stm32-metapac

Crates

git

Versions

stm32u575vg

Flavors

Struct stm32_metapac::pwr::regs::Cr2

#[repr(transparent)]
pub struct Cr2(pub u32);
Expand description

control register 2

Tuple Fields§

§0: u32

Implementations§

§

impl Cr2

pub const fn sram1pds1(&self) -> Pds

SRAM1 page 1 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub fn set_sram1pds1(&mut self, val: Pds)

SRAM1 page 1 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub const fn sram1pds2(&self) -> Pds

SRAM1 page 2 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub fn set_sram1pds2(&mut self, val: Pds)

SRAM1 page 2 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub const fn sram1pds3(&self) -> Pds

SRAM1 page 3 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub fn set_sram1pds3(&mut self, val: Pds)

SRAM1 page 3 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub const fn sram2pds1(&self) -> Pds

SRAM2 page 1 (8 Kbytes) power-down in Stop modes (Stop 0, 1, 2) Note: The SRAM2 page 1 retention in Stop 3 is controlled by RRSB1 bit in CR1.

pub fn set_sram2pds1(&mut self, val: Pds)

SRAM2 page 1 (8 Kbytes) power-down in Stop modes (Stop 0, 1, 2) Note: The SRAM2 page 1 retention in Stop 3 is controlled by RRSB1 bit in CR1.

pub const fn sram2pds2(&self) -> Pds

SRAM2 page 2 (56 Kbytes) power-down in Stop modes (Stop 0, 1, 2) Note: The SRAM2 page 2 retention in Stop 3 is controlled by RRSB2 bit in CR1.

pub fn set_sram2pds2(&mut self, val: Pds)

SRAM2 page 2 (56 Kbytes) power-down in Stop modes (Stop 0, 1, 2) Note: The SRAM2 page 2 retention in Stop 3 is controlled by RRSB2 bit in CR1.

pub const fn sram4pds(&self) -> Pds

SRAM4 power-down in Stop modes (Stop 0, 1, 2, 3)

pub fn set_sram4pds(&mut self, val: Pds)

SRAM4 power-down in Stop modes (Stop 0, 1, 2, 3)

pub const fn icrampds(&self) -> Pds

ICACHE SRAM power-down in Stop modes (Stop 0, 1, 2, 3)

pub fn set_icrampds(&mut self, val: Pds)

ICACHE SRAM power-down in Stop modes (Stop 0, 1, 2, 3)

pub const fn dc1rampds(&self) -> Pds

DCACHE1 SRAM power-down in Stop modes (Stop 0, 1, 2, 3)

pub fn set_dc1rampds(&mut self, val: Pds)

DCACHE1 SRAM power-down in Stop modes (Stop 0, 1, 2, 3)

pub const fn dma2drampds(&self) -> Pds

DMA2D SRAM power-down in Stop modes (Stop 0, 1, 2, 3)

pub fn set_dma2drampds(&mut self, val: Pds)

DMA2D SRAM power-down in Stop modes (Stop 0, 1, 2, 3)

pub const fn prampds(&self) -> Pds

FMAC, FDCAN and USB peripherals SRAM power-down in Stop modes (Stop0,1,2,3)

pub fn set_prampds(&mut self, val: Pds)

FMAC, FDCAN and USB peripherals SRAM power-down in Stop modes (Stop0,1,2,3)

pub const fn pkarampds(&self) -> Pds

PKA SRAM power-down

pub fn set_pkarampds(&mut self, val: Pds)

PKA SRAM power-down

pub const fn sram4fwu(&self) -> Sramfwu

SRAM4 fast wakeup from Stop 0, Stop 1 and Stop 2 modes This bit is used to obtain the best trade-off between low-power consumption and wakeup time. SRAM4 wakeup time increases the wakeup time when exiting Stop 0, 1 and 2 modes, and also increases the LPDMA access time to SRAM4 during Stop modes.

pub fn set_sram4fwu(&mut self, val: Sramfwu)

SRAM4 fast wakeup from Stop 0, Stop 1 and Stop 2 modes This bit is used to obtain the best trade-off between low-power consumption and wakeup time. SRAM4 wakeup time increases the wakeup time when exiting Stop 0, 1 and 2 modes, and also increases the LPDMA access time to SRAM4 during Stop modes.

pub const fn flashfwu(&self) -> Flashfwu

Flash memory fast wakeup from Stop 0 and Stop 1 modes This bit is used to obtain the best trade-off between low-power consumption and wakeup time when exiting the Stop 0 or Stop 1 modes. When this bit is set, the Flash memory remains in normal mode in Stop 0 and Stop 1 modes, which offers a faster startup time with higher consumption.

pub fn set_flashfwu(&mut self, val: Flashfwu)

Flash memory fast wakeup from Stop 0 and Stop 1 modes This bit is used to obtain the best trade-off between low-power consumption and wakeup time when exiting the Stop 0 or Stop 1 modes. When this bit is set, the Flash memory remains in normal mode in Stop 0 and Stop 1 modes, which offers a faster startup time with higher consumption.

pub const fn sram3pds1(&self) -> Pds

SRAM3 page 1 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub fn set_sram3pds1(&mut self, val: Pds)

SRAM3 page 1 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub const fn sram3pds2(&self) -> Pds

SRAM3 page 2 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub fn set_sram3pds2(&mut self, val: Pds)

SRAM3 page 2 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub const fn sram3pds3(&self) -> Pds

SRAM3 page 3 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub fn set_sram3pds3(&mut self, val: Pds)

SRAM3 page 3 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub const fn sram3pds4(&self) -> Pds

SRAM3 page 4 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub fn set_sram3pds4(&mut self, val: Pds)

SRAM3 page 4 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub const fn sram3pds5(&self) -> Pds

SRAM3 page 5 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub fn set_sram3pds5(&mut self, val: Pds)

SRAM3 page 5 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub const fn sram3pds6(&self) -> Pds

SRAM3 page 6 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub fn set_sram3pds6(&mut self, val: Pds)

SRAM3 page 6 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub const fn sram3pds7(&self) -> Pds

SRAM3 page 7 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub fn set_sram3pds7(&mut self, val: Pds)

SRAM3 page 7 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub const fn sram3pds8(&self) -> Pds

SRAM3 page 8 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub fn set_sram3pds8(&mut self, val: Pds)

SRAM3 page 8 (64 Kbytes) power-down in Stop modes (Stop 0, 1, 2, 3)

pub const fn srdrun(&self) -> bool

SmartRun domain in Run mode

pub fn set_srdrun(&mut self, val: bool)

SmartRun domain in Run mode

Trait Implementations§

§

impl Clone for Cr2

§

fn clone(&self) -> Cr2

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
§

impl Default for Cr2

§

fn default() -> Cr2

Returns the “default value” for a type. Read more
§

impl PartialEq for Cr2

§

fn eq(&self, other: &Cr2) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
§

impl Copy for Cr2

§

impl Eq for Cr2

§

impl StructuralPartialEq for Cr2

Auto Trait Implementations§

§

impl Freeze for Cr2

§

impl RefUnwindSafe for Cr2

§

impl Send for Cr2

§

impl Sync for Cr2

§

impl Unpin for Cr2

§

impl UnwindSafe for Cr2

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

source§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.