Struct stm32_metapac::pwr::regs::Pucrc

#[repr(transparent)]
pub struct Pucrc(pub u32);

Power Port C pull-up control register

Tuple Fields

0: u32

Implementations

impl Pucrc

pub const fn pu0(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu0(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu1(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu1(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu2(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu2(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu3(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu3(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu4(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu4(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu5(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu5(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu6(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu6(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu7(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu7(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu8(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu8(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu9(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu9(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu10(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu10(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu11(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu11(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu12(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu12(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu13(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu13(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu14(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu14(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub const fn pu15(&self) -> bool

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

pub fn set_pu15(&mut self, val: bool)

Port C pull-up bit y When set, this bit activates the pull-up on PC[y] when APC bit is set in PWR_CR3 register. If the corresponding PDy bit is also set, the pull-up is not activated and the pull-down is activated instead with highest priority.

Trait Implementations

impl Clone for Pucrc

fn clone(&self) -> Pucrc

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Pucrc

fn default() -> Pucrc

Returns the “default value” for a type.

impl PartialEq for Pucrc

fn eq(&self, other: &Pucrc) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Pucrc

impl Eq for Pucrc

impl StructuralPartialEq for Pucrc