Struct stm32_metapac::sai::regs::Clrfr

#[repr(transparent)]
pub struct Clrfr(pub u32);

Clear flag register

Tuple Fields

0: u32

Implementations

impl Clrfr

pub const fn covrudr(&self) -> bool

Clear overrun / underrun. This bit is write only. Programming this bit to 1 clears the OVRUDR flag in the SAI_xSR register. Reading this bit always returns the value 0.

pub fn set_covrudr(&mut self, val: bool)

Clear overrun / underrun. This bit is write only. Programming this bit to 1 clears the OVRUDR flag in the SAI_xSR register. Reading this bit always returns the value 0.

pub const fn cmutedet(&self) -> bool

Mute detection flag. This bit is write only. Programming this bit to 1 clears the MUTEDET flag in the SAI_xSR register. Reading this bit always returns the value 0.

pub fn set_cmutedet(&mut self, val: bool)

Mute detection flag. This bit is write only. Programming this bit to 1 clears the MUTEDET flag in the SAI_xSR register. Reading this bit always returns the value 0.

pub const fn cwckcfg(&self) -> bool

Clear wrong clock configuration flag. This bit is write only. Programming this bit to 1 clears the WCKCFG flag in the SAI_xSR register. This bit is used only when the audio block is set as master (MODE[1] = 0) and NODIV = 0 in the SAI_xCR1 register. Reading this bit always returns the value 0.

pub fn set_cwckcfg(&mut self, val: bool)

Clear wrong clock configuration flag. This bit is write only. Programming this bit to 1 clears the WCKCFG flag in the SAI_xSR register. This bit is used only when the audio block is set as master (MODE[1] = 0) and NODIV = 0 in the SAI_xCR1 register. Reading this bit always returns the value 0.

pub const fn ccnrdy(&self) -> bool

Clear Codec not ready flag. This bit is write only. Programming this bit to 1 clears the CNRDY flag in the SAI_xSR register. This bit is used only when the AC97 audio protocol is selected in the SAI_xCR1 register. Reading this bit always returns the value 0.

pub fn set_ccnrdy(&mut self, val: bool)

Clear Codec not ready flag. This bit is write only. Programming this bit to 1 clears the CNRDY flag in the SAI_xSR register. This bit is used only when the AC97 audio protocol is selected in the SAI_xCR1 register. Reading this bit always returns the value 0.

pub const fn cafsdet(&self) -> bool

Clear anticipated frame synchronization detection flag. This bit is write only. Programming this bit to 1 clears the AFSDET flag in the SAI_xSR register. It is not used in AC97or SPDIF mode. Reading this bit always returns the value 0.

pub fn set_cafsdet(&mut self, val: bool)

Clear anticipated frame synchronization detection flag. This bit is write only. Programming this bit to 1 clears the AFSDET flag in the SAI_xSR register. It is not used in AC97or SPDIF mode. Reading this bit always returns the value 0.

pub const fn clfsdet(&self) -> bool

Clear late frame synchronization detection flag. This bit is write only. Programming this bit to 1 clears the LFSDET flag in the SAI_xSR register. This bit is not used in AC97or SPDIF mode Reading this bit always returns the value 0.

pub fn set_clfsdet(&mut self, val: bool)

Clear late frame synchronization detection flag. This bit is write only. Programming this bit to 1 clears the LFSDET flag in the SAI_xSR register. This bit is not used in AC97or SPDIF mode Reading this bit always returns the value 0.

Trait Implementations

impl Clone for Clrfr

fn clone(&self) -> Clrfr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Clrfr

fn default() -> Clrfr

Returns the “default value” for a type.

impl PartialEq for Clrfr

fn eq(&self, other: &Clrfr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Clrfr

impl Eq for Clrfr

impl StructuralEq for Clrfr

impl StructuralPartialEq for Clrfr