Struct Radio

pub struct Radio { /* private fields */ }

2.4 GHz radio

Implementations

impl Radio

pub const unsafe fn from_ptr(ptr: *mut ()) -> Self

pub const fn as_ptr(&self) -> *mut ()

pub const fn tasks_txen(self) -> Reg<u32, W>

Enable RADIO in TX mode

pub const fn tasks_rxen(self) -> Reg<u32, W>

Enable RADIO in RX mode

pub const fn tasks_start(self) -> Reg<u32, W>

Start RADIO

pub const fn tasks_stop(self) -> Reg<u32, W>

Stop RADIO

pub const fn tasks_disable(self) -> Reg<u32, W>

Disable RADIO

pub const fn tasks_rssistart(self) -> Reg<u32, W>

Start the RSSI and take one single sample of the receive signal strength

pub const fn tasks_rssistop(self) -> Reg<u32, W>

Stop the RSSI measurement

pub const fn tasks_bcstart(self) -> Reg<u32, W>

Start the bit counter

pub const fn tasks_bcstop(self) -> Reg<u32, W>

Stop the bit counter

pub const fn events_ready(self) -> Reg<u32, RW>

RADIO has ramped up and is ready to be started

pub const fn events_address(self) -> Reg<u32, RW>

Address sent or received

pub const fn events_payload(self) -> Reg<u32, RW>

Packet payload sent or received

pub const fn events_end(self) -> Reg<u32, RW>

Packet sent or received

pub const fn events_disabled(self) -> Reg<u32, RW>

RADIO has been disabled

pub const fn events_devmatch(self) -> Reg<u32, RW>

A device address match occurred on the last received packet

pub const fn events_devmiss(self) -> Reg<u32, RW>

No device address match occurred on the last received packet

pub const fn events_rssiend(self) -> Reg<u32, RW>

Sampling of receive signal strength complete

pub const fn events_bcmatch(self) -> Reg<u32, RW>

Bit counter reached bit count value

pub const fn events_crcok(self) -> Reg<u32, RW>

Packet received with CRC ok

pub const fn events_crcerror(self) -> Reg<u32, RW>

Packet received with CRC error

pub const fn events_txready(self) -> Reg<u32, RW>

RADIO has ramped up and is ready to be started TX path

pub const fn events_rxready(self) -> Reg<u32, RW>

RADIO has ramped up and is ready to be started RX path

pub const fn events_phyend(self) -> Reg<u32, RW>

Generated when last bit is sent on air, or received from air

pub const fn shorts(self) -> Reg<Shorts, RW>

Shortcuts between local events and tasks

pub const fn intenset(self) -> Reg<Int, RW>

Enable interrupt

pub const fn intenclr(self) -> Reg<Int, RW>

Disable interrupt

pub const fn crcstatus(self) -> Reg<Crcstatus, R>

CRC status

pub const fn rxmatch(self) -> Reg<Rxmatch, R>

Received address

pub const fn rxcrc(self) -> Reg<Rxcrc, R>

CRC field of previously received packet

pub const fn dai(self) -> Reg<Dai, R>

Device address match index

pub const fn pdustat(self) -> Reg<Pdustat, R>

Payload status

pub const fn packetptr(self) -> Reg<u32, RW>

Packet pointer

pub const fn frequency(self) -> Reg<Frequency, RW>

Frequency

pub const fn txpower(self) -> Reg<Txpower, RW>

Output power

pub const fn mode(self) -> Reg<Mode, RW>

Data rate and modulation

pub const fn pcnf0(self) -> Reg<Pcnf0, RW>

Packet configuration register 0

pub const fn pcnf1(self) -> Reg<Pcnf1, RW>

Packet configuration register 1

pub const fn base0(self) -> Reg<u32, RW>

Base address 0

pub const fn base1(self) -> Reg<u32, RW>

Base address 1

pub const fn prefix0(self) -> Reg<Prefix0, RW>

Prefixes bytes for logical addresses 0-3

pub const fn prefix1(self) -> Reg<Prefix1, RW>

Prefixes bytes for logical addresses 4-7

pub const fn txaddress(self) -> Reg<Txaddress, RW>

Transmit address select

pub const fn rxaddresses(self) -> Reg<Rxaddresses, RW>

Receive address select

pub const fn crccnf(self) -> Reg<Crccnf, RW>

CRC configuration

pub const fn crcpoly(self) -> Reg<Crcpoly, RW>

CRC polynomial

pub const fn crcinit(self) -> Reg<Crcinit, RW>

CRC initial value

pub const fn tifs(self) -> Reg<Tifs, RW>

Interframe spacing in us

pub const fn rssisample(self) -> Reg<Rssisample, R>

RSSI sample

pub const fn state(self) -> Reg<State, R>

Current radio state

pub const fn datawhiteiv(self) -> Reg<Datawhiteiv, RW>

Data whitening initial value

pub const fn bcc(self) -> Reg<u32, RW>

Bit counter compare

pub const fn dab(self, n: usize) -> Reg<u32, RW>

Description collection: Device address base segment n

pub const fn dap(self, n: usize) -> Reg<Dap, RW>

Description collection: Device address prefix n

pub const fn dacnf(self) -> Reg<Dacnf, RW>

Device address match configuration

pub const fn modecnf0(self) -> Reg<Modecnf0, RW>

Radio mode configuration register 0

pub const fn power(self) -> Reg<Power, RW>

Peripheral power control

Trait Implementations

impl Clone for Radio

fn clone(&self) -> Radio

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl PartialEq for Radio

fn eq(&self, other: &Radio) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Radio

impl Eq for Radio

impl Send for Radio

impl StructuralPartialEq for Radio

impl Sync for Radio