Struct stm32_metapac::flash::regs::Acr

#[repr(transparent)]
pub struct Acr(pub u32);

FLASH access control register

Tuple Fields

0: u32

Implementations

impl Acr

pub const fn latency(&self) -> u8

Latency These bits represent the ratio between the HCLK (AHB clock) period and the Flash memory access time. …

pub fn set_latency(&mut self, val: u8)

Latency These bits represent the ratio between the HCLK (AHB clock) period and the Flash memory access time. …

pub const fn prften(&self) -> bool

Prefetch enable This bit enables the prefetch buffer in the embedded Flash memory.

pub fn set_prften(&mut self, val: bool)

Prefetch enable This bit enables the prefetch buffer in the embedded Flash memory.

pub const fn lpm(&self) -> Lpm

Low-power read mode This bit puts the Flash memory in low-power read mode.

pub fn set_lpm(&mut self, val: Lpm)

Low-power read mode This bit puts the Flash memory in low-power read mode.

pub const fn pdreq1(&self) -> Pdreq

Bank 1 power-down mode request This bit is write-protected with FLASH_PDKEY1R. This bit requests bank 1 to enter power-down mode. When bank 1 enters power-down mode, this bit is cleared by hardware and the PDKEY1R is locked.

pub fn set_pdreq1(&mut self, val: Pdreq)

Bank 1 power-down mode request This bit is write-protected with FLASH_PDKEY1R. This bit requests bank 1 to enter power-down mode. When bank 1 enters power-down mode, this bit is cleared by hardware and the PDKEY1R is locked.

pub const fn pdreq2(&self) -> Pdreq

Bank 2 power-down mode request This bit is write-protected with FLASH_PDKEY2R. This bit requests bank 2 to enter power-down mode. When bank 2 enters power-down mode, this bit is cleared by hardware and the PDKEY2R is locked.

pub fn set_pdreq2(&mut self, val: Pdreq)

Bank 2 power-down mode request This bit is write-protected with FLASH_PDKEY2R. This bit requests bank 2 to enter power-down mode. When bank 2 enters power-down mode, this bit is cleared by hardware and the PDKEY2R is locked.

pub const fn sleep_pd(&self) -> SleepPd

Flash memory power-down mode during Sleep mode This bit determines whether the Flash memory is in power-down mode or Idle mode when the device is in Sleep mode. The Flash must not be put in power-down while a program or an erase operation is on-going.

pub fn set_sleep_pd(&mut self, val: SleepPd)

Flash memory power-down mode during Sleep mode This bit determines whether the Flash memory is in power-down mode or Idle mode when the device is in Sleep mode. The Flash must not be put in power-down while a program or an erase operation is on-going.

Trait Implementations

impl Clone for Acr

fn clone(&self) -> Acr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Acr

fn default() -> Acr

Returns the “default value” for a type.

impl PartialEq for Acr

fn eq(&self, other: &Acr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Acr

impl Eq for Acr

impl StructuralEq for Acr

impl StructuralPartialEq for Acr