Struct stm32_metapac::tamp::regs::Atcr1

#[repr(transparent)]
pub struct Atcr1(pub u32);

TAMP active tamper control register 1

Tuple Fields

0: u32

Implementations

impl Atcr1

pub const fn tampam(&self, n: usize) -> bool

Tamper X active mode

pub fn set_tampam(&mut self, n: usize, val: bool)

Tamper X active mode

pub const fn atosel(&self, n: usize) -> u8

Active tamper shared output X selection. The selected output must be available in the package pinout

pub fn set_atosel(&mut self, n: usize, val: u8)

Active tamper shared output X selection. The selected output must be available in the package pinout

pub const fn atcksel(&self) -> Atcksel

Active tamper RTC asynchronous prescaler clock selection. These bits selects the RTC asynchronous prescaler stage output.The selected clock is CK_ATPRE.. fCK_ATPRE = fRTCCLK / 2ATCKSEL when (PREDIV_A+1) = 128.. …. These bits can be written only when all active tampers are disabled. The write protection remains for up to 1.5 ck_atpre cycles after all the active tampers are disable.

pub fn set_atcksel(&mut self, val: Atcksel)

Active tamper RTC asynchronous prescaler clock selection. These bits selects the RTC asynchronous prescaler stage output.The selected clock is CK_ATPRE.. fCK_ATPRE = fRTCCLK / 2ATCKSEL when (PREDIV_A+1) = 128.. …. These bits can be written only when all active tampers are disabled. The write protection remains for up to 1.5 ck_atpre cycles after all the active tampers are disable.

pub const fn atper(&self) -> u8

Active tamper output change period. The tamper output is changed every CK_ATPER = (2ATPER x CK_ATPRE) cycles. Refer to .

pub fn set_atper(&mut self, val: u8)

Active tamper output change period. The tamper output is changed every CK_ATPER = (2ATPER x CK_ATPRE) cycles. Refer to .

pub const fn atoshare(&self) -> bool

Active tamper output sharing. IN1 is compared with TAMPOUTSEL1. IN2 is compared with TAMPOUTSEL2. IN3 is compared with TAMPOUTSEL3. IN4 is compared with TAMPOUTSEL4. IN5 is compared with TAMPOUTSEL5. IN6 is compared with TAMPOUTSEL6. IN7 is compared with TAMPOUTSEL7. IN8 is compared with TAMPOUTSEL8

pub fn set_atoshare(&mut self, val: bool)

Active tamper output sharing. IN1 is compared with TAMPOUTSEL1. IN2 is compared with TAMPOUTSEL2. IN3 is compared with TAMPOUTSEL3. IN4 is compared with TAMPOUTSEL4. IN5 is compared with TAMPOUTSEL5. IN6 is compared with TAMPOUTSEL6. IN7 is compared with TAMPOUTSEL7. IN8 is compared with TAMPOUTSEL8

pub const fn flten(&self) -> bool

Active tamper filter enable

pub fn set_flten(&mut self, val: bool)

Active tamper filter enable

Trait Implementations

impl Clone for Atcr1

fn clone(&self) -> Atcr1

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Atcr1

fn default() -> Atcr1

Returns the “default value” for a type.

impl PartialEq for Atcr1

fn eq(&self, other: &Atcr1) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Atcr1

impl Eq for Atcr1

impl StructuralEq for Atcr1

impl StructuralPartialEq for Atcr1