = sys_ck (default after reset)

pub fn set_hpre(&mut self, val: Hpre)

AHB prescaler Set and reset by software to control the division factor of rcc_hclk. Changing this division ratio has an impact on the frequency of all bus matrix clocks 0xxx: rcc_hclk = sys_ck (default after reset)

pub const fn ppre1(&self) -> Ppre

APB low-speed prescaler (APB1) Set and reset by software to control the division factor of rcc_pclk1. The clock is divided by the new prescaler factor from 1 to 16 cycles of rcc_hclk after PPRE write. 0xx: rcc_pclk1 = rcc_hclk1 (default after reset)

pub fn set_ppre1(&mut self, val: Ppre)

APB low-speed prescaler (APB1) Set and reset by software to control the division factor of rcc_pclk1. The clock is divided by the new prescaler factor from 1 to 16 cycles of rcc_hclk after PPRE write. 0xx: rcc_pclk1 = rcc_hclk1 (default after reset)

pub const fn ppre2(&self) -> Ppre

APB high-speed prescaler (APB2) Set and reset by software to control APB high-speed clocks division factor. The clocks are divided with the new prescaler factor from 1 to 16 APB cycles after PPRE2 write. 0xx: rcc_pclk2 = rcc_hclk1

pub fn set_ppre2(&mut self, val: Ppre)

APB high-speed prescaler (APB2) Set and reset by software to control APB high-speed clocks division factor. The clocks are divided with the new prescaler factor from 1 to 16 APB cycles after PPRE2 write. 0xx: rcc_pclk2 = rcc_hclk1

pub const fn ppre3(&self) -> Ppre

APB low-speed prescaler (APB3) Set and reset by software to control APB low-speed clocks division factor. The clocks are divided with the new prescaler factor from 1 to 16 APB cycles after PPRE3 write. 0xx: rcc_pclk3 = rcc_hclk1

pub fn set_ppre3(&mut self, val: Ppre)

APB low-speed prescaler (APB3) Set and reset by software to control APB low-speed clocks division factor. The clocks are divided with the new prescaler factor from 1 to 16 APB cycles after PPRE3 write. 0xx: rcc_pclk3 = rcc_hclk1

pub const fn ahb1dis(&self) -> bool

AHB1 clock disable This bit can be set in order to further reduce power consumption, when none of the AHB1 peripherals from RCC_AHB1ENR are used and when their clocks are disabled in RCC_AHB1ENR. When this bit is set, all the AHB1 peripherals clocks from RCC_AHB1ENR are off. enable control bits

pub fn set_ahb1dis(&mut self, val: bool)

AHB1 clock disable This bit can be set in order to further reduce power consumption, when none of the AHB1 peripherals from RCC_AHB1ENR are used and when their clocks are disabled in RCC_AHB1ENR. When this bit is set, all the AHB1 peripherals clocks from RCC_AHB1ENR are off. enable control bits

pub const fn ahb2dis(&self) -> bool

AHB2 clock disable This bit can be set in order to further reduce power consumption, when none of the AHB2 peripherals from RCC_AHB2ENR are used and when their clocks are disabled in RCC_AHB2ENR. When this bit is set, all the AHB2 peripherals clocks from RCC_AHB2ENR are off. enable control bits

pub fn set_ahb2dis(&mut self, val: bool)

AHB2 clock disable This bit can be set in order to further reduce power consumption, when none of the AHB2 peripherals from RCC_AHB2ENR are used and when their clocks are disabled in RCC_AHB2ENR. When this bit is set, all the AHB2 peripherals clocks from RCC_AHB2ENR are off. enable control bits

pub const fn ahb4dis(&self) -> bool

AHB4 clock disable This bit can be set in order to further reduce power consumption, when none of the AHB4 peripherals from RCC_AHB4ENR are used and when their clocks are disabled in RCC_AHB4ENR. When this bit is set, all the AHB4 peripherals clocks from RCC_AHB4ENR are off. enable control bits

pub fn set_ahb4dis(&mut self, val: bool)

AHB4 clock disable This bit can be set in order to further reduce power consumption, when none of the AHB4 peripherals from RCC_AHB4ENR are used and when their clocks are disabled in RCC_AHB4ENR. When this bit is set, all the AHB4 peripherals clocks from RCC_AHB4ENR are off. enable control bits

pub const fn apb1dis(&self) -> bool

APB1 clock disable value This bit can be set in order to further reduce power consumption, when none of the APB1 peripherals (except IWDG) are used and when their clocks are disabled in RCC_APB1ENR. When this bit is set, all the APB1 peripherals clocks are off, except for IWDG. control bits

pub fn set_apb1dis(&mut self, val: bool)

APB1 clock disable value This bit can be set in order to further reduce power consumption, when none of the APB1 peripherals (except IWDG) are used and when their clocks are disabled in RCC_APB1ENR. When this bit is set, all the APB1 peripherals clocks are off, except for IWDG. control bits

pub const fn apb2dis(&self) -> bool

APB2 clock disable value This bit can be set in order to further reduce power consumption, when none of the APB2 peripherals are used and when their clocks are disabled in RCC_APB2ENR. When this bit is set, all the APB2 peripherals clocks are off. control bits

pub fn set_apb2dis(&mut self, val: bool)

APB2 clock disable value This bit can be set in order to further reduce power consumption, when none of the APB2 peripherals are used and when their clocks are disabled in RCC_APB2ENR. When this bit is set, all the APB2 peripherals clocks are off. control bits

pub const fn apb3dis(&self) -> bool

APB3 clock disable value.Set and cleared by software This bit can be set in order to further reduce power consumption, when none of the APB3 peripherals are used and when their clocks are disabled in RCC_APB3ENR. When this bit is set, all the APB3 peripherals clocks are off. control bits

pub fn set_apb3dis(&mut self, val: bool)

APB3 clock disable value.Set and cleared by software This bit can be set in order to further reduce power consumption, when none of the APB3 peripherals are used and when their clocks are disabled in RCC_APB3ENR. When this bit is set, all the APB3 peripherals clocks are off. control bits

Trait Implementations

impl Clone for Cfgr2

fn clone(&self) -> Cfgr2

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Cfgr2

fn default() -> Cfgr2

Returns the “default value” for a type.

impl PartialEq for Cfgr2

fn eq(&self, other: &Cfgr2) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Cfgr2

impl Eq for Cfgr2

impl StructuralEq for Cfgr2

impl StructuralPartialEq for Cfgr2