Struct stm32_metapac::rcc::regs::Plldivr2

#[repr(transparent)]
pub struct Plldivr2(pub u32);

RCC PLL1 dividers configuration register 2.

Tuple Fields

0: u32

Implementations

impl Plldivr2

pub const fn plls(&self) -> Plldivst

PLL1 DIVS division factor Set and reset by software to control the frequency of the pll1_s_ck clock. This post-divider performs divisions with 50% duty-cycle. The duty-cycle of 50% is guaranteed only in the following conditions: With VCOL, if (DIVS+1) is even, With VCOH, for all DIVS values These bits can be written only when the PLL1DIVSEN = 0.

pub fn set_plls(&mut self, val: Plldivst)

PLL1 DIVS division factor Set and reset by software to control the frequency of the pll1_s_ck clock. This post-divider performs divisions with 50% duty-cycle. The duty-cycle of 50% is guaranteed only in the following conditions: With VCOL, if (DIVS+1) is even, With VCOH, for all DIVS values These bits can be written only when the PLL1DIVSEN = 0.

pub const fn pllt(&self) -> Plldivst

PLL1 DIVT division factor Set and reset by software to control the frequency of the pll1_t_ck clock. This post-divider performs divisions with 50% duty-cycle. The duty-cycle of 50% is guaranteed only in the following conditions: With VCOL, if (DIVT+1) is even, With VCOH, for all DIVT values These bits can be written only when the PLL1DIVTEN = 0.

pub fn set_pllt(&mut self, val: Plldivst)

PLL1 DIVT division factor Set and reset by software to control the frequency of the pll1_t_ck clock. This post-divider performs divisions with 50% duty-cycle. The duty-cycle of 50% is guaranteed only in the following conditions: With VCOL, if (DIVT+1) is even, With VCOH, for all DIVT values These bits can be written only when the PLL1DIVTEN = 0.

Trait Implementations

impl Clone for Plldivr2

fn clone(&self) -> Plldivr2

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Plldivr2

fn default() -> Plldivr2

Returns the “default value” for a type.

impl PartialEq for Plldivr2

fn eq(&self, other: &Plldivr2) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Plldivr2

impl Eq for Plldivr2

impl StructuralPartialEq for Plldivr2