Struct stm32_metapac::syscfg::regs::Cfgr2

#[repr(transparent)]
pub struct Cfgr2(pub u32);

configuration register 2

Tuple Fields

0: u32

Implementations

impl Cfgr2

pub const fn cll(&self) -> bool

Cortex-M33 LOCKUP (hardfault) output enable This bit is set by software and cleared only by a system reset. It can be used to enable and lock the connection of Cortex-M33 LOCKUP (hardfault) output to TIM1/16/17 break input.

pub fn set_cll(&mut self, val: bool)

Cortex-M33 LOCKUP (hardfault) output enable This bit is set by software and cleared only by a system reset. It can be used to enable and lock the connection of Cortex-M33 LOCKUP (hardfault) output to TIM1/16/17 break input.

pub const fn spl(&self) -> bool

SRAM2 parity lock bit This bit is set by software and cleared only by a system reset. It can be used to enable and lock the SRAM2 parity error signal connection to TIM1/16/17 break inputs.

pub fn set_spl(&mut self, val: bool)

SRAM2 parity lock bit This bit is set by software and cleared only by a system reset. It can be used to enable and lock the SRAM2 parity error signal connection to TIM1/16/17 break inputs.

pub const fn pvdl(&self) -> bool

PVD lock enable bit This bit is set by software and cleared only by a system reset. It can be used to enable and lock the PVD connection to TIM1/16/17 break input, as well as the PVDE and PVDLS[2:0] in the PWR register.

pub fn set_pvdl(&mut self, val: bool)

PVD lock enable bit This bit is set by software and cleared only by a system reset. It can be used to enable and lock the PVD connection to TIM1/16/17 break input, as well as the PVDE and PVDLS[2:0] in the PWR register.

pub const fn eccl(&self) -> bool

ECC lock This bit is set by software and cleared only by a system reset. It can be used to enable and lock the Flash ECC double error signal connection to TIM1/16/17 break input.

pub fn set_eccl(&mut self, val: bool)

ECC lock This bit is set by software and cleared only by a system reset. It can be used to enable and lock the Flash ECC double error signal connection to TIM1/16/17 break input.

Trait Implementations

impl Clone for Cfgr2

fn clone(&self) -> Cfgr2

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Cfgr2

fn default() -> Cfgr2

Returns the “default value” for a type.

impl PartialEq for Cfgr2

fn eq(&self, other: &Cfgr2) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Cfgr2

impl Eq for Cfgr2

impl StructuralPartialEq for Cfgr2