stm32-metapac

Crates

git

Versions

stm32f031g6

Flavors

Struct stm32_metapac::syscfg::regs::Cfgr1

#[repr(transparent)]
pub struct Cfgr1(pub u32);
Expand description

configuration register 1

Tuple Fields§

§0: u32

Implementations§

§

impl Cfgr1

pub const fn mem_mode(&self) -> MemMode

Memory mapping selection bits

pub fn set_mem_mode(&mut self, val: MemMode)

Memory mapping selection bits

pub const fn pa11_pa12_rmp(&self) -> bool

PA11 and PA12 remapping bit for small packages (28 and 20 pins) 0: Pin pair PA9/PA10 mapped on the pins 1: Pin pair PA11/PA12 mapped instead of PA9/PA10

pub fn set_pa11_pa12_rmp(&mut self, val: bool)

PA11 and PA12 remapping bit for small packages (28 and 20 pins) 0: Pin pair PA9/PA10 mapped on the pins 1: Pin pair PA11/PA12 mapped instead of PA9/PA10

pub const fn ir_mod(&self) -> IrMod

IR Modulation Envelope signal selection

pub fn set_ir_mod(&mut self, val: IrMod)

IR Modulation Envelope signal selection

pub const fn adc_dma_rmp(&self) -> bool

ADC DMA remapping bit 0: ADC DMA request mapped on DMA channel 1 1: ADC DMA request mapped on DMA channel 2

pub fn set_adc_dma_rmp(&mut self, val: bool)

ADC DMA remapping bit 0: ADC DMA request mapped on DMA channel 1 1: ADC DMA request mapped on DMA channel 2

pub const fn usart1_tx_dma_rmp(&self) -> bool

USART1_TX DMA remapping bit 0: USART1_TX DMA request mapped on DMA channel 2 1: USART1_TX DMA request mapped on DMA channel 4

pub fn set_usart1_tx_dma_rmp(&mut self, val: bool)

USART1_TX DMA remapping bit 0: USART1_TX DMA request mapped on DMA channel 2 1: USART1_TX DMA request mapped on DMA channel 4

pub const fn usart1_rx_dma_rmp(&self) -> bool

USART1_RX DMA request remapping bit 0: USART1_RX DMA request mapped on DMA channel 3 1: USART1_RX DMA request mapped on DMA channel 5

pub fn set_usart1_rx_dma_rmp(&mut self, val: bool)

USART1_RX DMA request remapping bit 0: USART1_RX DMA request mapped on DMA channel 3 1: USART1_RX DMA request mapped on DMA channel 5

pub const fn tim16_dma_rmp(&self) -> bool

TIM16 DMA request remapping bit 0: TIM16_CH1 and TIM16_UP DMA request mapped on DMA channel 3 1: TIM16_CH1 and TIM16_UP DMA request mapped on DMA channel 4

pub fn set_tim16_dma_rmp(&mut self, val: bool)

TIM16 DMA request remapping bit 0: TIM16_CH1 and TIM16_UP DMA request mapped on DMA channel 3 1: TIM16_CH1 and TIM16_UP DMA request mapped on DMA channel 4

pub const fn tim17_dma_rmp(&self) -> bool

TIM17 DMA request remapping bit 0: TIM17_CH1 and TIM17_UP DMA request mapped on DMA channel 1 1: TIM17_CH1 and TIM17_UP DMA request mapped on DMA channel 2

pub fn set_tim17_dma_rmp(&mut self, val: bool)

TIM17 DMA request remapping bit 0: TIM17_CH1 and TIM17_UP DMA request mapped on DMA channel 1 1: TIM17_CH1 and TIM17_UP DMA request mapped on DMA channel 2

pub const fn tim16_dma_rmp2(&self) -> bool

TIM16 alternate DMA request remapping bit 0: TIM16 DMA request mapped according to TIM16_DMA_RMP bit 1: TIM16_CH1 and TIM16_UP DMA request mapped on DMA channel 6

pub fn set_tim16_dma_rmp2(&mut self, val: bool)

TIM16 alternate DMA request remapping bit 0: TIM16 DMA request mapped according to TIM16_DMA_RMP bit 1: TIM16_CH1 and TIM16_UP DMA request mapped on DMA channel 6

pub const fn tim17_dma_rmp2(&self) -> bool

TIM17 alternate DMA request remapping bit 0: TIM17 DMA request mapped according to TIM16_DMA_RMP bit 1: TIM17_CH1 and TIM17_UP DMA request mapped on DMA channel 7

pub fn set_tim17_dma_rmp2(&mut self, val: bool)

TIM17 alternate DMA request remapping bit 0: TIM17 DMA request mapped according to TIM16_DMA_RMP bit 1: TIM17_CH1 and TIM17_UP DMA request mapped on DMA channel 7

pub const fn i2c_pb6_fmp(&self) -> Fmp

Fast Mode Plus (FM plus) driving capability activation bits. 0: PB6 pin operate in standard mode 1: I2C FM+ mode enabled on PB6 and the Speed control is bypassed

pub fn set_i2c_pb6_fmp(&mut self, val: Fmp)

Fast Mode Plus (FM plus) driving capability activation bits. 0: PB6 pin operate in standard mode 1: I2C FM+ mode enabled on PB6 and the Speed control is bypassed

pub const fn i2c_pb7_fmp(&self) -> Fmp

Fast Mode Plus (FM+) driving capability activation bits. 0: PB7 pin operate in standard mode 1: I2C FM+ mode enabled on PB7 and the Speed control is bypassed

pub fn set_i2c_pb7_fmp(&mut self, val: Fmp)

Fast Mode Plus (FM+) driving capability activation bits. 0: PB7 pin operate in standard mode 1: I2C FM+ mode enabled on PB7 and the Speed control is bypassed

pub const fn i2c_pb8_fmp(&self) -> Fmp

Fast Mode Plus (FM+) driving capability activation bits. 0: PB8 pin operate in standard mode 1: I2C FM+ mode enabled on PB8 and the Speed control is bypassed

pub fn set_i2c_pb8_fmp(&mut self, val: Fmp)

Fast Mode Plus (FM+) driving capability activation bits. 0: PB8 pin operate in standard mode 1: I2C FM+ mode enabled on PB8 and the Speed control is bypassed

pub const fn i2c_pb9_fmp(&self) -> Fmp

Fast Mode Plus (FM+) driving capability activation bits. 0: PB9 pin operate in standard mode 1: I2C FM+ mode enabled on PB9 and the Speed control is bypassed

pub fn set_i2c_pb9_fmp(&mut self, val: Fmp)

Fast Mode Plus (FM+) driving capability activation bits. 0: PB9 pin operate in standard mode 1: I2C FM+ mode enabled on PB9 and the Speed control is bypassed

pub const fn i2c1_fmp(&self) -> Fmp

FM+ driving capability activation for I2C1 0: FM+ mode is controlled by I2C_Pxx_FMP bits only 1: FM+ mode is enabled on all I2C1 pins selected through selection bits in GPIOx_AFR registers

pub fn set_i2c1_fmp(&mut self, val: Fmp)

FM+ driving capability activation for I2C1 0: FM+ mode is controlled by I2C_Pxx_FMP bits only 1: FM+ mode is enabled on all I2C1 pins selected through selection bits in GPIOx_AFR registers

pub const fn i2c2_fmp(&self) -> Fmp

FM+ driving capability activation for I2C2 0: FM+ mode is controlled by I2C_Pxx_FMP bits only 1: FM+ mode is enabled on all I2C2 pins selected through selection bits in GPIOx_AFR registers

pub fn set_i2c2_fmp(&mut self, val: Fmp)

FM+ driving capability activation for I2C2 0: FM+ mode is controlled by I2C_Pxx_FMP bits only 1: FM+ mode is enabled on all I2C2 pins selected through selection bits in GPIOx_AFR registers

pub const fn i2c_pa9_fmp(&self) -> Fmp

Fast Mode Plus (FM+) driving capability activation bits 0: PA9 pin operate in standard mode 1: I2C FM+ mode enabled on PA9 and the Speed control is bypassed

pub fn set_i2c_pa9_fmp(&mut self, val: Fmp)

Fast Mode Plus (FM+) driving capability activation bits 0: PA9 pin operate in standard mode 1: I2C FM+ mode enabled on PA9 and the Speed control is bypassed

pub const fn i2c_pa10_fmp(&self) -> Fmp

Fast Mode Plus (FM+) driving capability activation bits 0: PA10 pin operate in standard mode 1: I2C FM+ mode enabled on PA10 and the Speed control is bypassed

pub fn set_i2c_pa10_fmp(&mut self, val: Fmp)

Fast Mode Plus (FM+) driving capability activation bits 0: PA10 pin operate in standard mode 1: I2C FM+ mode enabled on PA10 and the Speed control is bypassed

pub const fn spi2_dma_rmp(&self) -> bool

SPI2 DMA request remapping bit 0: SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 4 and 5 respectively 1: SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 6 and 7 respectively

pub fn set_spi2_dma_rmp(&mut self, val: bool)

SPI2 DMA request remapping bit 0: SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 4 and 5 respectively 1: SPI2_RX and SPI2_TX DMA requests mapped on DMA channel 6 and 7 respectively

pub const fn usart2_dma_rmp(&self) -> bool

USART2 DMA request remapping bit 0: USART2_RX and USART2_TX DMA requests mapped on DMA channel 5 and 4 respectively 1: USART2_RX and USART2_TX DMA requests mapped on DMA channel 6 and 7 respectively

pub fn set_usart2_dma_rmp(&mut self, val: bool)

USART2 DMA request remapping bit 0: USART2_RX and USART2_TX DMA requests mapped on DMA channel 5 and 4 respectively 1: USART2_RX and USART2_TX DMA requests mapped on DMA channel 6 and 7 respectively

pub const fn usart3_dma_rmp(&self) -> bool

USART3 DMA request remapping bit 0: USART3_RX and USART3_TX DMA requests mapped on DMA channel 6 and 7 respectively (or simply disabled on STM32F0x0) 1: USART3_RX and USART3_TX DMA requests mapped on DMA channel 3 and 2 respectively

pub fn set_usart3_dma_rmp(&mut self, val: bool)

USART3 DMA request remapping bit 0: USART3_RX and USART3_TX DMA requests mapped on DMA channel 6 and 7 respectively (or simply disabled on STM32F0x0) 1: USART3_RX and USART3_TX DMA requests mapped on DMA channel 3 and 2 respectively

pub const fn i2c1_dma_rmp(&self) -> bool

I2C1 DMA request remapping bit 0: I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 3 and 2 respectively 1: I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 7 and 6 respectively

pub fn set_i2c1_dma_rmp(&mut self, val: bool)

I2C1 DMA request remapping bit 0: I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 3 and 2 respectively 1: I2C1_RX and I2C1_TX DMA requests mapped on DMA channel 7 and 6 respectively

pub const fn tim1_dma_rmp(&self) -> bool

TIM1 DMA request remapping bit 0: TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 2, 3 and 4 respectively 1: TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 6

pub fn set_tim1_dma_rmp(&mut self, val: bool)

TIM1 DMA request remapping bit 0: TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 2, 3 and 4 respectively 1: TIM1_CH1, TIM1_CH2 and TIM1_CH3 DMA requests mapped on DMA channel 6

pub const fn tim2_dma_rmp(&self) -> bool

TIM2 DMA request remapping bit 0: TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 3 and 4 respectively 1: TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 7

pub fn set_tim2_dma_rmp(&mut self, val: bool)

TIM2 DMA request remapping bit 0: TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 3 and 4 respectively 1: TIM2_CH2 and TIM2_CH4 DMA requests mapped on DMA channel 7

pub const fn tim3_dma_rmp(&self) -> bool

TIM3 DMA request remapping bit 0: TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 4 1: TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 6

pub fn set_tim3_dma_rmp(&mut self, val: bool)

TIM3 DMA request remapping bit 0: TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 4 1: TIM3_CH1 and TIM3_TRIG DMA requests mapped on DMA channel 6

Trait Implementations§

§

impl Clone for Cfgr1

§

fn clone(&self) -> Cfgr1

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
§

impl Default for Cfgr1

§

fn default() -> Cfgr1

Returns the “default value” for a type. Read more
§

impl PartialEq for Cfgr1

§

fn eq(&self, other: &Cfgr1) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
§

impl Copy for Cfgr1

§

impl Eq for Cfgr1

§

impl StructuralPartialEq for Cfgr1

Auto Trait Implementations§

§

impl Freeze for Cfgr1

§

impl RefUnwindSafe for Cfgr1

§

impl Send for Cfgr1

§

impl Sync for Cfgr1

§

impl Unpin for Cfgr1

§

impl UnwindSafe for Cfgr1

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

source§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.