Struct stm32_metapac::syscfg::regs::Bklockr

#[repr(transparent)]
pub struct Bklockr(pub u32);

Expand description

SBS break lockup register.

Tuple Fields§

§0: u32

Implementations§

§

impl Bklockr

pub const fn pvd_bl(&self) -> bool

PVD break lock This bit is set by SW and cleared only by a system reset. it can be used to enable and lock the connection to TIM1/8/15/16/17Break input as well as the PVDE and PLS[2:0] bitfields in the PWR_CR1 register. Once set, this bit is cleared only by a system reset.

pub fn set_pvd_bl(&mut self, val: bool)

PVD break lock This bit is set by SW and cleared only by a system reset. it can be used to enable and lock the connection to TIM1/8/15/16/17Break input as well as the PVDE and PLS[2:0] bitfields in the PWR_CR1 register. Once set, this bit is cleared only by a system reset.

pub const fn flashecc_bl(&self) -> bool

Flash ECC error break lock Set this bit to enable and lock the connection between embedded flash memory ECC double error detection flag and break inputs of TIM1/15/16/17 peripherals. Once set, this bit is cleared only by a system reset.

pub fn set_flashecc_bl(&mut self, val: bool)

Flash ECC error break lock Set this bit to enable and lock the connection between embedded flash memory ECC double error detection flag and break inputs of TIM1/15/16/17 peripherals. Once set, this bit is cleared only by a system reset.

pub const fn cm7lckup_bl(&self) -> bool

Cortex-M7 lockup break lock Set this bit to enable and lock the connection between the Cortex-M7 lockup (HardFault) output and break inputs of TIM1/15/16/17 peripherals. Once set, this bit is cleared only by a system reset.

pub fn set_cm7lckup_bl(&mut self, val: bool)

Cortex-M7 lockup break lock Set this bit to enable and lock the connection between the Cortex-M7 lockup (HardFault) output and break inputs of TIM1/15/16/17 peripherals. Once set, this bit is cleared only by a system reset.

pub const fn bkramecc_bl(&self) -> bool

Backup RAM ECC error break lock Set this bit to enable and lock the connection between backup RAM ECC double error detection flag and break inputs of TIM1/15/16/17 peripherals. Once set, this bit is cleared only by a system reset.

pub fn set_bkramecc_bl(&mut self, val: bool)

Backup RAM ECC error break lock Set this bit to enable and lock the connection between backup RAM ECC double error detection flag and break inputs of TIM1/15/16/17 peripherals. Once set, this bit is cleared only by a system reset.

pub const fn dtcmecc_bl(&self) -> bool

DTCM ECC error break lock Set this bit to enable and lock the connection between DTCM ECC double error detection flag and break inputs of TIM1/15/16/17 peripherals. Once set, this bit is cleared only by a system reset. Note: The DTCM0 and DTCM1 are Ored to give DTCMECC.

pub fn set_dtcmecc_bl(&mut self, val: bool)

DTCM ECC error break lock Set this bit to enable and lock the connection between DTCM ECC double error detection flag and break inputs of TIM1/15/16/17 peripherals. Once set, this bit is cleared only by a system reset. Note: The DTCM0 and DTCM1 are Ored to give DTCMECC.

pub const fn itcmecc_bl(&self) -> bool

ITCM ECC error break lock Set this bit to enable and lock the connection between ITCM ECC double error detection flag and break inputs of TIM1/15/16/17 peripherals. Once set, this bit is cleared only by a system reset.

pub fn set_itcmecc_bl(&mut self, val: bool)

ITCM ECC error break lock Set this bit to enable and lock the connection between ITCM ECC double error detection flag and break inputs of TIM1/15/16/17 peripherals. Once set, this bit is cleared only by a system reset.

pub const fn aram3ecc_bl(&self) -> bool

AXIRAM3 ECC error break lock Set this bit to enable and lock the connection between AXIRAM3 ECC double error detection flag and break inputs of TIM1/15/16/17 peripherals. Once set this bit is cleared only by a system reset.

pub fn set_aram3ecc_bl(&mut self, val: bool)

AXIRAM3 ECC error break lock Set this bit to enable and lock the connection between AXIRAM3 ECC double error detection flag and break inputs of TIM1/15/16/17 peripherals. Once set this bit is cleared only by a system reset.

pub const fn aram1ecc_bl(&self) -> bool

AXIRAM1 ECC error break lock Set this bit to enable and lock the connection between AXIRAM1 ECC double error detection flag and break inputs of TIM1/15/16/17 peripherals. Once set, this bit is cleared only by a system reset.

pub fn set_aram1ecc_bl(&mut self, val: bool)

AXIRAM1 ECC error break lock Set this bit to enable and lock the connection between AXIRAM1 ECC double error detection flag and break inputs of TIM1/15/16/17 peripherals. Once set, this bit is cleared only by a system reset.