Struct stm32_metapac::lptim::regs::Ccmr

#[repr(transparent)]
pub struct Ccmr(pub u32);

LPTIM capture/compare mode register 1.

Tuple Fields

0: u32

Implementations

impl Ccmr

pub const fn ccsel(&self, n: usize) -> Ccsel

Capture/compare 1 selection This bitfield defines the direction of the channel input (capture) or output mode.

pub fn set_ccsel(&mut self, n: usize, val: Ccsel)

Capture/compare 1 selection This bitfield defines the direction of the channel input (capture) or output mode.

pub const fn cce(&self, n: usize) -> bool

Capture/compare 1 output enable. This bit determines if a capture of the counter value can actually be done into the input capture/compare register 1 (LPTIM_CCR1) or not.

pub fn set_cce(&mut self, n: usize, val: bool)

Capture/compare 1 output enable. This bit determines if a capture of the counter value can actually be done into the input capture/compare register 1 (LPTIM_CCR1) or not.

pub const fn ccp_input(&self, n: usize) -> CcpInput

Capture/compare 1 output polarity. Only bit2 is used to set polarity when output mode is enabled, bit3 is don’t care. This field is used to select the IC1 polarity for capture operations.

pub fn set_ccp_input(&mut self, n: usize, val: CcpInput)

Capture/compare 1 output polarity. Only bit2 is used to set polarity when output mode is enabled, bit3 is don’t care. This field is used to select the IC1 polarity for capture operations.

pub const fn ccp_output(&self, n: usize) -> CcpOutput

Capture/compare 1 output polarity. Only bit2 is used to set polarity when output mode is enabled, bit3 is don’t care. This field is used to select the IC1 polarity for capture operations.

pub fn set_ccp_output(&mut self, n: usize, val: CcpOutput)

Capture/compare 1 output polarity. Only bit2 is used to set polarity when output mode is enabled, bit3 is don’t care. This field is used to select the IC1 polarity for capture operations.

pub const fn icpsc(&self, n: usize) -> Filter

Input capture 1 prescaler This bitfield defines the ratio of the prescaler acting on the CC1 input (IC1).

pub fn set_icpsc(&mut self, n: usize, val: Filter)

Input capture 1 prescaler This bitfield defines the ratio of the prescaler acting on the CC1 input (IC1).

pub const fn icf(&self, n: usize) -> Filter

Input capture 1 filter This bitfield defines the number of consecutive equal samples that should be detected when a level change occurs on an external input capture signal before it is considered as a valid level transition. An internal clock source must be present to use this feature.

pub fn set_icf(&mut self, n: usize, val: Filter)

Input capture 1 filter This bitfield defines the number of consecutive equal samples that should be detected when a level change occurs on an external input capture signal before it is considered as a valid level transition. An internal clock source must be present to use this feature.

Trait Implementations

impl Clone for Ccmr

fn clone(&self) -> Ccmr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Ccmr

fn default() -> Ccmr

Returns the “default value” for a type.

impl PartialEq for Ccmr

fn eq(&self, other: &Ccmr) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Ccmr

impl Eq for Ccmr

impl StructuralEq for Ccmr

impl StructuralPartialEq for Ccmr