Struct stm32_metapac::rcc::regs::Apb2smenr
#[repr(transparent)]pub struct Apb2smenr(pub u32);Expand description
RCC APB2 peripheral clocks enable in Sleep and Stop modes register
Tuple Fields§
§0: u32Implementations§
§impl Apb2smenr
impl Apb2smenr
pub const fn tim1smen(&self) -> bool
pub const fn tim1smen(&self) -> bool
TIM1 clocks enable during Sleep and Stop modes Set and cleared by software.
pub fn set_tim1smen(&mut self, val: bool)
pub fn set_tim1smen(&mut self, val: bool)
TIM1 clocks enable during Sleep and Stop modes Set and cleared by software.
pub const fn spi1smen(&self) -> bool
pub const fn spi1smen(&self) -> bool
SPI1 clocks enable during Sleep and Stop modes Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.
pub fn set_spi1smen(&mut self, val: bool)
pub fn set_spi1smen(&mut self, val: bool)
SPI1 clocks enable during Sleep and Stop modes Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.
pub const fn tim8smen(&self) -> bool
pub const fn tim8smen(&self) -> bool
TIM8 clocks enable during Sleep and Stop modes Set and cleared by software.
pub fn set_tim8smen(&mut self, val: bool)
pub fn set_tim8smen(&mut self, val: bool)
TIM8 clocks enable during Sleep and Stop modes Set and cleared by software.
pub const fn usart1smen(&self) -> bool
pub const fn usart1smen(&self) -> bool
USART1clocks enable during Sleep and Stop modes Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.
pub fn set_usart1smen(&mut self, val: bool)
pub fn set_usart1smen(&mut self, val: bool)
USART1clocks enable during Sleep and Stop modes Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.
pub const fn tim15smen(&self) -> bool
pub const fn tim15smen(&self) -> bool
TIM15 clocks enable during Sleep and Stop modes Set and cleared by software.
pub fn set_tim15smen(&mut self, val: bool)
pub fn set_tim15smen(&mut self, val: bool)
TIM15 clocks enable during Sleep and Stop modes Set and cleared by software.
pub const fn tim16smen(&self) -> bool
pub const fn tim16smen(&self) -> bool
TIM16 clocks enable during Sleep and Stop modes Set and cleared by software.
pub fn set_tim16smen(&mut self, val: bool)
pub fn set_tim16smen(&mut self, val: bool)
TIM16 clocks enable during Sleep and Stop modes Set and cleared by software.
pub const fn tim17smen(&self) -> bool
pub const fn tim17smen(&self) -> bool
TIM17 clocks enable during Sleep and Stop modes Set and cleared by software.
pub fn set_tim17smen(&mut self, val: bool)
pub fn set_tim17smen(&mut self, val: bool)
TIM17 clocks enable during Sleep and Stop modes Set and cleared by software.
pub const fn sai1smen(&self) -> bool
pub const fn sai1smen(&self) -> bool
SAI1 clocks enable during Sleep and Stop modes Set and cleared by software.
pub fn set_sai1smen(&mut self, val: bool)
pub fn set_sai1smen(&mut self, val: bool)
SAI1 clocks enable during Sleep and Stop modes Set and cleared by software.
pub const fn sai2smen(&self) -> bool
pub const fn sai2smen(&self) -> bool
SAI2 clocks enable during Sleep and Stop modes Set and cleared by software.
pub fn set_sai2smen(&mut self, val: bool)
pub fn set_sai2smen(&mut self, val: bool)
SAI2 clocks enable during Sleep and Stop modes Set and cleared by software.
pub const fn usbsmen(&self) -> bool
pub const fn usbsmen(&self) -> bool
USB clock enable during Sleep and Stop modes This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.
pub fn set_usbsmen(&mut self, val: bool)
pub fn set_usbsmen(&mut self, val: bool)
USB clock enable during Sleep and Stop modes This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.
pub const fn gfxtimsmen(&self) -> bool
pub const fn gfxtimsmen(&self) -> bool
GFXTIM clock enable during Sleep and Stop modes This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.
pub fn set_gfxtimsmen(&mut self, val: bool)
pub fn set_gfxtimsmen(&mut self, val: bool)
GFXTIM clock enable during Sleep and Stop modes This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.
pub const fn ltdcsmen(&self) -> bool
pub const fn ltdcsmen(&self) -> bool
LTDC clock enable during Sleep and Stop modes This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.
pub fn set_ltdcsmen(&mut self, val: bool)
pub fn set_ltdcsmen(&mut self, val: bool)
LTDC clock enable during Sleep and Stop modes This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.
pub const fn dsismen(&self) -> bool
pub const fn dsismen(&self) -> bool
DSI clock enable during Sleep and Stop modes This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.
pub fn set_dsismen(&mut self, val: bool)
pub fn set_dsismen(&mut self, val: bool)
DSI clock enable during Sleep and Stop modes This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.