Struct stm32_metapac::rcc::regs::Ahb5lpenr

#[repr(transparent)]
pub struct Ahb5lpenr(pub u32);

RCC AHB5 low-power clock enable register.

Tuple Fields

0: u32

Implementations

impl Ahb5lpenr

pub const fn hpdma1lpen(&self) -> bool

HPDMA1 low-power peripheral clock enable Set and reset by software.

pub fn set_hpdma1lpen(&mut self, val: bool)

HPDMA1 low-power peripheral clock enable Set and reset by software.

pub const fn dma2dlpen(&self) -> bool

DMA2D low-power peripheral clock enable Set and reset by software.

pub fn set_dma2dlpen(&mut self, val: bool)

DMA2D low-power peripheral clock enable Set and reset by software.

pub const fn flitflpen(&self) -> bool

FLITF low-power peripheral clock enable Set and reset by software.

pub fn set_flitflpen(&mut self, val: bool)

FLITF low-power peripheral clock enable Set and reset by software.

pub const fn jpeglpen(&self) -> bool

JPEG clock enable during Sleep mode Set and reset by software.

pub fn set_jpeglpen(&mut self, val: bool)

JPEG clock enable during Sleep mode Set and reset by software.

pub const fn fmclpen(&self) -> bool

FMC and MCE3 peripheral clocks enable during Sleep mode Set and reset by software. The hardware prevents writing this bit if FMCCKP = 1. The peripheral clocks of the FMC are the kernel clock selected by FMCSEL, and the hclk5 bus interface clock.

pub fn set_fmclpen(&mut self, val: bool)

FMC and MCE3 peripheral clocks enable during Sleep mode Set and reset by software. The hardware prevents writing this bit if FMCCKP = 1. The peripheral clocks of the FMC are the kernel clock selected by FMCSEL, and the hclk5 bus interface clock.

pub const fn xspi1lpen(&self) -> bool

XSPI1 and MCE1 low-power peripheral clock enable Set and reset by software. The hardware prevents writing this bit if XSPICKP = 1.

pub fn set_xspi1lpen(&mut self, val: bool)

XSPI1 and MCE1 low-power peripheral clock enable Set and reset by software. The hardware prevents writing this bit if XSPICKP = 1.

pub const fn sdmmc1lpen(&self) -> bool

SDMMC1 and SDMMC1 delay low-power peripheral clock enable Set and reset by software.

pub fn set_sdmmc1lpen(&mut self, val: bool)

SDMMC1 and SDMMC1 delay low-power peripheral clock enable Set and reset by software.

pub const fn xspi2lpen(&self) -> bool

XSPI2 and MCE2 low-power peripheral clock enable Set and reset by software. The hardware prevents writing this bit if XSPICKP = 1.

pub fn set_xspi2lpen(&mut self, val: bool)

XSPI2 and MCE2 low-power peripheral clock enable Set and reset by software. The hardware prevents writing this bit if XSPICKP = 1.

pub const fn xspimlpen(&self) -> bool

XSPIM low-power peripheral clock enable Set and reset by software.

pub fn set_xspimlpen(&mut self, val: bool)

XSPIM low-power peripheral clock enable Set and reset by software.

pub const fn gfxmmulpen(&self) -> bool

GFXMMU low-power peripheral clock enable Set and reset by software.

pub fn set_gfxmmulpen(&mut self, val: bool)

GFXMMU low-power peripheral clock enable Set and reset by software.

pub const fn gpulpen(&self) -> bool

GPU low-power peripheral clock enable Set and reset by software.

pub fn set_gpulpen(&mut self, val: bool)

GPU low-power peripheral clock enable Set and reset by software.

pub const fn dtcm1lpen(&self) -> bool

DTCM1 low-power peripheral clock enable Set and reset by software.

pub fn set_dtcm1lpen(&mut self, val: bool)

DTCM1 low-power peripheral clock enable Set and reset by software.

pub const fn dtcm2lpen(&self) -> bool

DTCM2 low-power peripheral clock enable Set and reset by software.

pub fn set_dtcm2lpen(&mut self, val: bool)

DTCM2 low-power peripheral clock enable Set and reset by software.

pub const fn itcmlpen(&self) -> bool

ITCM low-power peripheral clock enable Set and reset by software.

pub fn set_itcmlpen(&mut self, val: bool)

ITCM low-power peripheral clock enable Set and reset by software.

pub const fn axisramlpen(&self) -> bool

AXISRAM[4:1] low-power peripheral clock enable Set and reset by software.

pub fn set_axisramlpen(&mut self, val: bool)

AXISRAM[4:1] low-power peripheral clock enable Set and reset by software.

Trait Implementations

impl Clone for Ahb5lpenr

fn clone(&self) -> Ahb5lpenr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Ahb5lpenr

fn default() -> Ahb5lpenr

Returns the “default value” for a type.

impl PartialEq for Ahb5lpenr

fn eq(&self, other: &Ahb5lpenr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Ahb5lpenr

impl Eq for Ahb5lpenr

impl StructuralPartialEq for Ahb5lpenr