Struct stm32_metapac::pwr::regs::Wucr3

#[repr(transparent)]
pub struct Wucr3(pub u32);

wakeup control register 3

Tuple Fields

0: u32

Implementations

impl Wucr3

pub const fn wusel1(&self) -> Wusel

Wakeup and interrupt pin WKUP1 selection This field must be configured when WUPEN1 = 0. Access can be secured by WUP1SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with SPRIV or when non-secure with NSPRIV.

pub fn set_wusel1(&mut self, val: Wusel)

Wakeup and interrupt pin WKUP1 selection This field must be configured when WUPEN1 = 0. Access can be secured by WUP1SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with SPRIV or when non-secure with NSPRIV.

pub const fn wusel2(&self) -> Wusel

Wakeup and interrupt pin WKUP2 selection This field must be configured when WUPEN2 = 0. Access can be secured by WUP2SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with SPRIV or when non-secure with NSPRIV.

pub fn set_wusel2(&mut self, val: Wusel)

Wakeup and interrupt pin WKUP2 selection This field must be configured when WUPEN2 = 0. Access can be secured by WUP2SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with SPRIV or when non-secure with NSPRIV.

pub const fn wusel3(&self) -> Wusel

Wakeup and interrupt pin WKUP3 selection This field must be configured when WUPEN3 = 0. Access can be secured by WUP3SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with SPRIV or when non-secure with NSPRIV.

pub fn set_wusel3(&mut self, val: Wusel)

Wakeup and interrupt pin WKUP3 selection This field must be configured when WUPEN3 = 0. Access can be secured by WUP3SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with SPRIV or when non-secure with NSPRIV.

pub const fn wusel4(&self) -> Wusel

Wakeup and interrupt pin WKUP4 selection This field must be configured when WUPEN4 = 0. Access can be secured by WUP4SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with SPRIV or when non-secure with NSPRIV.

pub fn set_wusel4(&mut self, val: Wusel)

Wakeup and interrupt pin WKUP4 selection This field must be configured when WUPEN4 = 0. Access can be secured by WUP4SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with SPRIV or when non-secure with NSPRIV.

pub const fn wusel5(&self) -> Wusel

Wakeup and interrupt pin WKUP5 selection This field must be configured when WUPEN5 = 0. Access can be secured by WUP5SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with SPRIV or when non-secure with NSPRIV.

pub fn set_wusel5(&mut self, val: Wusel)

Wakeup and interrupt pin WKUP5 selection This field must be configured when WUPEN5 = 0. Access can be secured by WUP5SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with SPRIV or when non-secure with NSPRIV.

pub const fn wusel6(&self) -> Wusel

Wakeup and interrupt pin WKUP6 selection This field must be configured when WUPEN6 = 0. Access can be secured by WUP6SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with SPRIV or when non-secure with NSPRIV.

pub fn set_wusel6(&mut self, val: Wusel)

Wakeup and interrupt pin WKUP6 selection This field must be configured when WUPEN6 = 0. Access can be secured by WUP6SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with SPRIV or when non-secure with NSPRIV.

pub const fn wusel7(&self) -> Wusel

Wakeup and interrupt pin WKUP7 selection This field must be configured when WUPEN7 = 0. Access can be secured by WUP7SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with SPRIV or when non-secure with NSPRIV.

pub fn set_wusel7(&mut self, val: Wusel)

Wakeup and interrupt pin WKUP7 selection This field must be configured when WUPEN7 = 0. Access can be secured by WUP7SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with SPRIV or when non-secure with NSPRIV.

pub const fn wusel8(&self) -> Wusel

Wakeup and interrupt pin WKUP8 selection This field must be configured when WUPEN8 = 0. Access can be secured by WUP8SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with SPRIV or when non-secure with NSPRIV.

pub fn set_wusel8(&mut self, val: Wusel)

Wakeup and interrupt pin WKUP8 selection This field must be configured when WUPEN8 = 0. Access can be secured by WUP8SEC. When secure, a non-secure read/write access is RAZ/WI. It does not generate an illegal access interrupt. This bit can be protected against unprivileged access when secure with SPRIV or when non-secure with NSPRIV.

Trait Implementations

impl Clone for Wucr3

fn clone(&self) -> Wucr3

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Wucr3

fn default() -> Wucr3

Returns the “default value” for a type.

impl PartialEq for Wucr3

fn eq(&self, other: &Wucr3) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Wucr3

impl Eq for Wucr3

impl StructuralPartialEq for Wucr3