Struct stm32_metapac::pwr::regs::Cr3

#[repr(transparent)]
pub struct Cr3(pub u32);

Expand description

Power control register 3

Tuple Fields§

§0: u32

Implementations§

§

impl Cr3

pub const fn ewup1(&self) -> bool

Enable Wake-up pin WKUP1 When this bit is set, the external wake-up pin WKUP1 is enabled and triggers a wake-up from Standby or Shutdown event when a rising or a falling edge occurs. The active edge is configured via the WP1 bit in the PWR_CR4 register.

pub fn set_ewup1(&mut self, val: bool)

Enable Wake-up pin WKUP1 When this bit is set, the external wake-up pin WKUP1 is enabled and triggers a wake-up from Standby or Shutdown event when a rising or a falling edge occurs. The active edge is configured via the WP1 bit in the PWR_CR4 register.

pub const fn ewup2(&self) -> bool

Enable Wake-up pin WKUP2 When this bit is set, the external wake-up pin WKUP2 is enabled and triggers a wake-up from Standby or Shutdown event when a rising or a falling edge occurs. The active edge is configured via the WP2 bit in the PWR_CR4 register.

pub fn set_ewup2(&mut self, val: bool)

Enable Wake-up pin WKUP2 When this bit is set, the external wake-up pin WKUP2 is enabled and triggers a wake-up from Standby or Shutdown event when a rising or a falling edge occurs. The active edge is configured via the WP2 bit in the PWR_CR4 register.

pub const fn ewup3(&self) -> bool

Enable Wake-up pin WKUP3 When this bit is set, the external wake-up pin WKUP3 is enabled and triggers a wake-up from Standby or Shutdown event when a rising or a falling edge occurs. The active edge is configured via the WP3 bit in the PWR_CR4 register.

pub fn set_ewup3(&mut self, val: bool)

Enable Wake-up pin WKUP3 When this bit is set, the external wake-up pin WKUP3 is enabled and triggers a wake-up from Standby or Shutdown event when a rising or a falling edge occurs. The active edge is configured via the WP3 bit in the PWR_CR4 register.

pub const fn ewup4(&self) -> bool

Enable Wake-up pin WKUP4 When this bit is set, the external wake-up pin WKUP4 is enabled and triggers a wake-up from Standby or Shutdown event when a rising or a falling edge occurs. The active edge is configured via the WP4 bit in the PWR_CR4 register.

pub fn set_ewup4(&mut self, val: bool)

Enable Wake-up pin WKUP4 When this bit is set, the external wake-up pin WKUP4 is enabled and triggers a wake-up from Standby or Shutdown event when a rising or a falling edge occurs. The active edge is configured via the WP4 bit in the PWR_CR4 register.

pub const fn ewup5(&self) -> bool

Enable Wake-up pin WKUP5 When this bit is set, the external wake-up pin WKUP5 is enabled and triggers a wake-up from Standby or Shutdown event when a rising or a falling edge occurs.The active edge is configured via the WP5 bit in the PWR_CR4 register.

pub fn set_ewup5(&mut self, val: bool)

Enable Wake-up pin WKUP5 When this bit is set, the external wake-up pin WKUP5 is enabled and triggers a wake-up from Standby or Shutdown event when a rising or a falling edge occurs.The active edge is configured via the WP5 bit in the PWR_CR4 register.

pub const fn ewup7(&self) -> bool

Enable Wake-up pin WKUP7. When this bit is set, the external wake-up pin WKUP7 is enabled and triggers a wake-up from Standby or Shutdown event when a rising or a falling edge occurs.The active edge is configured via the WP7 bit in the PWR_CR4 register.

pub fn set_ewup7(&mut self, val: bool)

Enable Wake-up pin WKUP7. When this bit is set, the external wake-up pin WKUP7 is enabled and triggers a wake-up from Standby or Shutdown event when a rising or a falling edge occurs.The active edge is configured via the WP7 bit in the PWR_CR4 register.

pub const fn rrs(&self) -> bool

SRAM2 retention in Standby mode

pub fn set_rrs(&mut self, val: bool)

SRAM2 retention in Standby mode

pub const fn enulp(&self) -> bool

Enable ULP sampling When this bit is set, the BORL, BORH and PVD are periodically sampled instead continuous monitoring to reduce power consumption. Fast supply drop between two sample/compare phases is not detected in this mode. This bit has impact only on STOP2, Standby and shutdown low power modes.

pub fn set_enulp(&mut self, val: bool)

Enable ULP sampling When this bit is set, the BORL, BORH and PVD are periodically sampled instead continuous monitoring to reduce power consumption. Fast supply drop between two sample/compare phases is not detected in this mode. This bit has impact only on STOP2, Standby and shutdown low power modes.

pub const fn apc(&self) -> bool

Apply pull-up and pull-down configuration When this bit is set, the I/O pull-up and pull-down configurations defined in the PWR_PUCRx and PWR_PDCRx registers are applied. When this bit is cleared, the PWR_PUCRx and PWR_PDCRx registers are not applied to the I/Os, instead the I/Os are in floating mode during Standby or configured according GPIO controller GPIOx_PUPDR register during RUN mode.

pub fn set_apc(&mut self, val: bool)

Apply pull-up and pull-down configuration When this bit is set, the I/O pull-up and pull-down configurations defined in the PWR_PUCRx and PWR_PDCRx registers are applied. When this bit is cleared, the PWR_PUCRx and PWR_PDCRx registers are not applied to the I/Os, instead the I/Os are in floating mode during Standby or configured according GPIO controller GPIOx_PUPDR register during RUN mode.