Struct stm32_metapac::saes::regs::Sr
#[repr(transparent)]pub struct Sr(pub u32);Expand description
SAES status register.
Tuple Fields§
§0: u32Implementations§
§impl Sr
impl Sr
pub const fn ccf(&self) -> bool
pub const fn ccf(&self) -> bool
Computation completed flag. This bit mirrors the CCF bit of the SAES_ISR register.
pub fn set_ccf(&mut self, val: bool)
pub fn set_ccf(&mut self, val: bool)
Computation completed flag. This bit mirrors the CCF bit of the SAES_ISR register.
pub const fn rderr(&self) -> bool
pub const fn rderr(&self) -> bool
Read error flag This flag indicates the detection of an unexpected read operation from the SAES_DOUTR register (during computation or data input phase): The flag is set by hardware. It is cleared by software upon setting the RWEIF bit of the SAES_ICR register. Upon the flag setting, an interrupt is generated if enabled through the RWEIE bit of the SAES_ICR register. The flag setting has no impact on the SAES operation. Unexpected read returns zero.
pub fn set_rderr(&mut self, val: bool)
pub fn set_rderr(&mut self, val: bool)
Read error flag This flag indicates the detection of an unexpected read operation from the SAES_DOUTR register (during computation or data input phase): The flag is set by hardware. It is cleared by software upon setting the RWEIF bit of the SAES_ICR register. Upon the flag setting, an interrupt is generated if enabled through the RWEIE bit of the SAES_ICR register. The flag setting has no impact on the SAES operation. Unexpected read returns zero.
pub const fn wrerr(&self) -> bool
pub const fn wrerr(&self) -> bool
Write error This flag indicates the detection of an unexpected write operation to the SAES_DINR register (during computation or data output phase): The flag is set by hardware. It is cleared by software upon setting the RWEIF bit of the SAES_ICR register. Upon the flag setting, an interrupt is generated if enabled through the RWEIE bit of the SAES_ICR register. The flag setting has no impact on the SAES operation. Unexpected write is ignored.
pub fn set_wrerr(&mut self, val: bool)
pub fn set_wrerr(&mut self, val: bool)
Write error This flag indicates the detection of an unexpected write operation to the SAES_DINR register (during computation or data output phase): The flag is set by hardware. It is cleared by software upon setting the RWEIF bit of the SAES_ICR register. Upon the flag setting, an interrupt is generated if enabled through the RWEIE bit of the SAES_ICR register. The flag setting has no impact on the SAES operation. Unexpected write is ignored.
pub const fn busy(&self) -> bool
pub const fn busy(&self) -> bool
Busy This flag indicates whether SAES is idle or busy during GCM payload encryption phase: The flag is set upon SAES initialization, upon fetching random number from the RNG, or upon transferring a shared key to a target peripheral. When GCM encryption is selected, the flag must be at zero before selecting the GCM final phase.
pub fn set_busy(&mut self, val: bool)
pub fn set_busy(&mut self, val: bool)
Busy This flag indicates whether SAES is idle or busy during GCM payload encryption phase: The flag is set upon SAES initialization, upon fetching random number from the RNG, or upon transferring a shared key to a target peripheral. When GCM encryption is selected, the flag must be at zero before selecting the GCM final phase.
pub const fn keyvalid(&self) -> bool
pub const fn keyvalid(&self) -> bool
Key Valid flag This bit is set by hardware when the amount of key information defined by KEYSIZE in SAES_CR has been loaded in SAES_KEYx key registers. In normal mode when KEYSEL equals to zero, the application must write the key registers in the correct sequence, otherwise the KEIF flag of the SAES_ISR register is set and KEYVALID stays at zero. When KEYSEL is different from zero the BUSY flag is automatically set by SAES. When key is loaded successfully, the BUSY flag is cleared and KEYVALID set. Upon an error, the KEIF flag of the SAES_ISR register is set, the BUSY flag cleared and KEYVALID kept at zero. When the KEIF flag is set, the application must clear it through the SAES_ICR register, otherwise KEYVALID cannot be set. See the KEIF bit description for more details. For more information on key loading please refer to.
pub fn set_keyvalid(&mut self, val: bool)
pub fn set_keyvalid(&mut self, val: bool)
Key Valid flag This bit is set by hardware when the amount of key information defined by KEYSIZE in SAES_CR has been loaded in SAES_KEYx key registers. In normal mode when KEYSEL equals to zero, the application must write the key registers in the correct sequence, otherwise the KEIF flag of the SAES_ISR register is set and KEYVALID stays at zero. When KEYSEL is different from zero the BUSY flag is automatically set by SAES. When key is loaded successfully, the BUSY flag is cleared and KEYVALID set. Upon an error, the KEIF flag of the SAES_ISR register is set, the BUSY flag cleared and KEYVALID kept at zero. When the KEIF flag is set, the application must clear it through the SAES_ICR register, otherwise KEYVALID cannot be set. See the KEIF bit description for more details. For more information on key loading please refer to.