Struct stm32_metapac::pwr::regs::Cr2

#[repr(transparent)]
pub struct Cr2(pub u32);

control register 2

Tuple Fields

0: u32

Implementations

impl Cr2

pub const fn sram1pds1(&self) -> Srampds

SRAM1 power-down in Stop modes (Stop 0, 1) Note: The SRAM1 retention in Standby mode is controlled by R1RSB1 bit in CR1.

pub fn set_sram1pds1(&mut self, val: Srampds)

SRAM1 power-down in Stop modes (Stop 0, 1) Note: The SRAM1 retention in Standby mode is controlled by R1RSB1 bit in CR1.

pub const fn sram2pds1(&self) -> Srampds

SRAM2 power-down in Stop modes (Stop 0, 1) Note: The SRAM2 retention in Standby mode is controlled by R2RSB1 bit in CR1.

pub fn set_sram2pds1(&mut self, val: Srampds)

SRAM2 power-down in Stop modes (Stop 0, 1) Note: The SRAM2 retention in Standby mode is controlled by R2RSB1 bit in CR1.

pub const fn icrampds(&self) -> Icrampds

ICACHE SRAM power-down in Stop modes (Stop 0, 1)

pub fn set_icrampds(&mut self, val: Icrampds)

ICACHE SRAM power-down in Stop modes (Stop 0, 1)

pub const fn flashfwu(&self) -> Flashfwu

Flash memory fast wakeup from Stop modes (Stop 0, 1) This bit is used to obtain the best trade-off between low-power consumption and wakeup time when exiting the Stop 0 or Stop 1 modes. When this bit is set, the Flash memory remains in normal mode in Stop 0 and Stop 1 modes, which offers a faster startup time with higher consumption.

pub fn set_flashfwu(&mut self, val: Flashfwu)

Flash memory fast wakeup from Stop modes (Stop 0, 1) This bit is used to obtain the best trade-off between low-power consumption and wakeup time when exiting the Stop 0 or Stop 1 modes. When this bit is set, the Flash memory remains in normal mode in Stop 0 and Stop 1 modes, which offers a faster startup time with higher consumption.

Trait Implementations

impl Clone for Cr2

fn clone(&self) -> Cr2

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Cr2

fn default() -> Cr2

Returns the “default value” for a type.

impl PartialEq for Cr2

fn eq(&self, other: &Cr2) -> bool

This method tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Cr2

impl Eq for Cr2

impl StructuralEq for Cr2

impl StructuralPartialEq for Cr2