Struct Cr2 

#[repr(transparent)]
pub struct Cr2(pub u32);

PWR control register 2.

Tuple Fields

0: u32

Implementations

impl Cr2

pub const fn sram1pds1(&self) -> Pds

None 0: SRAM1 page 1 content retained in Stop modes 1: SRAM1 page 1 content lost in Stop modes Note: Page 1 to 2 size is 16 kBytes. Page 3 to 7 size is 32 kBytes.

pub fn set_sram1pds1(&mut self, val: Pds)

None 0: SRAM1 page 1 content retained in Stop modes 1: SRAM1 page 1 content lost in Stop modes Note: Page 1 to 2 size is 16 kBytes. Page 3 to 7 size is 32 kBytes.

pub const fn sram1pds2(&self) -> Pds

None 0: SRAM1 page 2 content retained in Stop modes 1: SRAM1 page 2 content lost in Stop modes Note: Page 1 to 2 size is 16 kBytes. Page 3 to 7 size is 32 kBytes.

pub fn set_sram1pds2(&mut self, val: Pds)

None 0: SRAM1 page 2 content retained in Stop modes 1: SRAM1 page 2 content lost in Stop modes Note: Page 1 to 2 size is 16 kBytes. Page 3 to 7 size is 32 kBytes.

pub const fn sram1pds3(&self) -> Pds

None 0: SRAM1 page 3 content retained in Stop modes 1: SRAM1 page 3 content lost in Stop modes Note: Page 1 to 2 size is 16 kBytes. Page 3 to 7 size is 32 kBytes.

pub fn set_sram1pds3(&mut self, val: Pds)

None 0: SRAM1 page 3 content retained in Stop modes 1: SRAM1 page 3 content lost in Stop modes Note: Page 1 to 2 size is 16 kBytes. Page 3 to 7 size is 32 kBytes.

pub const fn sram1pds4(&self) -> Pds

None 0: SRAM1 page 4 content retained in Stop modes 1: SRAM1 page 4 content lost in Stop modes Note: Page 1 to 2 size is 16 kBytes. Page 3 to 7 size is 32 kBytes.

pub fn set_sram1pds4(&mut self, val: Pds)

None 0: SRAM1 page 4 content retained in Stop modes 1: SRAM1 page 4 content lost in Stop modes Note: Page 1 to 2 size is 16 kBytes. Page 3 to 7 size is 32 kBytes.

pub const fn sram1pds5(&self) -> Pds

None 0: SRAM1 page 5 content retained in Stop modes 1: SRAM1 page 5 content lost in Stop modes Note: Page 1 to 2 size is 16 kBytes. Page 3 to 7 size is 32 kBytes.

pub fn set_sram1pds5(&mut self, val: Pds)

None 0: SRAM1 page 5 content retained in Stop modes 1: SRAM1 page 5 content lost in Stop modes Note: Page 1 to 2 size is 16 kBytes. Page 3 to 7 size is 32 kBytes.

pub const fn sram1pds6(&self) -> Pds

None 0: SRAM1 page 6 content retained in Stop modes 1: SRAM1 page 6 content lost in Stop modes Note: Page 1 to 2 size is 16 kBytes. Page 3 to 7 size is 32 kBytes.

pub fn set_sram1pds6(&mut self, val: Pds)

None 0: SRAM1 page 6 content retained in Stop modes 1: SRAM1 page 6 content lost in Stop modes Note: Page 1 to 2 size is 16 kBytes. Page 3 to 7 size is 32 kBytes.

pub const fn sram1pds7(&self) -> Pds

None 0: SRAM1 page 7 content retained in Stop modes 1: SRAM1 page 7 content lost in Stop modes Note: Page 1 to 2 size is 16 kBytes. Page 3 to 7 size is 32 kBytes.

pub fn set_sram1pds7(&mut self, val: Pds)

None 0: SRAM1 page 7 content retained in Stop modes 1: SRAM1 page 7 content lost in Stop modes Note: Page 1 to 2 size is 16 kBytes. Page 3 to 7 size is 32 kBytes.

pub const fn sram2pds1(&self) -> Pds

None 0: SRAM2 page 1 content retained in Stop modes 1: SRAM2 page 1 content lost in Stop modes.

pub fn set_sram2pds1(&mut self, val: Pds)

None 0: SRAM2 page 1 content retained in Stop modes 1: SRAM2 page 1 content lost in Stop modes.

pub const fn sram2pds2(&self) -> Pds

None 0: SRAM2 page 2 content retained in Stop modes 1: SRAM2 page 2 content lost in Stop modes.

pub fn set_sram2pds2(&mut self, val: Pds)

None 0: SRAM2 page 2 content retained in Stop modes 1: SRAM2 page 2 content lost in Stop modes.

pub const fn sram2pds3(&self) -> Pds

None 0: SRAM2 page 3 content retained in Stop modes 1: SRAM2 page 3 content lost in Stop modes.

pub fn set_sram2pds3(&mut self, val: Pds)

None 0: SRAM2 page 3 content retained in Stop modes 1: SRAM2 page 3 content lost in Stop modes.

pub const fn icrampds(&self) -> Pds

None 0: ICACHE SRAM content retained in Stop modes 1: ICACHE SRAM content lost in Stop modes.

pub fn set_icrampds(&mut self, val: Pds)

None 0: ICACHE SRAM content retained in Stop modes 1: ICACHE SRAM content lost in Stop modes.

pub const fn prampds(&self) -> Pds

None 0: FDCAN and USB peripherals SRAM content retained in Stop modes 1: FDCAN and USB peripherals SRAM content lost in Stop modes.

pub fn set_prampds(&mut self, val: Pds)

None 0: FDCAN and USB peripherals SRAM content retained in Stop modes 1: FDCAN and USB peripherals SRAM content lost in Stop modes.

pub const fn pkarampds(&self) -> Pds

None 0: PKA SRAM content retained in Stop modes 1: PKA SRAM content lost in Stop modes.

pub fn set_pkarampds(&mut self, val: Pds)

None 0: PKA SRAM content retained in Stop modes 1: PKA SRAM content lost in Stop modes.

pub const fn sramfwu(&self) -> Sramfwu

This bit is used to obtain the best trade-off between low-power consumption and wakeup time. SRAMs wakeup time increases the wakeup time when exiting Stop 0 and 1 modes, and also increases the GPDMA1 access time to SRAMs during Stop modes. 0: SRAMs enters low-power mode in Stop 0 and Stop 1 modes (source biasing for lower-power consumption). 1: SRAMs remains in normal mode in Stop 0 and Stop 1 modes (higher consumption but no SRAM wakeup time). Note: in case one or several SRAMs are configured to be in power-down in Stop mode, setting SRAMFWU bit has no effect.

pub fn set_sramfwu(&mut self, val: Sramfwu)

This bit is used to obtain the best trade-off between low-power consumption and wakeup time. SRAMs wakeup time increases the wakeup time when exiting Stop 0 and 1 modes, and also increases the GPDMA1 access time to SRAMs during Stop modes. 0: SRAMs enters low-power mode in Stop 0 and Stop 1 modes (source biasing for lower-power consumption). 1: SRAMs remains in normal mode in Stop 0 and Stop 1 modes (higher consumption but no SRAM wakeup time). Note: in case one or several SRAMs are configured to be in power-down in Stop mode, setting SRAMFWU bit has no effect.

pub const fn flashfwu(&self) -> Flashfwu

This bit is used to obtain the best trade-off between low-power consumption and wakeup time when exiting the Stop 0 or Stop 1 modes. When this bit is set, the Flash memory remains in normal mode in Stop 0 and Stop 1 modes, which offers a faster startup time with higher consumption. 0: Flash memory enters low-power mode in Stop 0 and Stop 1 modes (lower-power consumption). 1: Flash memory remains in normal mode in Stop 0 and Stop 1 modes (faster wakeup time).

pub fn set_flashfwu(&mut self, val: Flashfwu)

This bit is used to obtain the best trade-off between low-power consumption and wakeup time when exiting the Stop 0 or Stop 1 modes. When this bit is set, the Flash memory remains in normal mode in Stop 0 and Stop 1 modes, which offers a faster startup time with higher consumption. 0: Flash memory enters low-power mode in Stop 0 and Stop 1 modes (lower-power consumption). 1: Flash memory remains in normal mode in Stop 0 and Stop 1 modes (faster wakeup time).

Trait Implementations

impl Clone for Cr2

fn clone(&self) -> Cr2

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Debug for Cr2

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Default for Cr2

fn default() -> Cr2

Returns the “default value” for a type.

impl PartialEq for Cr2

fn eq(&self, other: &Cr2) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Cr2

impl Eq for Cr2

impl StructuralPartialEq for Cr2