stm32-metapac

Crates

git

Versions

stm32u575zg

Flavors

Struct stm32_metapac::rcc::regs::Ahb2enr1

#[repr(transparent)]
pub struct Ahb2enr1(pub u32);
Expand description

RCC AHB2 peripheral clock enable register 1

Tuple Fields§

§0: u32

Implementations§

§

impl Ahb2enr1

pub const fn gpioaen(&self) -> bool

IO port A clock enable Set and cleared by software.

pub fn set_gpioaen(&mut self, val: bool)

IO port A clock enable Set and cleared by software.

pub const fn gpioben(&self) -> bool

IO port B clock enable Set and cleared by software.

pub fn set_gpioben(&mut self, val: bool)

IO port B clock enable Set and cleared by software.

pub const fn gpiocen(&self) -> bool

IO port C clock enable Set and cleared by software.

pub fn set_gpiocen(&mut self, val: bool)

IO port C clock enable Set and cleared by software.

pub const fn gpioden(&self) -> bool

IO port D clock enable Set and cleared by software.

pub fn set_gpioden(&mut self, val: bool)

IO port D clock enable Set and cleared by software.

pub const fn gpioeen(&self) -> bool

IO port E clock enable Set and cleared by software.

pub fn set_gpioeen(&mut self, val: bool)

IO port E clock enable Set and cleared by software.

pub const fn gpiofen(&self) -> bool

IO port F clock enable Set and cleared by software.

pub fn set_gpiofen(&mut self, val: bool)

IO port F clock enable Set and cleared by software.

pub const fn gpiogen(&self) -> bool

IO port G clock enable Set and cleared by software.

pub fn set_gpiogen(&mut self, val: bool)

IO port G clock enable Set and cleared by software.

pub const fn gpiohen(&self) -> bool

IO port H clock enable Set and cleared by software.

pub fn set_gpiohen(&mut self, val: bool)

IO port H clock enable Set and cleared by software.

pub const fn gpioien(&self) -> bool

IO port I clock enable Set and cleared by software.

pub fn set_gpioien(&mut self, val: bool)

IO port I clock enable Set and cleared by software.

pub const fn gpiojen(&self) -> bool

I/O port J clock enable This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.

pub fn set_gpiojen(&mut self, val: bool)

I/O port J clock enable This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.

pub const fn adc12en(&self) -> bool

ADC1 and ADC2 clock enable This bit is set and cleared by software. Note: This bit impacts ADC1 in STM32U535/545/575/585, and ADC1/ADC2 in�STM32U59x/5Ax/5Fx/5Gx.

pub fn set_adc12en(&mut self, val: bool)

ADC1 and ADC2 clock enable This bit is set and cleared by software. Note: This bit impacts ADC1 in STM32U535/545/575/585, and ADC1/ADC2 in�STM32U59x/5Ax/5Fx/5Gx.

pub const fn dcmien(&self) -> bool

DCMI and PSSI clock enable Set and cleared by software.

pub fn set_dcmien(&mut self, val: bool)

DCMI and PSSI clock enable Set and cleared by software.

pub const fn usb_otg_fsen(&self) -> bool

OTG_FS clock enable Set and cleared by software.

pub fn set_usb_otg_fsen(&mut self, val: bool)

OTG_FS clock enable Set and cleared by software.

pub const fn usb_otg_hsen(&self) -> bool

OTG_HS clock enable Set and cleared by software.

pub fn set_usb_otg_hsen(&mut self, val: bool)

OTG_HS clock enable Set and cleared by software.

pub const fn usb_otg_hs_phyen(&self) -> bool

OTG_HS PHY clock enable This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.

pub fn set_usb_otg_hs_phyen(&mut self, val: bool)

OTG_HS PHY clock enable This bit is set and cleared by software. Note: This bit is only available on some devices in the STM32U5 Series. Refer to the device datasheet for availability of its associated peripheral. If not present, consider this bit as reserved and keep it at reset value.

pub const fn aesen(&self) -> bool

AES clock enable Set and cleared by software.

pub fn set_aesen(&mut self, val: bool)

AES clock enable Set and cleared by software.

pub const fn hashen(&self) -> bool

HASH clock enable Set and cleared by software

pub fn set_hashen(&mut self, val: bool)

HASH clock enable Set and cleared by software

pub const fn rngen(&self) -> bool

RNG clock enable Set and cleared by software.

pub fn set_rngen(&mut self, val: bool)

RNG clock enable Set and cleared by software.

pub const fn pkaen(&self) -> bool

PKA clock enable Set and cleared by software.

pub fn set_pkaen(&mut self, val: bool)

PKA clock enable Set and cleared by software.

pub const fn saesen(&self) -> bool

SAES clock enable Set and cleared by software.

pub fn set_saesen(&mut self, val: bool)

SAES clock enable Set and cleared by software.

pub const fn octospimen(&self) -> bool

OCTOSPIM clock enable Set and cleared by software.

pub fn set_octospimen(&mut self, val: bool)

OCTOSPIM clock enable Set and cleared by software.

pub const fn otfdec1en(&self) -> bool

OTFDEC1 clock enable Set and cleared by software.

pub fn set_otfdec1en(&mut self, val: bool)

OTFDEC1 clock enable Set and cleared by software.

pub const fn otfdec2en(&self) -> bool

OTFDEC2 clock enable Set and cleared by software.

pub fn set_otfdec2en(&mut self, val: bool)

OTFDEC2 clock enable Set and cleared by software.

pub const fn sdmmc1en(&self) -> bool

SDMMC1 clock enable Set and cleared by software.

pub fn set_sdmmc1en(&mut self, val: bool)

SDMMC1 clock enable Set and cleared by software.

pub const fn sdmmc2en(&self) -> bool

SDMMC2 clock enable Set and cleared by software.

pub fn set_sdmmc2en(&mut self, val: bool)

SDMMC2 clock enable Set and cleared by software.

pub const fn sram2en(&self) -> bool

SRAM2 clock enable Set and reset by software.

pub fn set_sram2en(&mut self, val: bool)

SRAM2 clock enable Set and reset by software.

pub const fn sram3en(&self) -> bool

SRAM3 clock enable Set and reset by software.

pub fn set_sram3en(&mut self, val: bool)

SRAM3 clock enable Set and reset by software.

Trait Implementations§

§

impl Clone for Ahb2enr1

§

fn clone(&self) -> Ahb2enr1

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
§

impl Default for Ahb2enr1

§

fn default() -> Ahb2enr1

Returns the “default value” for a type. Read more
§

impl PartialEq for Ahb2enr1

§

fn eq(&self, other: &Ahb2enr1) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
§

impl Copy for Ahb2enr1

§

impl Eq for Ahb2enr1

§

impl StructuralPartialEq for Ahb2enr1

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

source§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.