Controls time and alarms time is a 64 bit value indicating the time since power-on timeh is the top 32 bits of time & timel is the bottom 32 bits to change time write to timelw before timehw to read time read from timelr before timehr An alarm is set by setting alarm_enable and writing to the corresponding alarm register When an alarm is pending, the corresponding alarm_running signal will be high An alarm can be cancelled before it has finished by clearing the alarm_enable When an alarm fires, the corresponding alarm_irq is set and alarm_running is cleared To clear the interrupt write a 1 to the corresponding alarm_irq The timer can be locked to prevent writing