Struct stm32_metapac::dsihost::regs::Isr0

#[repr(transparent)]
pub struct Isr0(pub u32);

DSI Host interrupt and status register 0.

Tuple Fields

0: u32

Implementations

impl Isr0

pub const fn ae0(&self) -> bool

Acknowledge error 0 This bit retrieves the SoT error from the acknowledge error report.

pub fn set_ae0(&mut self, val: bool)

Acknowledge error 0 This bit retrieves the SoT error from the acknowledge error report.

pub const fn ae1(&self) -> bool

Acknowledge error 1 This bit retrieves the SoT sync error from the acknowledge error report.

pub fn set_ae1(&mut self, val: bool)

Acknowledge error 1 This bit retrieves the SoT sync error from the acknowledge error report.

pub const fn ae2(&self) -> bool

Acknowledge error 2 This bit retrieves the EoT sync error from the acknowledge error report.

pub fn set_ae2(&mut self, val: bool)

Acknowledge error 2 This bit retrieves the EoT sync error from the acknowledge error report.

pub const fn ae3(&self) -> bool

Acknowledge error 3 This bit retrieves the escape mode entry command error from the acknowledge error report.

pub fn set_ae3(&mut self, val: bool)

Acknowledge error 3 This bit retrieves the escape mode entry command error from the acknowledge error report.

pub const fn ae4(&self) -> bool

Acknowledge error 4 This bit retrieves the LP transmit sync error from the acknowledge error report.

pub fn set_ae4(&mut self, val: bool)

Acknowledge error 4 This bit retrieves the LP transmit sync error from the acknowledge error report.

pub const fn ae5(&self) -> bool

Acknowledge error 5 This bit retrieves the peripheral timeout error from the acknowledge error report.

pub fn set_ae5(&mut self, val: bool)

Acknowledge error 5 This bit retrieves the peripheral timeout error from the acknowledge error report.

pub const fn ae6(&self) -> bool

Acknowledge error 6 This bit retrieves the false control error from the acknowledge error report.

pub fn set_ae6(&mut self, val: bool)

Acknowledge error 6 This bit retrieves the false control error from the acknowledge error report.

pub const fn ae7(&self) -> bool

Acknowledge error 7 This bit retrieves the reserved (specific to the device) from the acknowledge error report.

pub fn set_ae7(&mut self, val: bool)

Acknowledge error 7 This bit retrieves the reserved (specific to the device) from the acknowledge error report.

pub const fn ae8(&self) -> bool

Acknowledge error 8 This bit retrieves the ECC error, single-bit (detected and corrected) from the acknowledge error report.

pub fn set_ae8(&mut self, val: bool)

Acknowledge error 8 This bit retrieves the ECC error, single-bit (detected and corrected) from the acknowledge error report.

pub const fn ae9(&self) -> bool

Acknowledge error 9 This bit retrieves the ECC error, multi-bit (detected, not corrected) from the acknowledge error report.

pub fn set_ae9(&mut self, val: bool)

Acknowledge error 9 This bit retrieves the ECC error, multi-bit (detected, not corrected) from the acknowledge error report.

pub const fn ae10(&self) -> bool

Acknowledge error 10 This bit retrieves the checksum error (long packet only) from the acknowledge error report.

pub fn set_ae10(&mut self, val: bool)

Acknowledge error 10 This bit retrieves the checksum error (long packet only) from the acknowledge error report.

pub const fn ae11(&self) -> bool

Acknowledge error 11 This bit retrieves the not recognized DSI data type from the acknowledge error report.

pub fn set_ae11(&mut self, val: bool)

Acknowledge error 11 This bit retrieves the not recognized DSI data type from the acknowledge error report.

pub const fn ae12(&self) -> bool

Acknowledge error 12 This bit retrieves the DSI VC ID Invalid from the acknowledge error report.

pub fn set_ae12(&mut self, val: bool)

Acknowledge error 12 This bit retrieves the DSI VC ID Invalid from the acknowledge error report.

pub const fn ae13(&self) -> bool

Acknowledge error 13 This bit retrieves the invalid transmission length from the acknowledge error report.

pub fn set_ae13(&mut self, val: bool)

Acknowledge error 13 This bit retrieves the invalid transmission length from the acknowledge error report.

pub const fn ae14(&self) -> bool

Acknowledge error 14 This bit retrieves the reserved (specific to the device) from the acknowledge error report.

pub fn set_ae14(&mut self, val: bool)

Acknowledge error 14 This bit retrieves the reserved (specific to the device) from the acknowledge error report.

pub const fn ae15(&self) -> bool

Acknowledge error 15 This bit retrieves the DSI protocol violation from the acknowledge error report.

pub fn set_ae15(&mut self, val: bool)

Acknowledge error 15 This bit retrieves the DSI protocol violation from the acknowledge error report.

pub const fn pe0(&self) -> bool

PHY error 0 This bit indicates the ErrEsc escape entry error from lane 0.

pub fn set_pe0(&mut self, val: bool)

PHY error 0 This bit indicates the ErrEsc escape entry error from lane 0.

pub const fn pe1(&self) -> bool

PHY error 1 This bit indicates the ErrSyncEsc low-power transmission synchronization error from lane 0.

pub fn set_pe1(&mut self, val: bool)

PHY error 1 This bit indicates the ErrSyncEsc low-power transmission synchronization error from lane 0.

pub const fn pe2(&self) -> bool

PHY error 2 This bit indicates the ErrControl error from lane 0.

pub fn set_pe2(&mut self, val: bool)

PHY error 2 This bit indicates the ErrControl error from lane 0.

pub const fn pe3(&self) -> bool

PHY error 3 This bit indicates the LP0 contention error ErrContentionLP0 from lane 0.

pub fn set_pe3(&mut self, val: bool)

PHY error 3 This bit indicates the LP0 contention error ErrContentionLP0 from lane 0.

pub const fn pe4(&self) -> bool

PHY error 4 This bit indicates the LP1 contention error ErrContentionLP1 from lane 0.

pub fn set_pe4(&mut self, val: bool)

PHY error 4 This bit indicates the LP1 contention error ErrContentionLP1 from lane 0.

Trait Implementations

impl Clone for Isr0

fn clone(&self) -> Isr0

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Isr0

fn default() -> Isr0

Returns the “default value” for a type.

impl PartialEq for Isr0

fn eq(&self, other: &Isr0) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Isr0

impl Eq for Isr0

impl StructuralEq for Isr0

impl StructuralPartialEq for Isr0