Struct stm32_metapac::rcc::regs::Icscr

#[repr(transparent)]
pub struct Icscr(pub u32);

RCC internal clock source calibration register

Tuple Fields

0: u32

Implementations

impl Icscr

pub const fn hsical(&self) -> u8

HSI clock calibration This bitfield directly acts on the HSI clock frequency. Its value is a sum of an internal factory-programmed number and the value of the HSITRIM[6:0] bitfield. In the factory, the internal number is set to calibrate the HSI clock frequency to 48 MHz (with HSITRIM[6:0] left at its reset value). Refer to the device datasheet for HSI calibration accuracy and for the frequency trimming granularity. Note: The trimming effect presents discontinuities at HSICAL[7:0] multiples of 64.

pub fn set_hsical(&mut self, val: u8)

HSI clock calibration This bitfield directly acts on the HSI clock frequency. Its value is a sum of an internal factory-programmed number and the value of the HSITRIM[6:0] bitfield. In the factory, the internal number is set to calibrate the HSI clock frequency to 48 MHz (with HSITRIM[6:0] left at its reset value). Refer to the device datasheet for HSI calibration accuracy and for the frequency trimming granularity. Note: The trimming effect presents discontinuities at HSICAL[7:0] multiples of 64.

pub const fn hsitrim(&self) -> u8

HSI clock trimming The value of this bitfield contributes to the HSICAL[7:0] bitfield value. It allows HSI clock frequency user trimming. The HSI frequency accuracy as stated in the device datasheet applies when this bitfield is left at its reset value.

pub fn set_hsitrim(&mut self, val: u8)

HSI clock trimming The value of this bitfield contributes to the HSICAL[7:0] bitfield value. It allows HSI clock frequency user trimming. The HSI frequency accuracy as stated in the device datasheet applies when this bitfield is left at its reset value.

Trait Implementations

impl Clone for Icscr

fn clone(&self) -> Icscr

Returns a copy of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Default for Icscr

fn default() -> Icscr

Returns the “default value” for a type.

impl PartialEq for Icscr

fn eq(&self, other: &Icscr) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl Copy for Icscr

impl Eq for Icscr

impl StructuralPartialEq for Icscr