Struct UartTx

pub struct UartTx<'d, T: Instance, M: Mode> { /* private fields */ }

UART TX driver.

Implementations

impl<'d, T: Instance, M: Mode> UartTx<'d, T, M>

pub fn new( _uart: impl Peripheral<P = T> + 'd, tx: impl Peripheral<P = impl TxPin<T>> + 'd, tx_dma: impl Peripheral<P = impl Channel> + 'd, config: Config, ) -> Self

Create a new DMA-enabled UART which can only send data

pub fn blocking_write(&mut self, buffer: &[u8]) -> Result<(), Error>

Transmit the provided buffer blocking execution until done.

pub fn blocking_flush(&mut self) -> Result<(), Error>

Flush UART TX blocking execution until done.

pub fn busy(&self) -> bool

Check if UART is busy transmitting.

pub async fn send_break(&mut self, bits: u32)

Assert a break condition after waiting for the transmit buffers to empty, for the specified number of bit times. This condition must be asserted for at least two frame times to be effective, bits will adjusted according to frame size, parity, and stop bit settings to ensure this.

This method may block for a long amount of time since it has to wait for the transmit fifo to empty, which may take a while on slow links.

impl<'d, T: Instance> UartTx<'d, T, Blocking>

pub fn new_blocking( _uart: impl Peripheral<P = T> + 'd, tx: impl Peripheral<P = impl TxPin<T>> + 'd, config: Config, ) -> Self

Create a new UART TX instance for blocking mode operations.

pub fn into_buffered( self, irq: impl Binding<T::Interrupt, BufferedInterruptHandler<T>>, tx_buffer: &'d mut [u8], ) -> BufferedUartTx<'d, T>

Convert this uart TX instance into a buffered uart using the provided irq and transmit buffer.

impl<'d, T: Instance> UartTx<'d, T, Async>

pub async fn write(&mut self, buffer: &[u8]) -> Result<(), Error>

Write to UART TX from the provided buffer using DMA.

Trait Implementations

impl<'d, T: Instance> ErrorType for UartTx<'d, T, Blocking>

type Error = Error

Error type of all the IO operations on this type.

impl<'d, T: Instance, M: Mode> ErrorType for UartTx<'d, T, M>

type Error = Error

Error type

impl<'d, T: Instance> Write for UartTx<'d, T, Blocking>

fn write(&mut self, buf: &[u8]) -> Result<usize, Self::Error>

Write a buffer into this writer, returning how many bytes were written.

fn flush(&mut self) -> Result<(), Self::Error>

Flush this output stream, blocking until all intermediately buffered contents reach their destination.

fn write_all(&mut self, buf: &[u8]) -> Result<(), Self::Error>

Write an entire buffer into this writer.

fn write_fmt( &mut self, fmt: Arguments<'_>, ) -> Result<(), WriteFmtError<Self::Error>>

Write a formatted string into this writer, returning any error encountered.

impl<'d, T: Instance, M: Mode> Write for UartTx<'d, T, M>

fn write(&mut self, char: u8) -> Result<(), Self::Error>

Writes a single word to the serial interface.

fn flush(&mut self) -> Result<(), Self::Error>

Ensures that none of the previously written words are still buffered.

impl<'d, T: Instance, M: Mode> Write<u8> for UartTx<'d, T, M>

type Error = Error

The type of error that can occur when writing

fn bwrite_all(&mut self, buffer: &[u8]) -> Result<(), Self::Error>

Writes a slice, blocking until everything has been written

fn bflush(&mut self) -> Result<(), Self::Error>

Block until the serial interface has sent all buffered words

impl<'d, T: Instance, M: Mode> Write<u8> for UartTx<'d, T, M>

type Error = Error

Write error

fn write(&mut self, word: u8) -> Result<(), Error<Self::Error>>

Writes a single word to the serial interface

fn flush(&mut self) -> Result<(), Error<Self::Error>>

Ensures that none of the previously written words are still buffered