Struct Uarte 

pub struct Uarte { /* private fields */ }

UART with EasyDMA 0.

Implementations

impl Uarte

pub const unsafe fn from_ptr(ptr: *mut ()) -> Uarte

pub const fn as_ptr(&self) -> *mut ()

pub const fn tasks_dma(self) -> TasksDma

pub const fn tasks_flushrx(self) -> Reg<u32, W>

Flush RX FIFO into RX buffer.

pub const fn subscribe_startrx(self) -> Reg<Subscribe, RW>

Subscribe configuration for task STARTRX.

pub const fn subscribe_stoprx(self) -> Reg<Subscribe, RW>

Subscribe configuration for task STOPRX.

pub const fn subscribe_starttx(self) -> Reg<Subscribe, RW>

Subscribe configuration for task STARTTX.

pub const fn subscribe_stoptx(self) -> Reg<Subscribe, RW>

Subscribe configuration for task STOPTX.

pub const fn subscribe_flushrx(self) -> Reg<Subscribe, RW>

Subscribe configuration for task FLUSHRX.

pub const fn events_cts(self) -> Reg<u32, RW>

CTS is activated (set low). Clear To Send.

pub const fn events_ncts(self) -> Reg<u32, RW>

CTS is deactivated (set high). Not Clear To Send.

pub const fn events_rxdrdy(self) -> Reg<u32, RW>

Data received in RXD (but potentially not yet transferred to Data RAM).

pub const fn events_dma(self) -> EventsDma

pub const fn events_txdrdy(self) -> Reg<u32, RW>

Data sent from TXD.

pub const fn events_error(self) -> Reg<u32, RW>

Error detected.

pub const fn events_rxto(self) -> Reg<u32, RW>

Receiver timeout.

pub const fn events_txstopped(self) -> Reg<u32, RW>

Transmitter stopped.

pub const fn publish_cts(self) -> Reg<Publish, RW>

Publish configuration for event CTS.

pub const fn publish_ncts(self) -> Reg<Publish, RW>

Publish configuration for event NCTS.

pub const fn publish_rxdrdy(self) -> Reg<Publish, RW>

Publish configuration for event RXDRDY.

pub const fn publish_endrx(self) -> Reg<Publish, RW>

Publish configuration for event ENDRX.

pub const fn publish_txdrdy(self) -> Reg<Publish, RW>

Publish configuration for event TXDRDY.

pub const fn publish_endtx(self) -> Reg<Publish, RW>

Publish configuration for event ENDTX.

pub const fn publish_error(self) -> Reg<Publish, RW>

Publish configuration for event ERROR.

pub const fn publish_rxto(self) -> Reg<Publish, RW>

Publish configuration for event RXTO.

pub const fn publish_rxstarted(self) -> Reg<Publish, RW>

Publish configuration for event RXSTARTED.

pub const fn publish_txstarted(self) -> Reg<Publish, RW>

Publish configuration for event TXSTARTED.

pub const fn publish_txstopped(self) -> Reg<Publish, RW>

Publish configuration for event TXSTOPPED.

pub const fn shorts(self) -> Reg<Shorts, RW>

Shortcuts between local events and tasks.

pub const fn inten(self) -> Reg<Int, RW>

Enable or disable interrupt.

pub const fn intenset(self) -> Reg<Int, RW>

Enable interrupt.

pub const fn intenclr(self) -> Reg<Int, RW>

Disable interrupt.

pub const fn errorsrc(self) -> Reg<Errorsrc, RW>

Error source.

pub const fn enable(self) -> Reg<Enable, RW>

Enable UART.

pub const fn psel(self) -> Psel

Unspecified.

pub const fn baudrate(self) -> Reg<Baudrate, RW>

Baud rate. Accuracy depends on the HFCLK source selected.

pub const fn dma(self) -> Dma

pub const fn config(self) -> Reg<Config, RW>

Configuration of parity and hardware flow control.

Trait Implementations

impl Clone for Uarte

fn clone(&self) -> Uarte

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl PartialEq for Uarte

fn eq(&self, other: &Uarte) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Uarte

impl Eq for Uarte

impl Send for Uarte

impl StructuralPartialEq for Uarte

impl Sync for Uarte