Struct stm32_metapac::rtc::regs::Wutr

#[repr(transparent)]
pub struct Wutr(pub u32);

Wakeup timer register

Tuple Fields

0: u32

Implementations

impl Wutr

pub const fn wut(&self) -> u16

Wakeup auto-reload value bits. When the wakeup timer is enabled (WUTE set to 1), the WUTF flag is set every (WUT[15:0]

• 1. ck_wut cycles. The ck_wut period is selected through WUCKSEL[2:0] bits of the CR register. When WUCKSEL[2] = 1, the wakeup timer becomes 17-bits and WUCKSEL[1] effectively becomes WUT[16] the most-significant bit to be reloaded into the timer. The first assertion of WUTF occurs between WUT and (WUT + 2) ck_wut cycles after WUTE is set. Setting WUT[15:0] to 0x0000 with WUCKSEL[2:0] = 011 (RTCCLK/2) is forbidden.

pub fn set_wut(&mut self, val: u16)

Wakeup auto-reload value bits. When the wakeup timer is enabled (WUTE set to 1), the WUTF flag is set every (WUT[15:0]

• 1. ck_wut cycles. The ck_wut period is selected through WUCKSEL[2:0] bits of the CR register. When WUCKSEL[2] = 1, the wakeup timer becomes 17-bits and WUCKSEL[1] effectively becomes WUT[16] the most-significant bit to be reloaded into the timer. The first assertion of WUTF occurs between WUT and (WUT + 2) ck_wut cycles after WUTE is set. Setting WUT[15:0] to 0x0000 with WUCKSEL[2:0] = 011 (RTCCLK/2) is forbidden.

pub const fn wutoclr(&self) -> u16

Wakeup auto-reload output clear value. When WUTOCLR[15:0] is different from 0x0000, WUTF is set by hardware when the auto-reload down-counter reaches 0 and is cleared by hardware when the auto-reload downcounter reaches WUTOCLR[15:0]. When WUTOCLR[15:0] = 0x0000, WUTF is set by hardware when the WUT down-counter reaches 0 and is cleared by software.

pub fn set_wutoclr(&mut self, val: u16)

Wakeup auto-reload output clear value. When WUTOCLR[15:0] is different from 0x0000, WUTF is set by hardware when the auto-reload down-counter reaches 0 and is cleared by hardware when the auto-reload downcounter reaches WUTOCLR[15:0]. When WUTOCLR[15:0] = 0x0000, WUTF is set by hardware when the WUT down-counter reaches 0 and is cleared by software.

Trait Implementations

impl Clone for Wutr

fn clone(&self) -> Wutr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Wutr

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Wutr

fn default() -> Wutr

Returns the “default value” for a type.

impl PartialEq for Wutr

fn eq(&self, other: &Wutr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Wutr

impl Eq for Wutr

impl StructuralPartialEq for Wutr