Struct stm32_metapac::rcc::regs::Srdamr

#[repr(transparent)]
pub struct Srdamr(pub u32);

RCC SmartRun domain peripheral autonomous mode register

Tuple Fields

0: u32

Implementations

impl Srdamr

pub const fn spi3amen(&self) -> bool

SPI3 autonomous mode enable in Stop 0,1, 2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_spi3amen(&mut self, val: bool)

SPI3 autonomous mode enable in Stop 0,1, 2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn lpuart1amen(&self) -> bool

LPUART1 autonomous mode enable in Stop 0,1, 2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_lpuart1amen(&mut self, val: bool)

LPUART1 autonomous mode enable in Stop 0,1, 2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn i2c3amen(&self) -> bool

I2C3 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_i2c3amen(&mut self, val: bool)

I2C3 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn lptim1amen(&self) -> bool

LPTIM1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_lptim1amen(&mut self, val: bool)

LPTIM1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn lptim3amen(&self) -> bool

LPTIM3 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_lptim3amen(&mut self, val: bool)

LPTIM3 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn lptim4amen(&self) -> bool

LPTIM4 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_lptim4amen(&mut self, val: bool)

LPTIM4 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn opampamen(&self) -> bool

OPAMP autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

pub fn set_opampamen(&mut self, val: bool)

OPAMP autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

pub const fn compamen(&self) -> bool

COMP autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

pub fn set_compamen(&mut self, val: bool)

COMP autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

pub const fn vrefamen(&self) -> bool

VREFBUF autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

pub fn set_vrefamen(&mut self, val: bool)

VREFBUF autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

pub const fn rtcapbamen(&self) -> bool

RTC and TAMP autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_rtcapbamen(&mut self, val: bool)

RTC and TAMP autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn adc4amen(&self) -> bool

ADC4 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_adc4amen(&mut self, val: bool)

ADC4 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn lpgpio1amen(&self) -> bool

LPGPIO1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

pub fn set_lpgpio1amen(&mut self, val: bool)

LPGPIO1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

pub const fn dac1amen(&self) -> bool

DAC1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_dac1amen(&mut self, val: bool)

DAC1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn lpdma1amen(&self) -> bool

LPDMA1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_lpdma1amen(&mut self, val: bool)

LPDMA1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn adf1amen(&self) -> bool

ADF1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub fn set_adf1amen(&mut self, val: bool)

ADF1 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software. Note: This bit must be set to allow the peripheral to wake up from Stop modes.

pub const fn sram4amen(&self) -> bool

SRAM4 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

pub fn set_sram4amen(&mut self, val: bool)

SRAM4 autonomous mode enable in Stop 0,1,2 mode Set and cleared by software.

Trait Implementations

impl Clone for Srdamr

fn clone(&self) -> Srdamr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Srdamr

fn default() -> Srdamr

Returns the “default value” for a type.

impl PartialEq for Srdamr

fn eq(&self, other: &Srdamr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Srdamr

impl Eq for Srdamr

impl StructuralPartialEq for Srdamr